Community Brag Posts

Here is an industrial style coffee table I recently built.  I used reclaimed pallet wood for the top and shelves and I built the shelves to be removable if needed.  For the finish I used oil based poly in a satin.   

@timberandsoul 

www.facebook.com/timberandsoul

Built for my daughters 2nd birthday. 

Using Ana's plan as a guide, I built two of these sofas to fit an outdoor cushion I already had. I used wood from our old deck -- a great way to re-use and save money, too!

I went ahead and splurged on this project. It's all oak with a clear finish to show off the wood. I also put full extension slides on all the drawers. The bed is solid. It doesn't move a bit.

I used cedar siding that was removed from a home remodel. I had to rip all the wood down on a table saw to work with the plan. I was glad to put this good wood to use for my recycle bin and it looks good on the back porch. I had to change the plan a bit to fit my bin.

This is a turned leg coffee table that i built for my mum. the top is reclaimed and the legs were found on a cheap craigslist side table!

I used corner brackets to secure the legs so they could be taken on and off...as i needed to ship the table in the mail.

The boards on top were already distressed but i used a gooey month long festering vinegar and steel wool concoction to add even more interesting layers.

I am so happy with the table and my mother is in love with it!!!!

Thanx again for the great plan and resource that helped me build it!

Using your shed plans, modified to use the 2x4s I already had on hand, I designed this 4'x8'x7' shed to match my house.  I replaced the ceder fence boards with a hardiboard, but the construction was pretty much the same.  My husband and I are so happy with this shed,which looks very similar to the $4000+ sheds we have seen, and it cost us less than $400 to make and matches our house perfectly.  Your instructions were great, and I know you saved me a lot of time and trouble.  Can't wait to load it up with our snow and gardening equipment!  Thank you!

Another project in keeping with my original theme of farmhouse style furniture. I liked the style of this table but wanted to make a smaller end table than the plans. So I scaled down a bit and used 1x4 for the top and bottom shelves and used 1x also for the X. It measures standard height for an end table but its only about 18 inches square. I added some hardware, but not the L brackets on the corners. I have young kids and was a little worried about the edges.

After 10 years of kicking around back packs and shoes that are always in the way, my wife decided she would like a Hall Tree for our foyer. For the last year or so I have been gathering ideas from the internet and putting plans together in “Sketchup”. I wanted to re-purpose some old doors and door knobs and was fortunate to find them at local auctions and antique malls. I’ll have to say that finding a pair of matching solid wood doors was the hardest thing to do. I was lucky to find a pair at an antique mall, and only paid $36 for both. The porcelain door knobs are used for hanging our jackets and coats. I found several of these at an auction. I used a piano hinge for the bench and installed a soft close hinge made by “Sugatsune” which I found on “Amazon’s” website

 Not cheap but well worth eliminating the dreadful slamming sound of the bench door. I had never distressed anything, but this and my wallet received plenty during the build. I’d have to say the best part of the build was working with my little cookie monster. She was always wanting to help, and I’m gonna let her because you all know as well as I that those days won’t last forever. Not a professional by any means, but Thanks for looking.

We made our bench 17-1/2 inches longer, just enough for a third panel on the back.  We also added 2 braces under the seat slats to give it additional strength.  A lot of fun to make!  Thanks, Ana!

Very excited to have our bench, table & doll chair out on our porch. Thank you so much for your great web-site and all of the wonderful plans. I have already put together a very long "weekend projects" list for my husband to work on.

I had to redesign the top because my wood was too narrow and warped to make it as per the plan, and I'm too cheap to go and buy some more. I think it worked out OK. I enjoyed making this piece and I'm trying to develop my accuracy in wood working. My patience for the "finishing" element is improving, but I'm still a Sand-a-phobe.

These plans were perfect for the small space we had for the kitchen table.  Really like how the benches fit under the table too.