Community Brag Posts

Scrap wood comes in handy when you need to build something quick. Our other end tables are in the garage because our little one likes to tip them over. So this was a quick fix, but we might use it as a writing/ coloring desk later.

This is the sequel to my first kitchen cabinet build, the awesome base unit to the right of the stove. It's another custom design to fit the space (and replace some horribly inefficient metal cabinets that, while cute, really looked like they belonged in a different kitchen). And my first time working with maple and edge banding! Thank you, thank you, no applause please. I'm calling this project "intermediate" skill only because I chose to router the doors and install cup hinges. Otherwise, they're just big boxes on the wall, for real.

The carcasses, shelves, and door panels are all Purebond plywood. The face and door frames are 1x2 and 1x3 maple. The french cleat used to hang the two pieces is also plywood (more on my blog about that). Unfortunately, I don't know enough about wiring to add/move that outlet so that the microwave cord could be hidden...but at least the microwave itself is off the counter! It doesn't have to be perfect to be beautiful.

The wineglass storage is a sort-of take-off on a few other plans on here and some pieces I saw down in Amish country. It's a little rough-looking outside of the cabinet into which it is installed because I didn't design that element very elegantly. Plus I kept changing things on myself mid-stream.

The concealed cup hinges...were totally intimidating. And at first I bought into all the hype about "you HAVE to use a drill press or you'll RUIN your doors", but in the end I just eyeballed it with a plain old forstner bit, and all 6 doors turned out fine! Plus, I got to use Blumotion hinges...you physically cannot slam these doors!!

I'm super proud of this project, and my mother-in-law (in whose kitchen they reside) is thrilled. Btw, the crown moulding is not yet installed, which is why the trim pieces up top look so funny.

I built this bed step by step from the Mom's fancy farmhouse bed - queen sized. I have no experience of building things before this, but bought a miter saw and nail gun. Banged it out in a weekend. More time was spent painting than assembly. I reused the slats from my old IKEA bed. In hindsight, I wish I had a way to even the boards better before assembly, like a planer.

A Christmas gift for my G- kid!!!!

Finally got a chance to try my hand at whitewashing and I just love the outcome!

Built entirely from 2x4 - 22 studs altogether - the tricky part was cutting a rebate into the trims so that they look like 1x4 from the front. adjusted plans to suit australian king size mattress & made everything lower & used plenty of kreg screws to put everything together (inspiration from plans in the book). here studs are sold 'rough headed' - so there was an insane amount of sanding - not helped by the fact that I was a novice to the belt sander. Took the best part of 4 weekends to get it all together

This planter box turned-out looking great! I put it together the first go-round using all kreg-jig screws, but couldn't get the pieces to sit flush with each other, so I took everything apart...and used star-drive screws instead of nails). I have decided that I hate nails.

I used the kreg jig to attach the 4 posts, but then used brackets to attach the rest of the panels -- this worked well! Once I put the slats in the bottom, it was very sturdy.

TIPS: don't be afraid to alter the plan. If you like working with brackets, use them!

I have to say, this turned out phenomenally for me. I set up my whole garage with new shelving, planned it all out so I have very little plywood waste by altering the widths a little. This is by far the best carpentry project I’ve ever completed. Thank you for the great video, and I love the Kreg jig. That made a big different too. Over 2 years since I installed them, and they are all still solid, level, and plumb.

We built this bed in the Cabin style, but we wanted to be able to stack it Simple style. It turned out beautifully!!

My husband and I loved this idea but we don't have much wood working experience. My brother and sister in law were visiting and we decided to make this project together. Our son loves Turtles and we already have a bunch of Teenage Mutant Ninja Turtle "stuff" so we thought that would be a great theme. The guys cut all the wood and assembled and the girls did the painting. Then my brother in law who is super talented added in the details.

I decided to build the Farmhouse King Bed. I liked the look of the frame and am happy with the outcome. This was my very first piece of furniture I've ever built. Already started on my Farmhouse Bedside Tables!!! 

For the paint and stain:
The Wife and I really wanted a rich red color, but didn't want it to be so bright that it stood out funny against the rest of our furniture and settings in the living room. So, I went and picked up some Espresso Water Based Stain from Woodcraft, from the brand "General Finishes" for the base coat and the for the 1/4 board back. As you can see in several of the photos, I didn't cover the entire thing and in some areas I purposefully was SLOPPY (Yes my Wife's name is Amy). Afterwards... for the red coat with the finish.... my wife loves using this Annie Sloan paint that she uses to refinish other projects... Basically follow any tutorials on youtube or on her webage. It can be a hard to find paint, but I think a milk paint and clear wax and a brown wax will do the trick also.

For the build:
I took the planked wood sideboard plans and pretty much threw out the middle doors and drawers. I have a pretty serious entertainment center in our living room and the center channel speaker is by no means small.. It's so large that at the box stores, I could never find a media console that it would fit. I chose 3 shelves because I wanted it to look fairly even. For reference... the center shelving area is approximately 25 inches wide.
Nothing really special here, if you need some hints or tricks that I used message me and I'll help the best I can. I'm by no means an expert at this, Just take your time and anything you do will come out looking great. Plus. YOU MADE IT!

My son saw a similar bed online that he wanted, but unfortunately we couldn't purchase it due to the 9' ceiling requirement. So, while searching for another store that might carry an 8' ceiling version, I found the instructions to build your own clubhouse bed on Ana's site. I have no idea what possessed me into thinking that I could build this myself, as I have never built anything before, but....I went for it. I bought all the tools and lumber, and took my time with building it. It was a great learning experience! As a divorced mother of two, I feel proud that I was able to build this completely on my own. My kids now look at me like I am some superhero that can build anything. (They are busy compiling a list of other things they would like me to build!) Thanks Ana for the instructions and the inspiration! 

Christmas presents for adult children. All oak.

From the Modern Square Farmhouse table.

My niece's husband is career military and they move a lot. She saw the farmhouse table on Ana's site and asked if I would build her one that could be disassembled for moving and have extensions for large group gatherings. Challenge accepted!

In order to take the table apart, I used 2 - 6 inch long lag screws at the top of each leg that screwed into the 2x4 supports for the table top. Due to the weight of the table, it is advised to turn the table upside-down when removing the screws or assembling the table. Next, I used 3 inch lag screws to secure the beam under the table. Again, the lag screws are easily removed for moving.

For the leaf inserts, I utilized a dowel jig so the leaf extensions could be easily inserted and removed on the sliders that support the breadboard ends. (It is necessary to drill the holes out a little larger that accept the leaf dowels. If this is not done the leafs will fit too tight and it is difficult, if not darn impossible, to remove them.) This was advantageous for two reasons ... (1.) The leafs are easily installed and removed; and (2.) No need for leaf extensions that have their own 2 x 4 sliders. This reduces storage space for the extensions and eliminates the slider insert hole cutouts on each end of the table because the slider is never removed.

The table, when disassembled, is in (8) sections:

(2) table leg sections
(1) table top
(1) Main beam from under the table
(2) Leaf extensions
(2) Breadboard ends attached to 2x4 sliders

My niece is simply thrilled with the table.