Community Brag Posts

Had a great time putting this together for my teenage daughter's room. Took me about 4 hours to cut and assemble (I only have a circular saw, would have been SO much faster with a miter saw). Then sanded and painted the next day. Under $50 for the wood. What a deal! Love this plan!

Lake house water front DIY bar. Made of treated lumber and pallet wood planks that I cut from collected pallets.

We finished the deck this summer and wanted a large table to put on it. I saw the different versions of the outdoor Ana built. This one seats eight and has a tile inlay. For now...chairs from Walmart provide seating.

Simple project to do with the kids.

Video:
https://www.youtube.com/watch?v=S4EDpDPf6DI

Instructions:
http://www.instructables.com/id/Pallet-Wood-Painting/

My husband made this for our Grandson last Christmas. He loved it!

I am in process of making these for my new twin nephews. By reducing the width of the toy box by 1/2", I was able to fit two of the open top toy boxes on one sheet of cabinet grade plywood ($30).

For Two Toy Boxes cut plywood to the following dimensions (see photo for layout):

2 - 32 x 15 1/2 pieces (bottoms)
4 - 33 1/2 x 15 1/2 (front and back)
4 - 15 1/2 x 15 1/2 (sides)

My local Home Depot does not charge for cutting the plywood and the person that was assisting me made absolutely perfect cuts and helped direct me to the cabinet grade plywood (which was located away from the plywood aisle), thus saving me an extra $15.

Boxes took approximately 2-3 hours each to build, another hour to sand and fill screw holes, and several hours to paint.

Photo is of Dexter's toy box. Dante's looks very similar. My 2 year old niece enjoyed taking a nap inside of the boxes as well.

Make sure to purchase non-toxic paint.... I believe one of my nephews may be part beaver!

I was contacted a few months back by a friend of mine to build a custom cabinet for his aquarium. I was given free reign with the design and I decided to go with a modern look to the cabinet.

I decided to go a little unconventional with the finish on this cabinet and use something I am very familiar with, an automotive finish. I chose to got this route because I knew that I wanted an ultra smooth finish. I knew that because he was using it for a large aquarium it was going to have to be built sturdily. But you can use whatever type of materials and finish to suit your project. 

I built this a couple months ago and I'm finally getting around to posting a brag post. This is the second woodworking project I've ever done and my first year gardening! I almost spent over a hundred dollars on one of these raised garden beds and then I saw Ana White's plans and I am so grateful! Hopefully my tomatoes will be ripe soon, but one thing is for sure... this raised garden bed paid for itself with the amount of veggies I'm getting from it! I have big gardening plans for next year! Sorry my second pic is sideways... can't figure it out!

This is the 2nd Rustic X Coffee table I built. This I built as a wedding gift for my Brother and His wife. Instead of the X posts on the ends I opted for a column design on the end. It was actually a little more time consuming but I think it looks great.

White cabinet made from some doors and hardware left over from my built in book case project and other wood left over from the book case and closet projects.  All I bought was the wood for the top and the legs.

Pocket Screws are my new favorite things! Total of 10 chairs made, 6 corners and 4 sides. Over 230 cuts, and 1000 pocket screws. It took me a while to finish, but I am very pleased with the result. I would not attempt this project without the Kregg Jig or similar product however. It saved me a bunch of time. The plans were detailed and easy to follow. I added a back brace to the design, and decided to make three separate units instead of a u-shaped sofa. This adds more armrests to the unit. I intend to add end tables in the corners and a table in the middle still. Instead of screwing the chairs together I used One-Wrap Velcro so the units can be reconfigured. I purchased the cushions instead of making them. Lowes had some on sale for $50. It added about $500 to the total cost, but it was worth not having to sew.

This project took 45 minutes, from measuring to filling up the drawer :)

I ripped some existing 1/4" plywood scrap down to 5" (that's how deep each divider is)

My bases are quite small: they were made from a 3/4" tall by 5/8" deep scrap piece. This made each shelf fairly shallow, but the incline is plenty so that the spices don't slide up and down.

Thanks for the inspired design! Went together simple and quick. Your site rocks.

Table was built for my daughter, now she wants me to build the End table and Sofa table. LOL

This was a fantastic project and I love the way it turned out. You can check out my blog post for more details how it all came together.

Mostly Aunt Dottie - Faux Fireplace Blog Post