Farmhouse Bed Mod
![](/sites/default/files/20220508_141010.jpg)
Took the Farmhouse bed model and incorporated a geometric headboard. This thing is heavy!
![](/sites/default/files/headboard1_1.jpg)
![](/sites/default/files/headboard2_2.jpg)
Took the Farmhouse bed model and incorporated a geometric headboard. This thing is heavy!
This was my first project from the plans I got from this site. I had a blast building it. Made it out of poplar so that it would be strong enough to support either me or my wife on it with our daughter. Directions were simple and easy to follow. Key to this project as mentioned is to be precise in measurements and square! My wife and daughter both love this bed and now have 3 more projects lined up for me. I am so lucky!!! What family wants you and urges you to build more things from wood!
Wed, 07/13/2011 - 15:38
Love the colors! We are going to do a combo of these plans and the cottage loft bed for my step daughter. She's almost 7 and really too tall for the cottage loft bed but she wants the playhouse look of it. I'm hoping of coming up with a way to remove the "walls" when she's a little older. I'm thinking of putting it in a corner like you did and then just do the exposed side and front. Your family is very lucky you are so willing to build for them:)
I have always wanted a fireplace, however I couldn't justify spending $600 or more for a flimsy electric TV stand. Not to mention, I have checked out the displays of these pieces at Lowes, and they are made from cheap materials that I do not want to sit my expensive TV on. We found the entertainment center on Craigslist for $100, because they got rid of their big projection screen TV (which many are doing these days). I looked for fireplace TV stands for months, and just couldn't find a piece that wouldn't look like a separate piece of furniture stuck in the middle. I found a new electric insert on Criagslist for $100 (normally about $250), and purchased the materials from Lowes where a nice employee cut it all for me. I glued and nailed the frame together, applied the AirStone, attached the mantle (a 2x4), and slid the insert into place. Overall, the project took about 4 hours to complete, and cost about $200 to build. (It could have been done for a bit cheaper, but I went with 3/4" plywood for strength and stability.)
Wed, 08/14/2013 - 10:28
I have an electric fireplace that is made with cheap materials. I've contemplated building a new surround for it, and your finished product and the pictures have made it seem more doable! Thanks for posting.
Adaptation to fit my little mitre saw, small workshop and the metric timber available in B&Q. My first build, this should let me build more while staying comfortable and safe. I'm ridiculously pleased with myself!
It took longer to build than expected because my little boy thinks naps are for wimps.
In case anyone in the UK wants to build similar, here's my adapted sizes.
18mm plywood cutting list:
2 85cm x 50cm (sides)
3 50cm x 50cm (shelves)
2 50cm x 60cm (leaves)
2 45cm x 30cm (leaf supports - replaced fancy brackets that were too expensive over here)
Timber cuts:
6 34mm x 34mm @ 50cm (cleats)
6 18mm x 70mm @ 52cm (supports)
2 18mm x 70mm @ 42cm (spacers)
I started building this pirate ship in the spring of 2020. It kept getting bigger as a friend donated old lumber from his masonry company. He was going out of business and wanted to get rid of some of what you see here.
The ship is 24ft by 10ft.
I won’t papa of the year three years straight.
Thu, 05/26/2022 - 16:41
This is so awesome, thank you so much for sharing your creation!
We followed Ana's detailed plans for the Stratton Daybed from her book and her blog. We appreciate the help!
We made this for our twin nursery, so that I could have a place to feed, sleep and read to the babies. It is much more comfortable than having to squeeze myself and two babies into a single chair.
It took us a few days because we work and have a three year old. We decided to paint the inside of the storage spaces underneath to go along with the rest of the room.
Designed to store 56 qt clear sterilite totes. Spaced 17” apart and used 5 2x4s so 23” deep. We have a lip of our foundation that sticks out so we had to adjust for the difference in leg heights.
Another bench for another wedding gift.
We've made another already to keep in our kitchen. Looks great, thanks again for the plans.
We opted not to incorporate the storage/ flip top. Just a simple sturdy, great looking bench.
Table is 4 1/2 long. Used
the farmhouse end. And used 2x12 for bottom instead of 1x12
Modified to be slightly more modern by removing had the X and having a solid bottom shelf. Also, narrowed it up to be rectangular shape to save space.
Tue, 10/09/2018 - 09:36
I love your mods! The stain color is just beautiful too.
This was my second project and is the simple outdoor sectional. Took me about 8 hours to build all the sections and another 8 hours to stain everything. We ended up buying the cushions and pillows from Garden Ridge in Texas. Total cost for the cushions was about $500. Wood and materials was about $300. I used 1 x 4 cedar to insure it was rot and insect resistant. Then I stained it with Behr Premium Outdoor Natural #500. Looks great out on our covered patio. I will be building more as we are in the process of installing a pool of which I need lots of furniture to go around the decking!
Fri, 07/22/2011 - 13:55
This is gorgeous and it goes really nicely with your brick house too! I'd love to see more pics if you have. Great job :)
Sun, 02/26/2012 - 12:41
Cushions are expensive because you want to buy a mold/mildew resistant foam on the inside. Secondly, you want the fabric to be an outdoor fabric that has resistance to fading from the sun, but again that will resist mold/mildew and withstand rain, etc...with that said it makes them expensive.
We pulled ideas from a couple of plans for this daybed. We utilized the farm house headboard for both the back and the sides. And, the daybed dimensions and framework from the Hailey Storage Daybed.
