King Bed
![](/sites/default/files/BedFrame_0.jpg)
I made this bed frame without the headboard, I just put the same legs on all four corners. This is one sturdy frame, but watch it, when you stub your toe, the bed doesn't give!
![](/sites/default/files/KingBed.jpg)
I made this bed frame without the headboard, I just put the same legs on all four corners. This is one sturdy frame, but watch it, when you stub your toe, the bed doesn't give!
I built this for my younger brother and his wife for their new home.
Followed the plans pretty much to the letter, made the sign reversible so it works for summer or winter.
3d printed the words instead of cutting out or purchasing wooden letters
This is my very first project. This is a cross between the Rustic X console and the Tryde media console. I liked the top of the Tryde, but the ease of the Rustic X.
I painted the trim in slightly off-white, the sides, top and shelf are done in a satin polyurethane.
I was amazed at how easy this was to make following your plans. The hardest part was getting my husband to let me use the power tools (most of which I have either bought for him as gifts or I owned before we got married). He says, "I thought you were afraid of the table saw?" Only when you use it, dear!
This took a day to build, and then forever to finish (it was like waiting for paint to dry ;)
Thank you for all of the amazing plans you have on this site. You may just be my new hero Ana!
Next up, a dining room table for my daughter, then the farmhouse bed for the other daughter. With a few tools, a little patience and couple of bags of O negative blood on standby, there is nothing you can't DIY. (I kid, I hurt myself with hand tools, never power tools).
Fri, 02/19/2016 - 07:34
WHat did you use to atteck the planks on the sides running up and down? Thanks!
Really enjoyed making this.. Shoes used to be everywhere, and really annoyed me. Great area to store away seasonal or occasional shoes.
I'm so glad I found your blog/website. It is exactly what I was looking for. I'm going to tackle the farm table & benches next and then adjust the porch swing plan to make a bed swing for a friend. Thanks for the great ideas!
Love your easy instructions! I used all 2x4's because it was made with left over wood from another project. I burned the top pieces to get the grain to stand out and painted the legs. I think they turned out beautiful. I also used your 2x4 Adirondack Chair Plan to match the bench.
Thanks,
Yvette
I needed a smaller table than the one I had, so I decided to build a new one. I loved the look of the Modern Farm table that was posted on this site and I just modified the plans to make it a 36" x 36" square. I finished it with a Kona stain.
My daughters decided they wanted to do a lemonade stand at their Nana's yard sale. I'm a beginner when it comes to woodworking projects so when I came across Ana's plans for the fence picket lemonade stand, I just HAD to give it a try! This was a fun project and the plans were extremely helpful and straight-forward. I would definitely recommend if anyone is looking for a cute lemonade stand for their kiddos! Side note - my girls raised $75 for the Alex's Lemonade Stand Foundation to help fight childhood cancer! So proud!
I can't thank you enough for these easy to follow plans. I'm not an experienced builder at all, but was able to build this queen size platform bed. I used Douglas Fir for all visible parts, and finished with minwax semi-transparent stain in walnut. I followed this with three coats of poly-acrylic. No one can believe I was able to build this myself, and frankly I can't either. What a confidence boost!
We built these beds Nov/Dec 2012 for our boys ages 2 & 4. This was our first furniture project. It was fairly easy but I did learn a few things along the way. They may seams dumb to most of you, but being our first project we encountered a few problems. My #1 tip is to cut your pieces, THEN SAND THEM. Before constructing the beds. We sanded afterwards, and trying to sand in the little gaps between the slats was hard. Like other posts, we had some trouble with the ladder. The side pieces were not long enough. We just re cut them and added another "rung". The finish is Valspar's Fly By Night blue. It is a very deep navy. Although I sanded my heart out and used a whole tub of wood filler they are still made using 2x4s and have dings and nicks that just come with soft woods. Our boys love them, and no they're not perfect but I think it will work to our advantage. Now when the boys act like boys I'm not away or stressing or any little dings they might be creating to the bed.
My first woodwork project from the DIY on this website and I'm very happy with how it turned out!
