Community Brag Posts

We modified the farmhouse table plan and made office desks from reclaimed lumber! Check out the full post on my blog: http://livingvintageco.com/category/do-it-yourself/woodworking/.

My husband and I took two plans, the Mantel Moulding Headboard, and the Chestwick Platform Bed. We made some slight modifications which are as follows.

For the Mantel Moulding Headboard I wanted it to be a tall. The original plans called for the headboard to be 61 1/2 inches. We made ours so that it sat at 74 inches. We also made the width of the headboard 60 inches so that it was a perfect fit for the base.

For the Chestwick Platform bed we used 2X12's. Since we decided to make the headboard taller, I felt that the 2X8s wouldn't have been aesthetically pleasing. We used heavy duty top corner plates to screw in the bun feet.

Mounting the headboard: Due to the size of this headboard, it is recommended that you attach to a stud in the wall behind headboard to prevent forward tipping. We used french fleat picture hanger with wall dog mounting screws (200 lbs), read instructions. We attached two vertical 1X2's to the back of the headboard for added support, since the headboard rests on the platform bed. After the headboard was properly secured to the wall, and resting on the platform bed, we then installed four mounting brackets. 2 heavy duty corner brackets, and 2 mounting brackets. The heavy duty corner brackets are long enough to screw into the mattress supports, the platform bed, and the headboard (see pics).

This was our second project, and we couldn't have done it without Ana's help.

I followed Ana's basic table plans but modified it to have legs in the middle (6 legs instead of 4). I used ballisters/ banisters found out our local Habitat for Humanity Restore for the legs which helped cut down the cost. 

I couldn't see spending several thousand for outdoor furniture, so I looked at what you had done. It was so much easier and sturdier than I thought it would be. Thank you for all you do for the community.
I added the board on the back of the sofa to stop the cushions from slipping through. My wife wanted a fun color so we found a waterproof stain and had it tinted. I thought it came out very nice.

My husband and I are very happy with how this table turned out, we put it together in a couple of hours on a weekend. It took me a couple weeks of sanding and staining and sanding and staining to finish it, but it was worth it.
Decided to use up some previously bought stain, Minwax Polyshades in Royal Walnut, but it just wasn't getting as dark a color as I wanted, even after three coats, so I picked up some Varathane Gel Stain in Dark Walnut. 2 coats of that brought it up to a nice rich color.
I'd like to say that I'll never do that many coats of stain again, but I will probably have to go through the whole process again, as we have a in-progress matching side table that I want to finish the same. :)

I made these chairs for friend. Very sturdy and look great!

Came out fantastic!  I made this one for my son and have now been recruited by my daughter to make another!

We are in so in love with this finished piece! We made some modifications to the original plan to fit our needs. We made the top wider - 24" wide like the Pottery Barn original. We also used 4X4's for the legs and widened the distance between the legs to sit the shelves inside the legs.

We also built the second shelf. We created the second shelf to hold wine, so we modified the front of the shelf to allow for the wine bottle necks to rest. The handle was made from plumbing hardware. We got this wonderful idea from one of the posters on this site, I need to find their name to give proper credit, but it worked beautifully.

For the hutch, we also made modifications for our needs. We made it taller by 4" (so 40" tall). We used 1 X 12's for the shelves for a deeper shelf. We also raised the bottom shelf up to accommodate our Keurig coffee maker. We did not divide the middle shelf to leave a tall opening for some items we wanted to display. We also left a gap at the bottom of the hutch for cords.

Once built we distressed the entire piece, then stained with Provencial stain, and finished off with a semi-gloss poly.

The best thing, it cost about 10% of the price of the original!!

Child's chalkboard as a birthday present. "Frozen" inspired color theme. Received feedback that it would also work very well as a boutique store sidewalk sign.

I built this square table and 4 chairs. It was a really fun build!! It measures 41Lx41Wx30H. 

Table for 4 based off plans. I love the way this turned out! Really pleased with the finished piece.

