Community Brag Posts

This was such an awesome plan for us. We have two phones, two kindles, a tablet, a laptop, lamp dimmers and heated mattress pad controls. Needless to say the wires got a little out of control. The plans were super quick and easy, and it was no hassle to make two of them. I used the same stain combo Ana used on her's but I finished with Miniwax Polycrylic for extra protection against wet water glasses, early morning coffee spills and dog slobber. I love the rustic earthy tone the stains make. Dresser set soon to come! P.S. the center pieces on the doors are left over oak scraps I had in 1/2" thick. Thus, they stained a bit more red than the pine boards. I was worried about the contrast but I really like the way it turned out.

I modified the dimensions of the pocket hole farmhouse table plans so the table would fit our smallish dining room.  60 inch table and matching benches from the Friendly Home.  It turned out great!  We couldn't be happier.  This was our first build.

Thanks Ana!

-Chad

Absolutely in love with this table. It turned out even better than we thought since this was my first diy project. We didn’t want to spend thousands of dollars buying a table similar to one we could make ourselves so we decided to give it a go. Our biggest issue with building it was the wood warping. We could only work on it every other weekend so the wood starting moving and it wasn’t on a flat surface. Definitely tie it down to a flat surface if you can’t build it all in a few days. We reinforced the breadboards with pocket holes on the inside and out because the first time we only did the inside, it snapped off. We used a lot of glue the second time around. Will definitely be making more tables in the future.

I liked Sausha's original design of the washer and dryer pedestals, but I wanted to add a few little personalized touches to it.

First, rather than using MDF, I went with plywood because of cost and weight. Also, I chose not to fill in the imperfections of the surface of the plywood. The top piece will be covered by the washer and dryer, and the bottom piece will be covered by baskets, etc. I like the look of the imperfections, as well.

Lastly, I spent an extra $10 on some additional cap molding for the base and the top, just to give it a more finished look. My wife chose white over black to fit the room better.

This was my first project and I am excited to build more!

Thanks for the plans they were easy to follow. Complete the pair over two weeks, working on them a few hours at a time. I routed the tops at the wood shop on base for a small fee.

I changed the original plan a little so it would hold bigger items in the bottom shelves

My 2 year old daughter played in a playhouse at a farm and was just amazed by the "little house" every time we would see them at the store or driving down the road she would just scream "mom, its a little house, little house!" I knew I wanted to get her one and started to search. Couldn't believe the price of playhouse kits so I figured I could build it. This playhouse took about 2 weeks to finish but I only worked on it a couple of hours at a time just a couple times a week. Total cost for me for just the playhouse not including paint was $343.90. Thanks Ana for posting the plans and showing everyone that anyone can build!

My first project. I refinished my old dinning table legs and made a plank board table top from 2x6s. I gave a good coating of Varathane over the legs and the top to stand up to our daily life and kids.

I made this dresser for my daughter for Christmas. I followed the plans exactly except I made feet with 2x4 scraps instead of wheels.

100% reclaimed wood and hardware used for this custom pergola.  Designed to be more modern and simple cuts.

a quick and easy chair to build

This project was fun and easy to do. I made two of them so my husband and I could each work, watch movies or whatever while sitting in bed. The kids also use them sometimes during the day for playing on the computer or for having a snack. These little lap desks are super sturdy and very useful. They only cost me about $5 each to make.

My son and I bulit this 8x10 frame from a pallet for a Christmas gift for my dad, who is standing in the center. 

I built this table for my wife.  I added a 1/4 round to the edge of the table.  She did all of the finish work including the top which is Unicorn Spit and epoxy.  I turned out really nice.  Thanks for the plans!

Sorry there aren't more pictures of the building of it. We ended up rushing through it because a storm was moving in. In total it took about 4 hours to build the boxes and headboard. We already had the upholstered portion of the headboard that I made from scrap a few months ago so we made the bed to fit around it. We decided to leave it without a footboard so that we could slide things underneath easier. This has made storing things underneath very easy, we even keep our laundry baskets tucked underneath and we can have easy access. By making the cubbies slightly smaller we were able to make a total of 4 cubbies on each side and we can store all of our clothes and were able to get rid of our dresser.

This dollhouse bookcase was made by my Uncle Tom for my daughter. We can't wait to get it painted and get some fun furniture for it. He said it was a pretty simple project, and was able to get the materials relatively cheaper.

This is a fun and simple project to make. It consists of 12 pieces that are all the same size. The pieces are glued together to make 3 assemblies. Getting it apart or putting it together is the challenge. As always, there is a trick.

Build Instructions: https://www.instructables.com/id/Hexagon-Puzzle/

Solution: https://youtu.be/QUmHdIprCl0