Community Brag Posts

Modified to Full sized, my first bed!

Really simple and quick plan, great for a first timer. I oughta know. This was the first piece of wooden furniture I've ever built. Thank you so much Ana!

I made a version of this crate for the top of my family's refrigerator. I didn't have enough scrap 1x3s, so I used 1x2s as well. Instead of using chalkboard paint, I stained the 1/4" front and painted "nourish" with white paint. I also used old drawer pulls I saved instead of cutting out handles.

Loosely based on the small cedar fence picket storage shed plan, this was my first attempt at making a storage unit with a roof. There was only one unplanned trip to the store (to replace two 2x4's that I cut to the wrong length). Pro tip: "measure twice, cut once" doesn't work if you measure the wrong length twice. Also almost lost two fingertips because I'm an idiot and forgot the most basic of safety rules for power tools, namely the "don't put your fingers near the blade of a circular saw when it's in use" rule. Very lucky to only come out of it with a good scare and some wounds that will heal without permanent damage. 

Changing table built for my first grandchild!

This was an extremely quick and easy project to complete. I really love how the ledges tie my dining room together and display all the great pictures of our family. Now I just need to get some more pictures and frames...

I needed a place for my daycare kids to sit and eat at lunchtime. I stumbled upon the bigger kids picnic table on Ana White, so I just had to build this!

Since I am on a tight budget, I once again searched my ol’ pile of wood outside and found most everything I needed except the tabletop pieces in which I found an old pallet and used pallet planks instead for the top. Since the pallet planks are a lot thinner than 2x4s, I put a brace underneath the tabletop which made it very sturdy.

I have the whole tutorial with lots of pics at http://teediddlydee.com/how-to-build-kid-size-picnic-table-out-of-old-r….

I followed the plan but added a drawer.  I had a drawer that I had previously built but it didn't fit that project. It just happened to be the right width for this, I had to cut off some on the length, and that turned out to be easier than I thought it would be.  I used wooden slides.

Our little guy decided at about 2 years old that his crib just wasnt going to cut it anymore. My wife and I had a blast throwing this together. A good tip is to use leftover pieces from the headboard to cut slats.  We love our wood projects, check out our facebook page. Wyvace woodworking.

Another perfect shelf to decorate my little basement bathroom. Plans were so easy to follow! A little help from my hubby with this one... We had to drill into concrete to hang it. I love the end result!

I bought two pre-cut 1/4 inch panels and adjusted the dimensions of the trim to fit the panels, using 1x2's and 1x3's. I painted before I assembled, which was where the most time was spent. Thanks Ana for another great project!

This narrow cube bookshelf is a very handy addition to my kitchen! I use this shelf to store cookbooks, our iPod speakers, and some other utilitarian odds and ends. I'm particularly a fan of how to facing on the front and back acts as a stopper to keep your items in the bookshelf. It did not specify in the plans but we chose to align the back facing piece flush with the bottom of the shelf and the front facing piece flush with the top of the shelf. You can see what I'm describing in the pictures.

This piece was fast and easy. I think there is a time when finish work is faster to be done once a piece is finished but this not one of those projects. This shelf would benefit from finish before assembly.

Finally, a place to corral all of the stuff on the patio!

What we really needed was a wood rack and buffet/usable surface for the patio, but this potting bench fit the bill perfectly because:
1. It's sturdy enough to hold all that firewood
2. I had all of the supplies already (2x4 scraps, leftover paint, screws, etc)

Free and easy? Yes, please!

Only real change is that I added an apron to the front of the top shelf, and used well-sanded fence slats for the top shelf instead of a regular 1x6 (it's what was in the garage already).

The towel bar is from Ikea. That was also an extra that was already on hand.

I built these three tables for my aunt.  She had specific dimensions that I had to alter the plans to fit.  All in all it was a pretty easy project.

18” Doll horse stable modified with a third stall turned sideways to house smaller horses for 12” dolls. Added shingles to the roof since I didn’t like how the plain plywood ended up looking. I kept the finish plain, but I may paint the base white and stain the shingles darker at some point. To add the third stall I just extended the base to 36”, built an extra truss but left off the bottom rails and added rails to both sides a instead of 1. I then added two posts with rails extending sideways to create the smaller stalls

I just recently decided to try my hand at woodworking. This was my second project, first one from Ana, super easy instructions. I hadn't gotten the straightest 2x2s, since I had done my shopping with a two year old in tow, but I got it to work. After I completed it, my husband tells me it actually looked good--he seemed surprised. Anyway, I built this tower so that our new parakeet will have somewhere to live and I can conceal his food and other supplies in the baskets underneath. Without making any adjustments to Ana's plan with the exception that out 1x12s are only 11 1/4 it is the perfect size for our little bird cage. Thanks Ana for the design and inspiration to do it myself!