Community Brag Posts

This was my first BIG project. I was inspired by a console table from a blog Take the Side Street and the Ikea Hemnes Sofa table. I didn't use any plans, so just winged the whole project. I was a bit afraid taking on this project, so I used 89 cent utility boards (roughly 1'x4') that I found at Menard's. So I wouldn't feel bad if it turned out like crap or fell apart. Little did I know how wonderful it would look. I added parson legs to the bottom that I bought from the Home Depot and finished it off with a coat of Minwax Ployshades in Mission Oak.

I'm really excited about how it turned out and have less than $20 invested in the whole project by using the utility wood. This console table holds it all.

The table measurements are 48"x32 1/2"x11 1/2"

I love this table!! Simple build using recycled wood from dumpsters. 

Best looking greenhouse and great size!

A bunkie board needs to be added to the shopping list. I used one from a bunk bed that I used to have as well as some metal slats that I used to support the bunkie board. I would imagine you could use boards as well. Also, I would add that 2" screws would be helpful. There were times when 2 1/2 were too long and 1 1/2 were not long enough. It's a very sturdy bed. Definitely recommend using lots of wood glue for reinforcements. I also added L-shaped brackets under the 2x6's to add support.

We didn't want a platform bed but liked the looks of this bed. We used a 2x10 for the vertical frame. The 'rail' around the top of that is a 1x4. We sunk the supports slightly to hide most of the box spring. I also wrapped the box spring so that it matches our bedroom and isn't so apparent. The legs we did were two 2x4s as we couldn't find a 4x4 in pine. We did two twin beds to support the twin box springs and did a 'footboard' that brings them together. They wouldn't have fit through doorways otherwise. It turned out very well. The headboard is somewhat our own creation.

Decided to use your plans and build an entertainment center for the house. I did however change a couple of things, like it is a little smaller and I used weathered wood for the sides and front, along with deciding on not using the doors. After building this project ...I Loved it !  In fact loved it so much , I built a matching end table.  Thank you so much for the plans and ideas.

DIY Home Closet Upgrade

I built this custom desk for a customer's 6 year old son. I started with the Modular Office Small Desktop. I had to make changes to the plans because I was using 3", posts, 1.5" solid wood top and the entire desk was made out reclaimed lumber. I also added a cross beam on the bottom to make it more secure. Once we settled on the basic idea my customer said if I found something unique to go ahead with it. They were thinking a cool piece of wood or something like that, however when I found an old boat instrument panel at the used furniture shop where my wife and sell furniture I had to have it. I then pulled all gauges from the panel and installed them in a wood "back splash". I rewired the gauges to work on 120V power so one switch will turn on the gauge lights and the other will make some of the gauge neddles jump.

We just built our first set of Adirondack chairs and after sharing with our friends, we have sold a few. We are now building other stuff too!

The only change I did to the original plan is place the 1x3 on the top in the back. Makes it look more stout and clean finish.

We painted it 3 times with a nice red and bought some great cushions at a good price.

This workbench was fairly easy to make and I was able to do it by myself. The hardest part was attaching the supports to hold the two sides together without an extra set of hands but I figured it out. I made another shelf to sit on the bottom so I'd have a space to put smaller stained/painted projects to dry. I love this table, it's exactly what I needed. Supplies were purchased at Home Depot for about $50.

I took one of Ana White’s Adirondack chairs, and made some changes to the back part of it and then turn it into a two seater console chair with ice chest in the center

Norman R

I like building things for others, especially when it's something that they can't find anywhere else. In this case, my friend has lived in her home for 20 years and never could find a storage piece to fit in this niche in their bedroom. When she asked if I could build something I was ready to try!

Because the dresser is 83" tall, 14 inches deep, and 33 inches wide, I didn't use one of Ana's plans. But, the Madison Dresser could be used as a jumping off point.

My friend is thrilled with this, and I hope they can use it for many years to come.

Reclaimed wood nightstand

I built these for my son's new home. The bench seats lift up for storage. I was rushed to get them done for the housewarming/adoption party. There are things I would do better if I did another set. 

Hi Ana,
thank you for all you inspiring build plans
I have build a few of your 2x4 out door furniture plan
2x4 outdoor sofa
2x4 one arm outdoor sofa
2x4 outdoor side table
2 pcs of the essential outdoor chair for deep seat cushion.

Johan Janssen from the Netherlands

This is my most ambitious build so far. I wanted to make a really nice piece of furniture and I needed a bed so this is it. I wanted drawers and I wanted to make an upholstery headboard so I this is what I came up with. The headboard was so simple and took only a day. I searched youtube and found a video walking you through the process and was surprised at how easy it was. I built the bed with oak but I would do it differently next time. As it turns out I don't like the grain of oak and its so porous that I spent A LOT of time on the finishing part. I used wood grain filler to take away the porousness and used a series of stains and glazes to get the finished look I wanted. All in all I'm happy with the result but I think I could do it better next time.