Entryway shelf & bench
It was so much fun building this bench & shelf for my entry. I now have a terrific place to stash things and hang my coat and purse! I am planning to make boxes to fit some of the spaces in the bench.
It was so much fun building this bench & shelf for my entry. I now have a terrific place to stash things and hang my coat and purse! I am planning to make boxes to fit some of the spaces in the bench.
I used 1x6’s as opposed to 2x6’s for the base as well as the 19” pieces thus I cut the length of the legs to 27 3/8 the difference of 1 ½ inch from the plan. In addition, the plans did not specify as to the placement of the legs on to the 19” pieces and thus I attached the 17 ½ bottom shelf braces and then attached the legs to the top. I finished the project with MinWax Classic Gray stain which gave it an antique finish followed by a finishing wax.
I built this for my daughter Keila. She loves it and her friends do too! Took me one day. I painted the entire bed in deck paint. It completely eliminated all
Splinters!!! I added the slide, a USB plug, cup holder, and fan.
My first project, something I took on with my kids. Lots of fun, errors, and lessons learned. Used an hvlp for stain and poly, so much faster and easier than brush or rag staining.
Thanks for the inspiration and instructions.
Handmade by novice
My husband bought me a Kreg jig for Christmas since I've been wanted to make some Ana White projects. Love how the first one turned out. Team project with hubby for our entry way.
I didn't realize how expensive pool loungers were. Thank goodness for Ana White! I modified the size to 73 inches long and 22 inches wide so they would be a good fit for the cushions I got from lowes. Something to take into account is that the 2x4 won't be able to rest on the back legs when you use the 2x6 on the sides. There is no way to get it in. I didn't realize until I had built them but I just cut two pieces of 2x4 at 3 1/2 inches and placed it on top so I can rest the back all the way down. Love the end result!
I've done a dozen or more of these letters now. Each letter has to be cut differently, but they are all made from 2x4s and pocket holed together using my Kreg Jig. I have also made some letters with curves (such as R, B, J, etc). I cut the curve out of a 2x10, left over stair stringer and then join it with some 2x4 for the rest of the piece. To make the base plates, I cut small blocks of 1x3 and rounded the edges with a palm sander. I used glue and finish nails to attach them. I have more projects like this on my blog http://pneumaticaddict.blogspot.com .
For a few years, we used a normal wooden wall hanger (a normal wood wall hanger means a piece of pinewood plank screwed on the wall, which had 7 double hooks on it), we decided to find some new ideas. We found a nice idea, a pine beam that looks like it’s part of the structure, passing through the wall, on which a lot of wooden hooks are fitted.
This was my first project.
Wed, 01/16/2013 - 17:47
Great work and result for your first project. Something as simple as this bench/table still results in a thing of beauty, especially if it is square and level when you are all done.
Modified plans for the modern patchwork dresser so part of the top opens for access to pet food storage bins.
Planked wood sideboard without drawers, used as a media console table.
My daughter is into everything Minnie Mouse right now so I figured, why not!
Tue, 04/28/2015 - 12:04
Is there any way to get the plans for the minnie mouse chair? Would love to make this. I can open the plans for the basic adirondack chair, but not the minnie mouse one.
Thanks!
Sun, 07/24/2016 - 18:30
I am not able to download the minnie mouse chair
plans, can someone please assist?
Built the top out of reclaimed wood reclaimed from buildings in/around Chicago. Stained top and insides shelves with minwax hickory gel stain. Outside painted in chalky finish Dutch boy antiquainted lace. Custom made rail and hangers for sliding apparatus.
We followed the instructions for the most part. However, we did add 6 inches in height and the center of the headboard was larger. We completed a tufted upholstered insert that we added. It only took us about three days and we are very please with the results.
Only recommendation: After you sand, fill holes and other dents/dings in the wood use wood putty. Sand again. Prime. After priming, more "flaws" can appear. Take the time do fill again with wood putty and a light sanding. It is hard to do when all you want to do is paint...but the time will be worth it in the long run.
This was my very first woodworking project. It came out great! My wife did the distressed corners. Amazing how easy it was. Pardon the puppy posing for his dad.
I really loved this plan of Ana's so I decided to build it for myself. I love the stain color on the one Mid Atlantic Rustic built and they were so kind to tell me the color and it turned out perfect! I will say if I ever built another I will make some adjustments with the doors and drawers and have them sitting on the outside of the facing. Those things were the devil for me!! I have only been building on my own for 6 months, so it was tricky for me. THE PIECE IS HUGE!!! I also added 2 2x4 supports under the bottom,
Happy Building
I paid $5.99 for this entire build... that was the lighted garland! All other materials I had leftover from previous projects. We have extended family for Christmas so 13 people/dogs are here each year. I made 14 'hooks' just in case any family are added, and these were old brushed nickel drawer pulls that I replaced on my kitchen cabinets. I couldn't be happier with the outcome and now I can simply store in the attic each year and not have to use command hangers all of over my walls and mantle. This turned out beautifully!
Quick note: I had to drill into the back for the drawer pulls (hooks) screws because the long screws I had in previous installs wouldn't go all the way through. I predrilled the smaller hole for the screws all the way through then countersank the hole with a bit the size of the screwhead so it would disappear into the 2x4 and come out far enough for the knob to attach.
Fri, 12/04/2020 - 10:11
Perfect way to use up what you had on hand and it looks beautiful! That's A LOT of stockings!:)
While browsing Pinterest I stumbled across this design and liked it. One of the links led me here, so I will contribute the photo to this site.
I used pine ands birch plywood instead of mdf to construct this. This was a pretty simple design, but I really like the way it turned out. I was looking for something that I can store some sad keys in to hide some kids toys that are in the living room from time to time and this will aid imaging it an easy cleanup at the end of the night.
This will take some time to build because see of multiple pieces, but is not a hard build. It is important to select better quality pine for the outside legs and edging so that it fits together easier (and looks nicer too)
My first woodworking project.
The top is poplar and I had the local lumbar yard cut them to uniform thickness, planed and jointed. That made a nice close connection when it came time to glue and screw.
Also since it was not dimensional lumbar the boards are cut to actual size so mine is a few inches wider than the original plans.
I needed to modify the plans in order to make the top removable so I fashioned 4 blocks and attached them to the insides of the apron, and used a spade bit to drill out a 7/8" hole. Then attached 3/8" hanger bolts to the top and attached to the base with wingnuts and washers. Worked like a charm!
I wanted to keep all the interesting variance in the top so it's just natural with Minwax Satin Poly.