Community Brag Posts

I saw the plans for this on Ana White. It looked great so we decided to make one. We had just gotten a cal king mattress. We took the list of materials and cuts we needed to our local Home Depot. They cut all our wood for us. When we got home assembly was easy. Bed put together and paint on in 4 hours. We love it as do our dogs. One of our dogs is getting old so my husband made steps so she could get up on the bed. We love it!!!!

First of all, thank you for the inspiration and foundation for my daughters bed! I knew I had to be a bit creative from the start because the plans were for a twin size and I was building a full. I used your plans for a place to start and ended up putting my own twist in where I could. This is an interactive build complete with the bed, a dry erase board, plenty of cork board, TONS of storage, and a "secret" compartment behind the dry erase board. Oh, and the fully functional desk that my second grade daughter uses to the full extent. Thank you for what you do Ana, without your inspirations this couldn't have happened!

Built the kentwood twin for my daughter from Ana’s free downloadeable plans. Build was very easy and had a blast. Total cost was between $60-$70. Can’t wait to start my next project! 

This was my first project, an introduction to saws and drills, after my pug ate a bag of chocolate that was sitting next to my bed. The plan was picked because it said "simple" and had a drawer to safely store remotes. And chocolate.

I made this wine cabinet for my daughter Alicia from a picture she sent me from one she had seen someplace

This was something my wife needed for the kitchen. I told her to find one that she liked and I would build it. This took about 6 hrs because I was building from a picture and no measurements. I dropped the shelf a little lower so my wife could store her mixer and stuff on it. Needless to say I think it came out pretty nice. We are still going to paint it and put one more coat of stain on the top.

This was my first Ana White project and it turned out beautifully if I do say so myself! 

I made this workbench for my son's 5th birthday. It's a bigger style real workbench for kids. He also received real tools for his birthday. I modeled after a one that PBK used to sell.

Quick and simple little picture frame.

My mom had been wanting a corner cabinet in her dining room forever but every one we found was mad expensive. So I built her one as a gift. She loves it! I used left over paint from her dining room walls so the colors match exactly.

My nephew and his wife are expecting a new baby. This is my e-husband's nephew and we wanted to do something different than I have ever done so the former in-laws wouldn't  recognize the work. I sent them several pictures and this is the one that they choose. I drew up simple plans and put one together. I didn't like the first one so I built this and I absolutely love it. It took me 1 full Saturday, a week of breaks (I come home at breaks from work to work in my garage), an hour each night and a few hours the second Saturday. The hardest part was making the holes for the slats. I used a 1/2" auger bit to make 3 holes and then used a carving tool to make them the right size. It felt like it took forever. Lots of router work but I think this is the best thing I have made thus far. 

This was actually my first build. I had just about had it, went with all three kids, got the wood, and built it while my hubby was at work (24 hr. shifts at the fire station). And yes, that was after I finally Googled, "How to unlock a Dewalt Compound Miter Saw" after 30 minutes of unsuccessful prodding! :-) I'm super happy with how it came out (despite the poor flashy picture)! And it was great "practice" for doing my girl's farmhouse beds.

This was hard for me because I am horrible at using the jigsaw. If I do another one I'll probably not do as many door openings.
It took longer than expected due to filling in all the pocket holes an waiting for the wood filler to dry.
My grandson loves it, he didn't care about my mistakes on it.

House numbers 

I used Ana's plans for the play stove, fridge and sink. I LOVED Crafting Chick's take on it so I copied her great accessories. I found my knobs at Walmart and my hooks at Hobby Lobby. I also found the fabric at Hobby Lobby. I used 3/4" hardwood plywood, but if I could do it again I would have used MDF. It's much smoother! I still love it though! Oh... So do the kids ;-)) You can read more details at http://www.shanty-2-chic.com/2011/07/play-kitchen-reveal.html.

We started with the bench as a weekend project. After counter-sinking and filling all those screw holes we borrowed a Kreg jr and took onothe table project. However we ended up countersinking the top boards for the table as well; it was easier for us to visualize the spacing between boards and make sure everything was as square and level as we could make it... We used behr paint and primer in one in a satin finish and opted for a punchy green to brighten up our courtyard.
We plan to build another bench since it will tuck in nicely under the table when not in use, and we can pull the table out and use the bench when we need more seating.
We love our new outdoor furniture!! Thanks Ana!

Took me a bit longer since I had to make a new cutting list as my table was smaller.  Plus, the wife wanted a really dark rich stain on it so several coats went into the stain.

Took roughly 15hrs and $500... We bought the top at Lowes for $150 on sale (Acacia), because it turns out butcher block counter tops of this size (considered an "Island" top) are like $500 and I don't know who can afford those shenanigans but certainly not us. Interesting point: in as much as I totally appreciate the design (Thank You Ana!) the instructions are mostly beautiful but have a few key areas with room for improvement. If you are thinking of building this take some time to go over all the materials and really map out the project. I purchased everything in 8' lengths as per the shopping list, I realized afterwards that because my unit is only 5' long I now have many 3' cut-offs.... had I purhased 10' lengths, you see where I'm going with this yes? I would have paid more per board but had less leftovers. I think I also have a package of unopened screws and an extra board from the shopping list, no big deal, it's like the 10 hot dogs for an 8 pack of buns conundrum, I've now entered an infinite loop. I also realized too late that to use the pocket hole screws to secure the counter top I would need to drill the holes (using my handy dandy Kreg Jig) before putting the slats on the top shelf or else I couldn't get my drill in, rookie move I know...You may find, as I learned, Lowes/Home Depot do not carry such things as 4x4s that are not pressure treated and therefore not ideal to have in one's kitchen...I ended up purchasing all the lumber at an actual lumberyard (Peacock Lumber, Oshawa, Canada), which was cool, because now I know where that place is, and it smells nice. Have fun with your build. I tried to post some other pictures but they kept coming up sideways, story of my life. Take a look on Facebook if you want Adam Connor in Pickering, Canada, I'm not shy ;-)