For the most part I followed the plans for the legs and base structure as suggested. In our area the 2x4s are sold with rounded corners. To avoid a very obvious seam on the legs, I used 2x6s which I screwed and glued together then cut back to 3x4 (1.5x2) x 4 to make the legs and cross beams a little beefier with little or no seem on the legs. As I decided to build the top from reclaimed wood I framed in the top with 2x4 ripped down to approx.. 2x3 with a sheet of plywood to support top boards. As I don’t have a planner to level any reclaimed top boards I could find, I decided to make my own faux reclaimed boards out of ¾’ x 9’ – 8’ planks. I distress the wood using a chain, rocks my table saw, hammer, nails, blowtorch and bow saw. In hindsight, I wish I had distressed a little more vigorously but everyday use will augment it over time. I continued to paint, distress and sand on the fly, using paints I had left from previous projects. In some cases, I mixed paints to get additional colour varierty. All boards were stained at the to colour bare areas which as a bonus added a slight yellow hue making the paint look older. I did some scraping and blowtorching of semi-dry paint and stain to get a variety of looks and textures. I dry fit the boards and reorganized the puzzle pieces to get a random but organized look – controlled chaos. Once I was close I glued and screwed the board down clamping as I went to keep the boards tight. This paid-off later as the tighter seams allow less food to fall in-between. I cut down the last row from over sized pieces to get a tight fit in the last row. I finished with 11 coats of poly to toughen up the pine and again to seal the seams from food. My wife suggested painting the legs off-white as our cottage already is max-ed out on natural wood. We will follow by painting the existing chairs the same off-white and adding a little distress for age. Cost was approx. $175 to 200. The plywood alone was $45, paint I had. Time was easily 50 hours as the artistic on the top, time although fun, was time consuming.
Anna’s website is great I have had many compliments on my table. I have pointed many people to the site for direction on their own projects. Thanks for the great plans.
Sandy
My grandfather built the base for this table decades ago. I never got to know him because I was very young when he passed. I told my mom that I loved this table and she gave it to me under the condition that we split it into two pieces. I get the base and she gets the top. That way I can build 2 tables from this and we can both keep the memory.
I made a new table top from Brazilian Mahogany and painted the base that was made from pine. Soon I will be making a new base to attach to the old table top and send it to my mother.
Minwax Antique Oil Finish is awesome. I have trouble with finishing and this worked like a dream. No stain was used.
Rustic x end table build
First ever wood project. Under $200 in materials! Less than a weekend of work (for two people). Beautiful results!!!!! Built from plans on Ana-White.com The only change we made to the build was adding some additional support legs in the middle of the bed.
We are expecting our first granddaughter in October 2021. We used Ana White’s plans for a baby changing table as our inspiration and this design was the outcome of our efforts. We surprised our son and daughter-in-law and they were elated!
We built a pair of these for our kids. Wanted to surprise them with a little shelf for each and it was really easy to do. Kids never saw them until it was all done since we bought the wood for this at the same time as we bought the wood for our own bed that we made.
Spray painted them using Krylon spray paint had more trouble locating appropriate paint (needed pink & purple seems most places didn't have this actually in stock!) than we had making the actual shelves. Took quite a few coats of paint though to get them looking nice.
Biggest complication that we actually had was finding the wood in suitable straight pieces. Ended up taking quite a while to select suitable pieces since most were bowed or warped to the point of being useless for our needs.
Final result though looks great and the kids absolutely love them. They are perfectly sized for water bottles and both kids had them in usage within mere minutes of them going up on the wall.
Tue, 04/30/2013 - 22:00
I love the colors you used for these, so bright and fresh! You've given me a great idea for a magazine rack in the bath room!
I recently found a photo of Pottery Barn Kids Box Train shelves. The have been discontinued, so I decided to build a set of my own. They were really easy! I was able to build 3 shelves from (2) 1 x 8's, (1) 1 x 4, and (1) 2 x 4. Plans, silhouette file, and printable image available in my blog post.
I always have heaps of scrap wood so I decided to make some lanterns.
These lanterns are larger than the last lanterns I made.
They are huge and they make a great statement.
I used old rusty fencing wire for the handles.
I also added some alluminium sheet to the 'ceilling' of the lantern so that there is no risk of burning.
The only cost was for the candles.
What to do with leftover twisted wood? Utilitarian single moms I straightenand make the outdoor sectional and table. Been wonderful.