Community Brag Posts

The plastic desk drawer divider we had in this drawer got broken, so I made one from poplar 1x2. I made the pencil boxes large enough to hold an unsharpened pencil. The center box is big enough to put a screwdriver on the drawer pull screws, if they become loose. The divider is friction fit, with its bottom edges sanded smooth to make installation easier. Used screws to pull it together, since brad nails tended to drive pieces apart.

I turned my son's room into the TMNT Secret Sewer Lair. I created artwork using a 1x8 piece of lumber and printed images on laser paper I found online. Cost $6.99
I created the outlets by printing on laser paper and decoupaging them onto the coverings. The cost for decoupage glue at Wal-Mart was $3.00 for 4oz, called Mod Podge. Which was more than enough since I used the same technique on my 20yr old bunk bed and nightstand and had some to spare. However you must use a x-acto knife to cut away white space so that print looks apart of the furniture. The individual Turtle characters I purchased from eBay because it was free shipping they were $17.99 each. The round table I turned into nightstand was $9.00 at Wal-mart and I hand painted it along with decoupaging the logo on to it. Any questions feel free to email! I hope this helps with ideas. I was lost do to lack of ideas online.

This was my first build and the table looks great! The instructions given were right on. Thanks so much...

Hi Ana
My granddaughter is starting first grade in the Fall. She needs a desk so I checked out your site and found this simple yet functional project. It worked up in no time. Now Gianna just needs to pick a paint color.

I also found a slight boo boo in the plans. See the marked up cut list.
Thanks for all you do.

Built a "lemonade stand" for the kiddos, but wanted it to be more versatile so we named it Price Place Market (think Seattle's Pike Place...haha) All letters are cut out from a 1/4" plywood on a scroll saw. We used bead board instead of plain old plywood for the insert and finished it with a antique crackle. Marshmallow white over green tea. Can't wait for this weekend! Watch out people, the kids are irresistible as well as the lemonade stand! Get your wallets out!

I made two of these, one to keep and one for a birthday gift. No more crayons rolling off the table and breaking on the floor. As someone new to wood working, I split two boards on the very last holes before I finally got it right by using brad-point drill bit. This produced the cleanest holes as well. I scaled down the number of holes too, just a personal choice. They both turned out so cute!

I used the Farmhouse Table plans as inspiration for my concrete kitchen island. I doubled up on the stretchers to add additional support for the 3x5 (275lb) cast concrete top and reversed the legs to expose the notches which were cut using a table saw. I used two coats of Minwax Golden Oak stain and two coats of Minwax polyurethane for the finish. The galvanized lag screws on the end supports are decorative, not structural. I used galvanized plumbing pipe to support the shelves and accessorized with bottle/wine openers. The top required 3 80lb bags of Quikrete 5000 and was sealed and waxed using Cheng concrete products. Because the concrete top was cast off-site, I had to build an A-frame to transport it safely to the installation site.

8ft barn door console . Thanks Ana White for you free plans.

David

Spring is around the corner and I had no outdoor furniture. My boyfriend had just talked me into a new weber grill, which did not leave much budget for new outdoor furniture. That's when I came across this web site and thought 'I can do that'. So I talked me boyfriend into helping build this Simple Outdoor Conversation Set. We used plans for the Simple Outdoor Lounge Chair and Simple Outdoor Ottoman and then followed the alterations by post for 'My Modern Outdoor Patio Collection' to make the loveseat.

The whole project came together over 5 days.
Day 1: Cut all boards (5 hrs)
Day 2: Sand all boards (5 hrs)
Day 3: Stain all boards (6 hrs)
Day 4 & 5: Assemble furniture (9 - 10 hrs)

The total project took about 25 hrs and cost about $350. Here's the breakdown wood and supplies $204 from Lowe's for pretreated wood. $145 on cushions (NOT ON SALE); $60 for the seat cushions from Home Depot and $80 for the back cushions from Wal-Mart. We were originally planning on only having the seat cushions, but the seats were long when you set in them with your back against the bear wood (I was setting so far back, my feet couldn't reach the floor) so we opted for thick back cushions to make it more comfortable. The project finished up just in time for our first BBQ party! (March 2012)

This was my first project from this site and it came out beautifully!!!
I was lucky and got all my cuts at Home Depot for FREE so I only had to buy minimum hardware. Total cost came in under $200 and I highly recommend the Miniwax Gray.

Will probably add a scrappy short headboard, overall very pleased with the design and look

This was my second build and am very proud of myself. Never would I have imagined I would be able to build a piece of furniture!! It took me a little while to finish as I slowly bought the wood and worked on it here and there.

Made from one piece of plywood

This was made for a friend. I looked up Ana's original plan and modified it a little. The end result was something she was very happy with.