Faux Fireplace
![](/sites/default/files/Build%20Your%20Own%20Fireplace%20Surround-11.jpg)
I made this surround to give me a place to hang my stockings for Christmas and give me a mantel to decorate. It also moves easily!
I made this surround to give me a place to hang my stockings for Christmas and give me a mantel to decorate. It also moves easily!
We wanted some tall planters and found some tall teak planters that we love, but one problem $820 on the Casual Country website. The ones online were angled but I couldn't get the angle right so I made mine straight.
The tallest one is 42" x 23" then 29" x 21" and the small one is 20" x 18".
They will look much better when I get something planted in them this spring.
Built the frame with 2"x2" cedar boards and used 4"x1" cedar boards for the planks.
After clearing some doesn't-belong-here furniture out of my living room, my coffee table became the home to our stereo receiver and HTPC. This project was about getting my coffee table back, in a quick, inexpensive way. The photos *still* don't do justice, but since I've added the equipment, I am SO not hauling this back outside for glamour shots.
Size: Adjusted to fit under a wall-mounted flat TV:17.5"D x 21"H x 42"W. The adjustment was simple: use 5 2x4s instead of 4.
The photos also make the stain appear darker than it is -- it's truly a rich teal. I love the color so much, I'm going to strip my built-like-a-tank, 65-year-old wooden front door and stain it, too.
This is my first "real" project. I've built things before. Badly. Now, I have a Kreg, and I'm learning to be a little more patient with clamping and squaring for better results. :)
It appears that my next project will be the taming of the cable spaghetti.
This was such a fun project. Had to figure out how to build the sliding door HW. I didn't want the doors flying off when sliding so I did secure in a way that didn't limit the aesthetics or function. I did add a back to the cabinet since the picture was taken. Strips of plywood to give it that barn flavor. The most time consuming part was painting, staining, protecting and waiting for it to dry.
I was looking for my next project for woodshop my junior year of high school. I happened to run into this website while looking for plans and found Ana's farmhouse queen bed and was inspired to make something similar. Now that I have accomplished this task, I want to share it with the community that inspired the build. Let me know what you think! Thanks.
This is a simplified version of the Unabox from Make Magazine.
Build Instructions:
http://www.instructables.com/id/Puzzle-Box-Unabox/
Video:
http://youtu.be/VTaoUHsGau8
If you like this, please see my other puzzle box.
http://www.instructables.com/id/Puzzle-Box-4/
Great snowflake template from Ana White!
My fiance and I built this media console from Ana's plans to replace the UGLY black plastic/glass tv stand we had previously. It was pretty easy to do. The only thing I recommend is waiting to cut the doors after the box is put together. Our doors did not fit exactly and we had to cut them again to fit. I'm sure that our measurements were off somewhere along the way. We love the way this piece of furniture looks in our family room now, for about $150!!!
Fri, 11/09/2012 - 19:39
Awesome! I've been eyeing this plan for a while but couldn't decide if I wanted to paint or stain it. This is great, thanks for sharing!
The table and bench project were awesome. I got a lot of inspiration from these, and have built 4 table so far. After posting the first one on Facebook, everyone wanted one. The one thing I would recommend is to really pay close attention to the lumber you're buying, make sure it straight and the edges are not chipped, to ensure all yourights seams match up, and your project ends up square. A tip to alleviate all this, is to buy everything wider than you need, and rip it straight through your table saw. What I mean is, if the table top calls for 2x10's, then buy 2x12's instead, and rip them down to 10 inches, so you're seams match up perfectly. It may cost a tad bit more, but you will definitely be happier with the end result.
I combined the workbench console and tryde console plans to make this perfect for our upstairs hall.
This was made from scrap wood, a cheap $5.00 mirror and some hooks. This hangs near my front door and I hang scarves and bags on it. Always good to have a mirror to double check yourself before you leave the house. It was based on Ana White's Craftsman Frame.
Capped railing and head/foot board for a different look. Did not like the look of the carriage bolts so sunk those in and used buttons to cover. Modified slope and added hooks to ladder so we could remove to vacuum etc. Would of added one more step if I were to do it again. My guys are little so added railings to back side top and bottom and extended railings.
It was a straight forward project and the plans were excellent and easy to follow. We did purchase the Kreg Jig and that takes a little practice to get it right but it does make an extremely strong joint. We applied three coats of paint and one coat of stain on the top. This is for our German Shepherd and he loves it. It took us three or four days just because we worked on it a little bit each evening.
Had to trim a little off the barn door track so they would fit, but overall, great project!
Fri, 12/30/2016 - 20:44
I haven't got the doors on my console yet as I can't find the right hardware for the right price!
Looks great, love the shortened version!
Thank you for helping our family stay organized and keeping our entryway clean.
Réalisation d un meuble pour poser la plancha
I used cedar, stainless steel rails and finished with marine spar varnish. Gave to my son for Christmas to hold his smoker/barbeque! Thanks for the super project idea!
The directions on this aren't very clear and there's a few that I think are off all together. It came together fine with some adjustments and the kid like it so alls well that ends well, I guess.
Comments
FurnitureDreamer
Sun, 12/04/2016 - 18:10
Nice!
Looks great. Love the visual texture.