Community Brag Posts

This project was not as simple as I expected! For this little bathroom, the mirror is offset, leaving lots of wasted space above the sink so my friend asked me to build some storage. I thought this would be a great solution that could maybe move with her later on, and it turned out pretty well. My two problems were 1- I had to cut the steel pipe to fit the space and 2- my hardware store did not sell S-hooks that would fit over the steel bar.  I used 1/2 in steel bar, so I cut it with my Dremel rotary cutting wheel. It was a bit slow but it worked and once I cut halfway, I could just bend the pipe to break it at the cut. The two cut ends are not threaded so I had them each end into one side of a 3/4 T fitting. For the S-hooks, I bought ones that were about the right size, then bent them open wider using a large screwdriver and a crow bar as a wedge. Two large screwdrivers might work as well. Instead of the straps, I used a thin steel bar, drilled through one side. I am happy with how it turned out, took about an afternoon not including all the time thinking it out! Finished with butcher block oil.

Decided to make this on a whim, and we are very pleased with the results!

My husband and I built this counter height with specs of 351/2" high x 25" wide x 48" long. We are using it in our kitchen as a prep island.

My wife needed a new bookshelf in her classroom so I took this plan and customized it.  She wanted three shelves and to be able to fit a three ring binder on the shelves upright.  I mitered the top to have a finished edge all the way around the top.  I ripped about 1/4" off the back of the two middle shelves so I could put the back planking inside and flush.  I patterened 1x2's and 1x4's on the back to give a cool look.

We added a few things, like a tunnel, climbing wall and tire swing.  The unveiling was quite the reaction to watch.  

My first ever project. Gave it to my parents as Christmas gift. I had a lot of fun building it. Next time I will go easier on wood glue, because some areas that glue got squeezed out did not get stained.
Next project - corner cupboard.

I used the Ana White "Country Kitchen Island" plans to build.  The only changes I made was the table top, bead board instead of pine planks, three drawers, and mostly 3/4" plywood.  For the island top, i used the top of a maple desk and applied butcher block oil.  To make things easier I used plywood to keep everything square and used bead board (very easy to install) instead of having to join boards together.  After putting the shelves together I just used pine boards to cover the edges of the plywood.  I also installed three drawers for convenient storage.  

We built this huge 7' buffet for our living/dining room area.

I thought this wood sleigh was so cute, I made it for my mom for Christmas! It turned out cute, it was a good jigsaw exercise! I made it smaller, would probably make it bigger next time, but it's a good size for a table top. She loved it!

Built this bookcase for my daughter, only modification was to add the X's on the side. She needed to be able to store all of her books on it.  Love it!  I now have another family member that wants one just like it!

Tv console with sliding barn doors and an electric fireplace insert. Measures 83" wide x 31.5" tall x 18" deep. 

My oldest son really wanted a toy cash register, and he loves pretending he has a Bait & Tackle shop. I built the market base where the front side is for "Will's Stop 'n' Shop" and it can be turned around and used for "Wyatt's Bait and Tackle". The countertop holds the cash register and shopping basket perfectly. They are great Shopkeepers!

Used mortise and tenon joints. Primed, painted and distressed the wood. Top was stained. 

Full tutorial on the blog tamarasjoy.com

I built this basketball hoop for my sons room over a year ago and it has stood the test of time! The wood rim never cracked. Plus it looks fantastic :)