Community Brag Posts

This was my first project to tackle alone. It twisted a little on me not having another set of hands to hold things square, but it stands straight and doesn't wobble! Good enough for me. Plus it is an outdoor piece of furniture. The plans were easy to follow and I added 3" to the height of the legs so it was the same height as my arm rests on my chair.

Thank you Ana for yout amazing plans for the triple pedestal table and bench! I modified it to work for the dimensions that I needed which brought it down to a double pedestal table and bench. It ended up as a 3'x5' table. I attempted the antique coffee stain technique but it wasn't taking so I just used the stain that I used on the table top instead of the coffee. I LOVE how it turned out!

Leah

Modifications adopted from two other posters.

Used a handheld propane torch to “burn” the wood and it turned out amazing! 

This was our first time building furniture. We built our new bed over the course of four days. We don't own any power saws so opted to give the cut list to our local hardware store who only charged us about $50 for all the cuts.

Day one consisted of picking up all the lumber, sorting into the three sections and labeling all the pieces. Day two was the longest day, lots of drilling and measuring and screwing and gluing and even the first two coats of shellac. On the third day we built the drawers, and finished coating everything with shellac. The last day was the installation of the drawer hardware, including the slides.

We're quite happy with the quality of our work, and appreciate the directions and plans. Though we aren't fine furniture makers, and probably none of our corners are 100% square, we finished in the time we thought, pretty close to budget, and with the satisfaction of doing it ourselves.

I've made 4 of these awesome chairs. The first two I did the same as the plans called for, and also made the stools to go along with them. Then I seen where someone had made the arms larger and added an extra board along the bottom to give it a more finished look, so I did the same and love these even better. Thank you for the plans.

Debora Cadene,
Atikokan, Ontario

Although I didn't use a plan from this site, I do have Ana to thank for giving me the confidence to go alone and build this from a drawing that my wife drew up. All of my previous builds were from plans on this site so to make this from scratch without any help makes this my favourite build to date.

Table

Top: 2x12s

Aprons: 2x6s. Trim purchased from Lowes

Legs: Purchased from Lowes

Fake drawers: 1x4 ripped to size. Knobs purchased from Lowes

Bench

Top: 2x12

End sections: 1x10 (may replace with 2x10)

Aprons: 2x4

Chairs were purchased separately. (I'm not that confident yet)

Awesome plan, used 10” boards and 6” wheels to add height. Also added hinges so that the top opens up for storage. Found some hardware to give it some personality. 

Ledge for my little baseball player!

Super Duper Easy

Built in 2 hours including time to change outfits on my daughters' poly-pockets, feed the baby dinner, and pick up kindergarten carpool.
and yes, I did it all on my kitchen table.

I was trying to find plans for a pot-rack that also holds the LIDS!!! By the time I reviewed half a dozen designs that didn't work, I had thought of one myself that works brilliantly. I can reach and store the lids from the ground (yes I'm short) as easily as I can the pots. I hung mine over the kitchen sink so it doubles as a pot/lid drying rack as well.

If you want details on steps I took, materials used, or mistakes I made, message me.

Happy building!

This was my first build, and the instructions were great. I ended building two of them for our porch. The strength of the chairs following the plans is perfectly fine. We have used them every day for the past 6 months and have had no problems. The base cushions were re-claimed from an old couch someone was throwing away. We ripped the old covers off, and my girlfriends mother sewed $9.00 shower curtains over top of them. (Purchased at walmart) The backs are just 4 inch foam purchased from Hobby Lobby. The stain was "blue jean". We love these chairs. Thanks Ana.

Made from leftover wood from other projects.  Adjusted the plan to accomodate the lengths of wood I had available.

Though I'd spent a few months crocheting a baby blanket, my mother also wanted something special and lasting as a gift for a future new family member. She tried to think of something unique, but kept coming up empty. I went online to help her, and looked for newborn items. Unfortunately, I just kept running into toys, toys, and more toys. Ones that would be "grown out of" quickly, too. It was late at night, and very quiet, the time when your brain is calm and sometimes things just dawn on you.

Why not a toy BOX? (And one already "worn in," so that it could take a lot of play throughout the years.) I knew right where to look for a plan--Ana White's website! It ended up being a gift for him from both of us, and while he's a little too young to notice it now, we hope it grows with him and brings him years of joy.

Thank you, Ana, for sharing your talent and helping us (and so many others) create something truly special. That old blanket can wait until Christmas!

Modified Farmhouse style bad. Used lighter wood for headrest and footrest. Changed measurements for Lithuanian size of mattress (200x160cm). For headboard panel were used pallets wood so it was necessary to paint it right. Also Added some trims for decorating edges.

I made two of these as gifts. I modified the plans for a smaller bench length and width. They are 33in long on the top with a 1.5 overhang. I chose to place the 1x4 on top at the end as it was easier to stain and finish. Instead of wood glue since it was finished I used 3 pocket hole screws in the back, 2 corner braces with antique bronze finish on the ends under overhang and 2 on the inside of the storage area and gorilla glue.this made it very solid. It also made positioning it easy as I screwed the corner braces to the bottom side of the 1x4 face. I measured for a 1in overhang and 3/4 of an inch for the thickness of the back board. By doing so I could simply place the board on top of the bench and center it for 1.5 in overhang on ends then simply screw in the remaining screw hole in the inside of the storage  compartment.

Designed from the Grandy Sliding Door console, but I modified it by extending it to 8ft wide, and added a media shelf to not cover remote sensors for my set top boxes. This is my first build from Ana White so it took a little more time and expense than I hoped only because of some startup tools I decided to get to help the process.