Jenn

This was my very first project. I cut the wood during the week, to have it ready for the weekend. I intended this to be my summer project. I had so much fun, i completed building both chairs in a day and a half!!!!! I then ordered the foam which took a couple weeks. I ordered the fabric online. I had two large pillows which I covered and used them for the back cushion. The total cost for BOTH chairs was under $250.00. Looking forward to my next project. :)

Very easy project!

I am a huge fan of apothecary cabinets and fell in insta-love with this cabinet.  The open shelves on top are a great size for lots of entertainment equipment and consoles and the storage below is fantastic for everything else! 

One of the adriondack chairs you have shared...made with wood scraps so it cost nothing only the time to make. It's comfortable and sturdy.....and I loved making it

I'm slowly working on building the whole Simple Outdoor Dining Collection.
When my Mom and I moved into our new apartment, we spent all our money on new indoor furniture, and we have this really huge porch with a nice view and nothing to put on it. So as a surprise after we moved in, I made her the bench. She loved it so much that I decided to make the matching table for her birthday. The stack-able chairs will be her Christmas present, so stay tuned for that if you'd like to see how they turn out.

-The bench was about $20 for lumber, a total of $40 or so with stain and screws and everything.

-Table was about $60 for lumber since I couldn't fit the the 12-footers in my car. I probably spent a good amount extra on a bunch of 8 footers instead. Also wasted a lot of wood that way, but I will find a use for it. Definitely get the 12 footers if at all possible. No need to buy the rest of the materials again if you have left-overs from the bench.

I didn't modify anything on this set at all, it was pretty much perfect the way it was designed. Although I did add some 1x3's to the legs on the bench to make them sturdier- notice the corner leg rather than just a 1x4 by itself. Thanks for these plans Ana, you make me look good!

So I was inspired by the Ana-While posted Farmhouse Table a few months back.. Honestly I was a little concerned about building such a large piece as my first project but I decided to invest into some common pine lumber to give it a shot. I could have bought better woodworking stock, but I was concerned I was going to mess it up anyway so I chose to stick with Home Depot / Lowes grade stock to keep the cost down.

I made a few changes from the published design:

I wanted a very large table for entertaining during the holidays. I extended the design to about 10 feet long by almost 4 feet wide.

I also am not a big fan of the seams that are left between the boards when doing butt joints using common lumber. It was a bit of work, but I trimmed off about 1/4" of material from the side of each board to make their corners square instead of the normal slightly rounded profile. With enough planing and sanding, I was able to get a reasonably tight seam with just normal garage tools.

The third design element I added was pre-drilling each of the exposed screws with a 3/4" bit about 1" deep and filling those holes with a wooden dowel. This dresses up any screws used and in my mine makes the table look a bit more traditional. Im sure some people would say just use the dowel to secure the joints, but I just wasnt that brave for an inexperienced builder.

The finish was intentionally left uneven. THere are raises and small grooves in the surface that I sanded down with 80 grit, but then only lightly went over with 150 and 220. The effect I was looking for was a surface that looked hand sawn / worked but that was still smooth to the touch and not 'dangerous' to use daily. There are some visible sanding and planing marks, but they are all soft and smooth, and help add depth and character in my opinion.

More pics available on my public facebook album: https://www.facebook.com/media/set/?set=a.10152583224649571.1073741829…

Supplies cost about $300 for lumber and finish materials. 

The face is made from 4 2x10's and 1 2x12 in the middle. 

The legs are 4x4, all other pieces are 2x4.

Tools needed to finish the table this way:

Circular saw

Table saw (to trim edges if you want tight seams)

Kreg Jig (essential for pocket holes!)

Very big clamps!   I did not have these and spent $90 or so on the 3

Hand saw

Chisel

Drill

Sander (or a LOT of patience!)

Planer (I used a cheap power planer to help level out the cheap big box lumber and to even out the joints)

STRONG sawhorses.  I broke a set of 600# rated horses re-positioning the face.   A 10ft table face is very heavy!  get help!

Finishing the table this way took a long time.  Im going to guess 60 - 80 hours went into it.  A ton of time is used getting the joining work right.  The rest of it goes together pretty quickly.

First big project. First time with the Kreg jig.  Some hidden defects but looks great in pictures!