Community Brag Posts

Plant, shoe and bag stand

Submitted by Anonymous (not verified) on Tue, 10/05/2021 - 02:39

This is a stand I made for my sister who wanted something at the front door to put her shoes and shopping bags

Rustic Console Table

Submitted by Anneke on Thu, 03/10/2011 - 21:51

This is a piece I made out of scraps just for fun. I'm pretty happy with how it turned out and how functional it is!

I looked on the Tryde Console Table and Simple Console Table as a reference and just figured out the dimensions from what material I had. I also added a piece of wood in the center, and winged it with the shelf on the bottom.

Estimated Cost
$5
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
2 coats of Minwax Polyshades Bombay Mahogany Satin
Recommended Skill Level
Beginner

Lack Inspired Entertainment Center

Submitted by eralben on Mon, 04/20/2015 - 07:24

The IKEA Lack Inspired Bookcase plans became my inspiration for the entire entertainment center.  I made a few changes to the bookcase plans.  I increased the height of the bookcases to 84 inches and added adjustable shelves.  I also included some major extras including a console for the TV, a bridge to connect the bookcases, and doors inspired by www.shanty-2-chic.com.

Built from Plan(s)
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Red Mahogany
Recommended Skill Level
Intermediate

DIY Kitchen Island

Submitted by CustomPulp on Wed, 08/30/2017 - 12:16

Island dimensions Bar 36" deep x 50" wide, counter top height and base has 24 inch depth. I was lucky enough to have the walnut donated for the project which I cut into 1" stips and glued together butcher block style. Also put a 1 1/4" band of walnut around countertop for appearances and to help strengthen the top. The base was made with pine and painted turqoise. The double waste basket was another touch I added. Thanks for looking.

Estimated Cost
base with lumber, door hardware, double trashcan hardware, corbels, paint $250.00. Pricing the Walnut if not donated, would have added another $300.00 to the cost of the project.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
tung oil on top. Lowes Satin finish Valspar for the base
Recommended Skill Level
Advanced

Comments

Adirondack Chairs

Submitted by Anonymous (not verified) on Tue, 10/05/2021 - 08:19

This was a fun and simple project. One of my first attempts at making outside furniture and it was nearly perfect the first time....why?... the plans were so easy to follow, the techniques used were not demanding, and the tool selection was ideal for my workshop. I put them outside and I have had good reviews, and requests, for these chairs.

Comments

Seasonal And Holiday

bench

Entryway bench, modified size to fit space and added cushion. ** Cost includes foam and fabric for cushion. Bench itself cost about $60.

Built from Plan(s)
Estimated Cost
$90.00
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
1. one coat paint with primer, Behr French Roast semi gloss
2. sanded 120 grit, then 220 grit
3. two coats paint with primer, Behr French Roast semi gloss
Recommended Skill Level
Intermediate

slightly modified x console table with added hutch

I have been dreaming about this piece of furniture for 3 yrs....I used Ana's plans for the rustic x console but took out the front middle support and made it a little deeper I also turned the 2x4 vertically and added an extra 2x4 behind it to add extra strength.....because I wanted to fit 3 baskets from Target underneath...the hutch i just winged!....Thank you so much Ana for giving me a place to start!...I am in love!......

Built from Plan(s)
Estimated Cost
$230
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Maison Banche in Wrought Iron and vinegar stain (2cups vinegar 1/2 cup hydrogen peroxide and 2 things of steel wool)
Recommended Skill Level
Intermediate

Antique workbench console bar

Submitted by aem4v2000 on Fri, 04/24/2015 - 18:14

This project was much easier than I originally anticipated. Even cutting the legs at angles and sanding them down to appear curved was easier than I expected.  I also used early american stain by Minwax. I used only one coat though and in hindsight might have done two to make it a bit darker. I used Minwax clear paste wax (two coats) to achieve a low sheen and protective layer. I was able to find a toilet paper holder similar to the one Ana used at one of my local big box stores. I wasn't able to find anything else I liked better. 

 

 

Built from Plan(s)
Estimated Cost
less than $100 including the stain and towel bar holder
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax Early American stain (one coat) and Minwax clear paste wax (two coats)
Recommended Skill Level
Beginner

Triple Pedestal Table & Bench

Submitted by Lishpav on Wed, 09/06/2017 - 19:56

It's turned out way more beautiful then I had thought. It was all the mini details that took the longest but made the look worth it 

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Gel gray stain for the top gel prairie wheat for the legs
Recommended Skill Level
Intermediate

Modified Ann White Table

Submitted by Anonymous (not verified) on Tue, 10/05/2021 - 17:07

This is a modified version of your Farmhouse Coffee Table.

Comments

My First Project

This was my first project I did close to a year ago. I was so excited about the site I decided to go big right away and do a table and benches for our first house we hadn't moved into yet. I had help and it was quite the learning experience. I think I would start with something smaller first but in the end we got a wonderful table in our dining area that has had plenty of use!

