Community Brag Posts

I made this charcuterie board for my niece and her family as a thank you for giving me an old miter saw they were not using… I have made a few now as gifts, and realize ….
Something “ made” means so much more to the recipient,
Because in the making we give our heartfelt generosity…
The stain is Watco food safe finish in hazelnut.

Ltr08

I have been searching for plans for a great end table that would look good in my living rroom when I canme across this plan! So i got cutting and building and this was the result . I am very happy with it and although its not perfect I learned a lot while building it and cant wait to start my next project! I thought with the angles and bevels in this project it would be a great precurssor to makign the benchwright dining table which is on my to-do list . Im glad I made this table first because now i will prevent some mistakes when making the dining table. The table wet together pretty quickly but the finishing took quite a while as I had to wait 2 hours inbetween each coat of lacquer.

Increased the 15.5" sides to 16.25" to fit the 32x16 pad I bought for a shower gift and it worked perfectly. Finish (all minwax) started with ebony stain, wiped of immediately, followed by layers of stain/poly mix in satin (each one thinner than the last) of Bombay Mahogany, Tutor, and then Espreso. Great plan, Ana.

I really liked the design of the Rustic platform bed, and wanted to make a small version for my toddler.  So I tweaked everything down to fit a toddler mattress, and then reduced the wood sizes for weight (2x6 became 1x6, 2x4 became 1x4).  First built with the slats design but was way too heavy, so went with a sheet of plywood.  Headboard is still 2x4 and 2x6.  I also got rid of the platforms so the bed could go up against the wall.  Finally, added the side rail guard so no rolling out onto the floor.  That required a new tool (yay!) and I bought a biscuit joiner to make it.  It took some effort to get it mounted to the bed rail, but it works.  In the end, my toddler loves it, and was so excited when I brought it in.  She loves having her own sized little bed that she can hop into (and out of) as she pleases.  Best of all, it's strong enough if she needs us to snuggle her, we can lay next to her.

I switched out my fall pumpkin decor for Christmas decor!

Built a fireplace using Mimi's Faux Mantle plans - I think it turned out great!

Built from Purebond plywood because I can't find straight boards in bigger sizes in my area (EVER!) and used fir 1x's for everything else.

Finished with three coats of Behr paint/primer in ultra white. I will not buy Behr again. Personal preference.

I ended up using Japanese cedar for the top. I was happy with the way this came out.

A lady I work with at Driscoll Children's Hospital is giving birth this week to a boy. Instead of the traditional gifts I thought he should have an airplane and the Plane Old Shelf caught my fancy.

I made a couple of minor additions to the design with the addition of the traditional red and green navigation or running lights on the wing tips and a bright yellow axle. The wheels, cowling, and buttons are from Hobby Lobby. I took a small piece of bass wood, soaked and bent it and then let it dry overnight to form the propeller.

In South Texas the color scheme means something. The wing tips,tail, and cowling of the single engine trainers the want-a-be Navy pilots fly carry this color. They are everywhere.

Made two tables with my sister in less than six hours! During this time we also went to the store, took many breaks and even ate lunch! A fun project that develops tons of confidence :) Made out of pine, used 3" steel casters, stained in espresso, and didn't use wood glue. Ate sushi on them tonight! Also.....a perfect table for sitting on the floor and coloring, using a lap-top, or toss some pillows on it for a sleepy pup. Super neat!

Industrial Bar Cart with Stemware Storage

I built a regular table, then added half inch plywood to the top. Once the plywood was screwed and secured, I began tiling. I glued the tile down, waited 24 to cure then grouted!! I added aluminum trim to finish the top. I used Ceadar to make the legs only and used pressure treated for the rest.

We used Ana's "Simple Lounge Chair" plan, used a few pallet boards with some scrap lumber we had laying around in the garage, and made an awesome patio set for less than $75! The only cost we had was in fabric for the cushions, which was an added embellishment we chose to do We purchased pillows from a local thrift store, and even a couple at a local garage sale for $2 each... added our own special flare to make it match the fabric, and wahlah!

I Created this closet system because I have a basement bedroom with no closets. The bar I bought from target was falling over from the weight of all my clothes so I needed something more sturdy. I found this plan and it was perfect. I got shelves and clothing bars out of one build. I modified the plan a bit to fit the room. I also wanted it to have a bar that could hold dresses so I eliminated one of the lower shelves. I also made it a tad wider because I am rather tall and wanted it to comfortably fit folded sweatshirts.

Built to fit. Custom lacquer finish!