Community Brag Posts

I made this a built-in cabinet instead of freestanding. I am so in love with how it turned out. My 15 year old daughter helped me build it, and we couldn't be happier. The total cost for this was around $300. The wood itself was only $200, but my drill died on me, so I had to get a new one. (Poor me, right?)

This new built-in has changed the whole look of my dining room. I just wish I had done this a year ago!

The plans seemed ok for me. I used all scrap lumber I had laying around. I bought a kreg jig in the middle of this project, after watching one of Ana's vidoes's about pocket holes. That is one reason why I built the 3 doors all twice, but also swapped out the top piece of the bin 3x's before I finally settled. In other words, I really struggled with this, but I was so excited to perservere and have this completed!  

I haven't wanted to make one of these for a long time. Thank you so much for the site and all the plans! I love all your work and your style. 

I built this cedar chest for a customer. I got the design from an Amish cedar chest company. Hardware from Lee Valley.

Todd Brown

This small but elegant side table was made based upon a plan from The Design Confidential. A friend of mine gave me a lot of 3/4" solid oak flooring that her deceased husband (11 years ago) had stored in a shed. It is beautiful. So I made this little table using the wood for the top. I made the top by putting Tightbond III glue in the flooring grooves and then clamping the pieces together. Then after the glue dried I used my flooring saw to rip the tongues and grooves so I have one solid piece of flooring/top. I also did not glue the top to the base but just used pocket hole screws from the underside to hold it on the base. The reason was in case the top or base became damaged it would be easily removable for repair.

This table was a lot of fun to make it wasn't too hard. The hardest part was cutting the dados. If you have a table saw, it's not as hard. I hope you watch the video of how it was made.
http://youtu.be/ymz3Zim79Lo?list=PLRGcaQeW9svX5lRtTc9w2LrOzEFoez3j0

Great plans!!  We modified just a little. Thank you!

My working area is 7 square metre, so I had to think how to get the most in it. I found Anas working bench and made me my own bench.

This doll crib is for another grandniece who loves both her baby boy and girl dolls, hence the Jack and Jill decal. This bed is modified from the Fancy Doll Crib plans using 1 x 2 for the side rails instead of dowels, and also a flat top. It is also larger than the plans: 21" long and 20" legs. My sister found a vintage J & J fabric piece which we plan to use as the mattress cover.

I said this is a day project but it takes me several days in between other activities, and I am very slow and methodical. (I also make sure to fill in all of the pocket holes with wood filler, usually two "coats" to get them perfectly level with the surrounding wood. After painting, it's very hard to tell where the fasteners are unless you know where to look.) It would take most people much less time than I. This is my 5th doll bed, and I have at least one more to go.

Simple/Fun project

Build Instructions:
http://www.instructables.com/id/Solar-Birdhouse/

Video of the build:
https://www.youtube.com/watch?v=SU5ffvweSjQ

I wanted a corner kitchen table.  I used the farm house table plans and made up the bench!

Guitar stand made out of Whiskey barrel staves. 

My niece wanted the purple AG loft bed for her doll. Since, the one online is $225 and back ordered until December...I came up with this one for free! I used scrap wood and fabric that I had left over from other projects. The bed has a built in desk top, shelves, cubbies, ladder, bulletin board, and coat hooks. It took me a couple of hours to build the bed and the chair and about an hour to sew the comforter and pillows. The painting took a little longer because I was out of purple spray paint! grrrrrrr!

My cousin is having a baby boy and needed a dresser for the little guy. I made this for her as a shower present. I love that it was made to fit her needs and that it is made out of solid wood. Not at all like the cheaply made dressers costing much, much more in the retail stores.
The blog from Katie and John from Sew Woodsy was not only helpful but very cute. Kudos to Katie for attempting a large project while prego. It couldn't have been easy.
The only change I made other than the color was covering the space under the dresser. She didn't want to have to collect toys from underneath the dresser or clean dust.
The plans were awesome and I would recommend reading the blog from Sew Woodsy. Their comments were helpful and so were the pictures.

My oldest son's room is only 97 square feet. We needed to add the maximum amount of storage in the small, awkwardly-shaped room. My husband and I decided to make a built-in bed using a couple of stock cabinets to flank the bed. Using Ana White's plans, we made 3 rolling trundle drawers to go underneath. 

DIY Wood Tiered Herb Planter

I have been wanting to build an entryway cubby for some time now and was excited to see these plans in the book! (Awesome job, by the way!). I modified the plans to fit my entryway space and also used all wood left over from other projects. I added the wood top too. Now I just have to figure out how to hang it!

I'm actually in the process of finishing the Apothecary media console so I used this project to test out the finish I was thinking about using.

Paint: Behr Premium Plus in Beluga, Flat finish
Wood stain: Minwax Dark Walnut, 2-3 coats (I did pre-condition the wood before staining)
Poly: Rustoleum Ultimate Soft Touch Matte

I love the Rustoleum soft touch poly-it dries so beautifully.
I did glaze the edges, too.

I'm planning to build the bench next and finally my entryway will be organized (hard with a 2 1/2 year old!)

I told my husband that I wanted to try a project since he was getting to have all the fun building around the farm. So we bought the materials and started this bench. It was so easy. The only things he helped me with were some of the measurements and to speed things along :) some of the cutting. The project took us about 2 days. I had some paint I was going to use on another project so I just used it. I have the bench under some trees by my grandkids' swing. Thank you Ana for all the plans you graciously share. I have made a point to visit your sponsors' websites and actually visit their stores when I am able. Go for it ladies. You can do it!!!