Community Brag Posts

Built this for my two boys, ages 3 and 1.5. They are in heaven! I found the plans extremely helpful and allowed for simple modifications along the way (ie 7’ ceilings). 

cube bookshelves modified to have one open shelf and 3 cube slots

Our guest bedroom has been utterly neglected and stark. When I found a pair of lamps at Goodwill recently, I knew it was time to make bedside tables.

These were created on the fly, without even a sketch or a trip to the lumber yard, though I had to select a plan title for this post.

I took a plywood scrap, cut it in half, framed it with 1x2 furring strips, added 2x2 legs, and then used more furring strips to stabilize the legs.

They were assembled quickly, and then I faced choices about how to finish them. I ended up using Minwax Provincial for the tops, then taping them off with trash bags and spray painting the rest.

They're plain, but versatile enough for whatever I end up doing to decorate the guest room in the future. I plan to stick baskets underneath them, when I find a good deal.

Next up will be a headboard for the bed.

This took about a week to complete.  I modify the original plan to include "built in" dressers and a night stand type of dresser.  The night stand has shelves built on the side.     Two beds were built of different configurations.  

My dad and I built this toybox for my son on a weekend afternoon.  We were able to use some tongue and groove boards that my dad had pulled off a job site.  We glued them together to get the width we needed then cut them to size according to the directions.  Its not perfect, and I think I might paint it this spring, but my dad and I made it for my son and I think that is pretty awesome! 

Very easy to make, and not too expensive. I'm not that great with a lathe. I tried it a couple times but not too good. So I buy my table legs online through osborne wood company. These legs however, came from an old table that I got for free from an antique store. The rest of the table got cut up and used for 2 night stands, and this is what I used the legs for. I used pocket holes to attach everything. Support the middle with cross supports and there you have it. The benches are just 1x12x8's cut into shape and supported by 2 1x4's on either side.

I had fun with this one. I was in a race to complete 4 major things before entertaining a group of 30 people in our home. My wife was searching Craigslist for existing pieces. I love to build things so I had to intervene. This pine desk/table was preceded by craftsman wainscoting, the hutch and buffet on this site, and a large framed mirror.

I went by the plan pretty much exactly. I made it 6 feet long. I used middle grade pine from Menard's, glue, brad nails, and screws. My finish process was min-wax wood conditioner, min-wax special walnut stain, and a per-catalyzed lacquer satin clear coat.

Total buy, build, sand, finish was around 8 hours.

I would love to build for you. To your exact specifications. Message me.

Built this from Ana's plans over a weekend and spent a few nights painting/staining/finishing. We decided to use a true quarter sawn red oak for the top. This is not a cheap wood (~$180) for the top alone, but I wanted it to be solid and thick. It is extremely hard so you will not want to use this if you don't have the necessary tools, like a table saw. It is usually purchased rough cut, which means the width can range in size by inches. You will need the table saw with a sharp blade in order to cut it down to matching widths. For the stain we used a General Finishers gel stain in Java from Woodcraft. That was followed with a General Finishers Gel topcoat. This is an excellent topcoat as we have 0 scratches in almost 6 months of regular use. My wife painted the base in a Cream Puff color from Behr I believe with a dark stain glaze, followed by a wax coat. This is a solid table that cost a fraction of what this would be in the stores. Most of our friends think we bought it! Thanks Ana! 

Thank you so much for the plans! My wife is extremely happy with the results and so am I. I am in the process of adapting these plans to make a matching end table. Once again, thank you!

I loved these little ledges, especially since I had the perfect scraps for them. I needed a little extra storage in our story-time corner, and these were perfect. Took me one nap time to get them cut, assembled and painted! SWEET!!!!

This wasn't my first build job, but it was the first one where I needed an extra pair of hands. My daughter loves it and so does everyone I know! Thank you for the plans!

My take on Ana's table that I made with my son over Summer Break.

Followed Ana’s plans except added custom bottom rail for door stability and handles to guide the doors. Top rail was made rather than purchased.

When we moved into our home we had minimal furniture pieces. On a tight budget and not wanting to buy something that was made of veneer, I stumbled upon the attractive and functional plans for the cube shelves. I love that I can "add on" to the set with additional pieces if I want to in the future. But for now, one set of cube shelving is just right for us.

This was the first project that I used the table saw by myself, and while it went just fine I do think it would have been helpful to have another set of hands around. Piecing together the first two joints was a bit challenging with only one set of hands holding the wood and putting in nails. But once I got a few done, the piece really came together quickly. It literally took me just a few hours to cut the pieces and put it together. It's the sanding painting and priming that can take some time and patience!

This project was a whole lot easier than it looked I think that it took me three days from wood in the back of my truck to the finished project. I think that I spent about $200 on this whole bed and headboard. It is sturdy and I really love it.

I've built a few bookshelves and cubbies before, but nothing on this scale.  I built this in my basement this past December as a Christmas present for my three-year-old son.  The plans were easy to follow.  I believe I spent about $150 on lumber.  The bed is very sturdy.  My kids love it!  Now the the other kids want their own special daddy-made bed :)

Built from full size bed plans from Jen Woodhouse. Very happy how this turned out.