Community Brag Posts

My sixteen-year old son took this on as a summer project and built four bar stools. He did a great job! We lowered them by 4 inches from the plan specs to fit under the counter. He used a Miniwax Colonial Maple finish. This project took a lot of Kreg Jig screws and plugs - almost 100 of each. They are very comfortable and beautiful.

This is the first piece of furniture we've ever built and we are hooked.  We used a 2x12x6 for the top and 1.5x1.5 for all the support.  We just measured the height of our couch and away we went.  This table is so sturdy and fills a need in our home. My husband and I enjoyed spending the afternoon putting this together.  I did a color wash on the wood instead of stain.  We came in well over the price point, but that is due to where we live.  

This project was simple and my husband didn’t have any issues following the plan. We did have to use an extra 2x4, because we didn’t cut the long pieces first. Cut the long pieces first, use the end pieces to make the smaller ones. :)

I was reading a book called "ADD Friendly Ways to Organize Your Life", and one thing that stood out to me is that people struggling with ADD RARELY are able to fold and put away their laundry. Well, with 3 little boys (ages 5, 4 and 2)and being a single mama, this is amplified for me. One of the suggestions the book had was to give up the though of folding clothes and get colorful baskets to throw the clothes into once they came out of the drier. . . I immediately remembered seeing these, and I thought, "PERFECT!!!!"

I've made for 2 out of the three boys, but will make for myself and the youngest soon. The older boys now have their own dresser; shirts on top, pants in the middle, socks and underwear on the bottom. Now all I have to do is sort straight into the baskets and put away! Problem solved!

I didn't put the backs on these, mainly because I was being cheap, and they seemed sturdy enough without. I may add backs at a later date if needed.

Really like the plan for this table, just not enough space. So I decided to shrink the overall length to 45 1/2 and then just adjusted from there. Stained the entire project and painted the base. After some sanding to distress, I poly coated the entire project. Staining the top and the X's to match was my wife's idea. It came out great. This was only the second thing I have ever built, and I have to say the Kreg Jig made it fun, rather than frustrating and stressful. My first project was from the adirondack table plan, it came out great too. So glad I found your site!

A joint effort between my dad, my husband and I!  I love the way it turned out!  The painting was a little time consuming but totally worth it.  Cannot wait for my daughter to see this on Christmas morning.  My dad even made a little crib and highchair, which are just adorable!

Adjusted the dimensions to make it smaller. I used scrap plywood and mdf for the base. I used oak for the top. I routed the top instead of using edge trim. I added a USB charging outlet on the table top that plugs into an outlet.

Please forgive me for this for being a bit long....but i am excited!
Our daughter picked this beach hut bed to be her new bed that she would be getting for her 3rd birthday. Her older sister has a loft bed and was always climbing up so we liked the idea of it being lower for her. I had saved some pics from other sites and then showed them to her, she didnt want the girly house one's :( no she wanted the one i had actually saved for her brother. lol...
Anyway then i went hunting and could not believe my luck when i came across this site with this bed and plans!
My husband...ye of little faith didnt think we could do it but was willing to follow my lead and have a go!
This was our 1st ever time for builing ANYTHING!
And what a undertaking, however it all came together very smoothly and we are both so very proud of what we have been able to achieve.
Things we did a little different...
We altered the ladder on an angle to make it easier for her to climb (alas also for her 20mth old brother as well), also made the ladder upright supports x3 instead of x2, so the ladder now supports both our weights.(see pic) We made little window sills on each of the windows, added a book shelf inside as she is an avid 'reader' screwed in a light from you will know where. :) On the other 'open doorway' side which is against the wall we screwed on 2 x cross beams using 1x2 pine just for our own sakes to know that she cant fall from that side. We also added some dowell fixed with some saddle clips to hang the material from across the open section.
She has been using this bed for 2 weeks now with no problem.
You have made our daughter a very happy little girl,and parents (she is having day sleeps again now:)) because without your site we would not have known where to start. Thankyou very much.

Here's my version of the plans.  Not a big difference but i used triangle supports for the mattress instead of strips of 1x1.

All pine stock from Home Depot. I had to mill some ofvthec2 x 6s to get straight edges for the top. Dark walnut stain. 3 coats varathane. Came out great! Thanks for the plans Ana!

The Kids Adirondack Chair. I love these little chairs! Simple and easy to build. This one was a birthday present for my niece's daughter. Read more about this project on my blog.. Thanks Ana!!

Easy to follow, we made in a weekend. We tweeked our dimensions a bit but otherwise pretty straight forward. We ended up staining half and leaving other half natural then put a varnish over the entire shelf. Turned out pretty neat with the two tones.

I picked up a piano stool screw from Lee Valley tools

I decided to build my potting bench out of all cedar. I added some extra reinforcements, especially under the table top and shelf, since cedar isn't the strongest wood around. But I love the look!

This was a fun cute project to start with. My husband assembled it (though I wanted to do it he didn't let me). I used spray paint. Though I wish I had made it with a bit sturdier wood or maybe used wider sizes. but overall this turned out well and the kids LOVE IT! thanks Ana!