Built from Plan(s)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax ebony stain and satin poly.
Recommended Skill Level
Starter Project

Wine oak barrel Adirondack chair

Submitted by Medickep on Thu, 05/30/2013 - 12:11

I got some oak barrels from a local vineyard and decided to try making some adirondack chairs. It was harder than I thought it would be, but well worth it!! The stain was a little darker than I thought it be, but it's rubbing off on me!

predrill, predrill, predrill, and learned a valuable lesson in predrilling, as solid wood under strain cracks easy when using 2 1/2" deck screws!

I need to whip out the nice camera and stop using my cell phone for finished products!

Estimated Cost
Around 100.00 dollars per chair (depends on cost of barrel!)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
I used Cabot's Australian timber oil. Not the cheapest product out there, but they actually recommend one coat only and no sanding necessary for future coats. Once it stops beading water, just clean the chair and than reapply! It penetrates deep and forms a wax protective layer that repels water! This is why I chose not to varnish the item!!
Recommended Skill Level
Intermediate

Comments

spiceylg

Fri, 05/31/2013 - 05:16

I never heard of using wine barrels in this way! I love it. It came out fabulous!

Medickep

Fri, 05/31/2013 - 05:34

Thanks you. People make a lot of stuff out of wine barrels. Chairs, stools, Tables, candle holders, and even serving platters!

Joni

Fri, 05/31/2013 - 06:57

This is awesome! Very cool design. It looks very comfortable! Thanks for the tip on the Australian timber oil; I never knew what would be the best finish for an outdoor piece.

Joni

Fri, 05/31/2013 - 07:03

This is awesome! Very cool design. It looks very comfortable! Thanks for the tip on the Australian timber oil; I never knew what would be the best finish for an outdoor piece.

Medickep

Sat, 06/01/2013 - 11:38

It is very comfortable, especially with a glass of wine. I chose the finisher I did because I live in Oregon with a lot of rain!!

Why does everyone's post, including my own show up as duplicate?

Medickep

Sat, 06/01/2013 - 11:38

It is very comfortable, especially with a glass of wine. I chose the finisher I did because I live in Oregon with a lot of rain!!

Why does everyone's post, including my own show up as duplicate?

acd4476

Sun, 07/21/2013 - 17:05

Awesome chairs! Beginning to think I need to make some as well. Did you have plans for this project or follow a generic adirondack chair plan?

Farmhouse Bed

This is my favorite build so far! I love the look of this bed! 

One thing I wish I had known was how long it was going to be. The bed is a good foot and a half longer than my mattress, which is a standard queen. I would recommend measuring and cutting your side rails according to your mattress - I think I am going to go back and shorten mine. 

Also - I used my bed rails, instead of the slats this called for. I also used bed rail hooks (I ordered them from Amazon for $20) so that I can take this bed apart. 

Built from Plan(s)
Estimated Time Investment
Day Project (6-9 Hours)
Recommended Skill Level
Intermediate

Comments

Customized Corner Desk

Submitted by DTeague on Mon, 03/14/2011 - 21:21

This was my first build I have wanted to get this particular desk from Pottery Barn but don't have the space for it.  I used the corner desk plans but on one side I used the plans for the legs used on the smaller desk. Since it wasn't too big I made the desktop one piece.  All in all it was pretty straightforward.  The only problem I had was when I put the legs on the wrong side, I didn't realize until after I had used wood filler and painted. 

Estimated Cost
$175.00
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
For the desktop I used Red Mahogony Minwax Stain and Minwas Wipe-on poly. For the base, used a Benjamin Moore paint for Metal and wood in black.
Recommended Skill Level
Beginner

outdoor sofa from reclaimed wood

Using Ana's plan as a guide, I built two of these sofas to fit an outdoor cushion I already had. I used wood from our old deck -- a great way to re-use and save money, too!

Estimated Cost
$110/sofa (lumber was free)
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
None, although eventually I will probably seal it with outdoor PolyWhey by Vermont Natural Coatings.
Recommended Skill Level
Intermediate

Conner Side Tables

Built a set of Conner Side tables for my Daughter and Son-in-law that live in Austin Texas. 

Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Polyshield Ebony
Recommended Skill Level
Beginner

Comments

Toddler bed

Submitted by Bradnag on Wed, 09/13/2017 - 05:13

I made a loft bed for my 4-year-old son using Ana's Chelsea Loft plans. When I finished, I was able to build this toddler bed for my 1-year-old using almost entirely scraps left over from the loft (save for the 1x6 runners). I skipped the curved headboard design and went with a solid piece of 1x12. I was going to round the top edges or cut a more rounded design, but my wife said she liked the squared off look better (she has lots of ideas for painting various designs on it, apparently). Since we were going to use paint and not stain, I ripped some leftover MDF board for the 1x6 footers. The whole project took a single afternoon, including cutting, assembly, woodfill and sanding. The end result is pretty sturdy. My wife laid on it with both our small children and the slats hardly bowed at all.

Built from Plan(s)
Estimated Cost
$5
Estimated Time Investment
Afternoon Project (3-6 Hours)
Recommended Skill Level
Beginner

Loft Bed

Submitted by Anonymous (not verified) on Thu, 10/07/2021 - 16:28

My 8 year old really wanted a loft bed. We were homeschooling and he was struggling with fractions so I decided to use carpentry to teach him fractions. He was hands on in every aspect of this project and did 80% of the work. I’m very proud of him!

Comments