We have cabinet doors to put on the two center cubbies, but the first set warped when painted. So, the second set are currently drying. We're planning to use magnetic spring-push closures on them to eliminate the need for cabinet knobs (we're afraid they could be used as a step by little feet!).
We did not secure the slats that lay behind the cubbies and the headboard, this way we can utilize space under the bed for additional storage--there's a ton of room under there!
This was the first project that we used a Wagner HVLP paint sprayer on. I will NEVER go back to brushed and rollers. The learning curve was minimal and the time savings phenomenal!
Mon, 10/28/2013 - 11:04
We built this bed over the weekend! Just need to finish painting. I was wondering if you had trouble with the mattress fitting, because the dimensions seem to be a very tight fit. Also, did you put a sealer on the bed or just paint?
I'm so excited Ana created plans for this table! When I first came across it on Pottery Barn Kids it was love at first sight. :D I built it over the weekend for my little toddler. Unfortunately, he's too short for it, but he'll grow into soon enough. :) (I secretly wished it was an art table appropriate for my height!)
It cost me about $75 to build. I splurged and bought select pine boards for the project. The art table was also my submission for September's Fab Furniture Flippin' Contest. September's sponsor is General Finishes and the theme was geometry!
Now, I just need to build matching seats! I love the little stools Ana built; maybe I'll do something sorta like that. :)
Thank you Ana for inspiring me to build!
I built a ton of these as Christmas gifts and they were a huge hit! I used 2x3's and made them in different heights. Thanks, Ana!
I've been wanting a new desk for YEARS, as I've been using my childhood desk as a computer desk for about 12 years, but I never wanted to shell out the kind of money a desk I'd want would cost. So, this Parson Tower Desk was my very first build! First time using a table saw & I kept all of my fingers (go me). I'm very proud of how it turned out. It's not perfect, but it is exactly what I was hoping for! I love using it & can't wait to move onto my next project!
Thu, 07/28/2011 - 18:11
Screw the power station thingy to the bottom of the desk and fill in the pocket holes and youre perfect!
Im still in the process of building two supersized versions of the parsons desk
Built this for my nephew's 2nd birthday!
#formeremortals #anawhite
A bench I built for my sister as a birthday present. I used whitewood for the painted parts and some left over knotty alder for the top and cross supports. The alder was from a kitchen rehab and I have been holding on to that wood for ages. :) The hardest part was the cross supports - figuring out the angle was a bear! Thanks for the plans Ana!
It was taken from a plan that Ana had for a patio bench. I made it longer and high enough to match the seats on the couch
Combined several different plans from several different sites, but my mother in law is a master gardener who loves birds and wanted a new bench for her garden. I used 1x4's on the seat slats (instead of 2x4's- added an extra support in frame), made the seat a bit deeper, and I modified the arms to allow somewhere to rest a glass of her southern sweet tea. :) All made from box store non PT lumber and sealed for outdoors. The ideas for the "pickets" on the back and birdhouse came from "MyOutdoorPlans.com"- want to give credit where credit is due.
We LOVE Ana's plans for the outdoor sectional! We just bought a house with a first patio and we knew this is what we wanted out there! We used one corner unit and four armless units to fill our space. I'm also planning to add a couple ottomans as a coffee table. Let the cookouts begin!
I don't know if it's true everywhere, but here 2x4s are about 1/2 the price of 1x4s so we made a couple modifications to the plans so we could use the much cheaper 2x4s instead. It saved us tons of money and gave the sectional a really chunky, sturdy look - a nice bonus!
When we finished it, the blue store employees suggested we use a deck sealer to make the cheaper wood last a long time. We were able to use a waterproofing stain to color and seal the wood at the same time which made the finishing go a lot faster than other projects I've done with stain and polyurethane.
This is the first time I got to use my new Kreg Jig, which was super fun, and made the furniture nice and sturdy!
If anyone is interested in using 2x4s I have the modifications here: http://morelikehome.blogspot.com/2011/06/our-new-outdoor-sectional.html
And info about my finished project here: http://morelikehome.blogspot.com/2011/07/patio-perfection.html
Sat, 07/30/2011 - 23:20
You did a great job. I really like how it looks with the 2x4's, too.
Sat, 07/30/2011 - 23:20
You did a great job. I really like how it looks with the 2x4's, too.
Sun, 07/31/2011 - 04:33
Love the chunkier look as well. Beautiful job and thanx for posting the mods which I will be sure to use in the future when we build ours! If you don't mind me asking, where did you get the cushions and how much for each? Also, love, love, love your profile pic! Absolutely precious!
Wed, 08/03/2011 - 20:06
I'm glad you like it! Thanks for the nice comments!
The seat cushions were from walmart for $25 each (marked down from $30). We spent almost as much on those as on the furniture! Crazy! The back pillows are just regular throw pillows to save some $$$. :)
Mon, 08/03/2015 - 10:21
I used your plans and made this! Thank you so much for the adjustments on the measurements!!
Made these barn door style doors for our master bath remodel. Using some of the same techniques found here. The finish is a 5 step Minwax process: pre-soak, American oak stain, grey, whitewash and finally wax finish.
Comments
Ana White Admin
Thu, 05/12/2022 - 19:28
Oh my, gorgeous bed!
WOW, this is so pretty, way to go! Thank you so much for sharing!