Community Brag Posts

This was a lot of work and a bit of frustration but now that it's done it was well worth it!!

We followed Ana's plans but went 1 ft taller on the pony walls to increase the height. We are so impressed with how it turned out. I'm excited to grow plants in Northwestern Ontario.

This is my first DIY furniture project inspired by Martha Inspired Craft Space Table posted by Ry. I built it for my combination of console table and craft space. I will be using the shelves in the middle to put my wicker baskets(that is why it was not nicely stained:-)) for quicker access of some of my craft stuff. Thanks for the plan!

I had always wanted a kitchen island and saw this project. Seeing that the plans were well written I decided to tackle it. In addition I made a few small modifications to enhance the style of the island. These included using 4x4's on the corners and a IKEA butcher block top. The top allows for a larger surface area to work with and more space to sit under. The stools in the picture are from World Market and they were the perfect pair for the island. The island is great for family gatherings or just sitting with your morning coffee. I had family over for Thanksgiving and received lots of compliments. Thank you Ana!

I loved the simple look and have admired similar loungers at Pottery Barn.  Even if I had the money I feel it's a waste to pay for what they charge.  I knew there were plans somewhere to make something similar for a fraction of the cost.  So happy I found this site!

I have many tools at home so I needed to purchase the lumber, hardware (screws, hinges, etc.), stain, and sealer.  I would say it was about roughly $100/chair (rounding up) - not including the cushions.  Those I found at Lowe's for about $60/each.  

I haven't made anything like this before so I made the first one and took my time.  I really enjoyed the process and thought the instructions were simple to follow.  I have some skills and basic knowledge so I didn't feel like this was too difficult.  I love the way they turned out!  I did the 2nd chair the following Saturday.  It took most of the day including the finishing.  I only took a few hours to put one together.  If I had help, would have been less, no doubt.  I plan to make a double lounger to match these soon. 

I will agree with some of the other posts that the legs seem a little "flimsy."  I went ahead with the orginal plan and they've held up with no problem for a year in the Texas summer heat with lots of activity and use - including our dogs!  So, I guess it's just fine.  I may use something sturdier for the double lounger since it would hold more weight.

I highly recommend these loungers to cut costs!  Also, the plan is not too difficult for anyone with little experience.

Hi I was tired to see the magpies and flickers destroying the nest and kill the sparrows After days of research i came up with this model that i tested last summer and believe me, it was successfully accepted by sparrows This year i made bunch of them, some different models till i get to the yellow one style that is perfect I really loved it and i'm here sharing it with you guys I will share plan for this bird house in my Instagram next week (June 12)

I designed this off of the laundry basket holder.

This is a mix the "Side-Street bunkbed" plan and the "How to Build a Loft Bed." I used "Spax" 3 inch wood screws to attach the side rails instead of bolts used in Side Street plan.  I used KregJig pocket holes for everything else. 

I used the plans for the fire station loft bed (http://ana-white.com/2011/11/fire-station-loft-bed), but added the stairs from the camp loft bed (http://ana-white.com/2012/07/plans/camp-loft-bed-stair-junior-height) since my son is young. I was afraid of him climbing down the ladder at night if he wakes up. The stairs are not attached and can be removed when he is older. They were designed so he can climb through the space where the lower rungs of the ladder were and use underneath the stairs as a fort, etc. The project took quite a bit of time and cost about $500 (not including the Kreg Jig or mattress).

First table built by us. I think it turned out pretty good! Custom built to avoid baseboard heater. 

Lots of fun building all of this - very easy to do as well. Built a coffee table, 2 end tables, 2 console tables, and the book case. I changed a couple things up like doing 1x4 instead of 2x6 for the tops, and used the advice on aging/oxidizing the boards as well.

This is my FIRST ana-white project and the first furniture I have ever built.

I made a few modifications to the original plan. Rather than using plexi-glass for the doors, I chose to use plywood panels to hide the electronics (Then I will use a rf repeater so the remotes still work). The doors are assembled using half-lap joints cut using a tenoning jig and a slot bit using a router with 1/4" plywood set into the slot during assembly.

I also chose to put a 1/8" roundover to most of the edges with the router to add a little interest and mounted the top doors from the top so they "flip up" rather than down.

Finishing was my biggest challenge but after fixing many mistakes, I finally am satisfied with the result. I used 4 coats of oil-varnish blend on top of a water borne stain.

I really enjoyed this project and it definitely gave me the addiction. I'm pleased with the final product and it's a huge step up from the IKEA thing we had before. I just bought a new table saw and can't wait to start my next one.

Thanks for looking!

This was a particularly fun build for me since it was for my little guys' room! Hope Santa fills it with tech goodies on Christmas!! Please check out the details on my website! Happy Holidays!!! :D

After contacting two cabinetry carpenters to do this project for me,  I came upon Ana's plan for the Momplex. I made some adjustments for my home abd surprised myself. 

My motto "what's the worse that can happen? I have to call someone! "