Community Brag Posts

My family needed a new outdoor dining table so my husband and I made this DIY Restoration Hardware Inspired Farmhouse table with Salvage Grey Wash Finish! I combined two popular RH table styles, the rectangular X-base Table and the Brickmaker’s Table, to come up with this distinctive innovative design: an X-base bottom with an industrial bolted plank table top! This will blow your mind....this table cost us only $157.00 to make, just a small fraction of the the RH $4690.00 price tag for their tables! We started with Ana White's Farmhouse Table plans, added inset lag bolts to the planked top and then gave our table a customized salvage grey wash finish to add a touch of gorgeous grey to a dark walnut base layer. We've had many fun dinners on our large farmhouse table with family and friends! See my blog post for all of the steps and materials!

My daughter asked of I could make cubbies for three grandchildren, and the single unit on this site seemed perfect. After I made the first two we could see that there was not a good way to fit three into the designated space, so I decided to make a corner unit and bolt them together. They love it!

Fun project. I built for my newest grandson Rowan. I used Rockler hinges which keep the top open at any angle and got the cushion custom built on Amazon for $30.00. Nice accent to the nursery. Raised initial and teddy bear also from Amazon

Another huge THANK YOU to Ana for her amazingly timely posts! My daughters attend a pre-school that hosts an auction fund raiser every year. Last year I made Ana’s kids storage bench and filled it with fun craft items. This year I saw Ana’s jewelry wall cabinet and knew it had to be done! We have some amazing local artists so I purchased a beautiful pair of glass drop earrings to hang on the front of the cabinet. I think it turned out great (if I do say so myself!) Thanks again Ana! And by the way, distressing wood is an awesome project for little helping hands!!

I stained the top with american walnut and used chalk paint on the bottoms.

Built from discount 70% off lumber from Home Depot. I planed and cut down to size with a Ridged planer and table saw, then screwed together with kreg pocket screws. Since I will be kneading bread on it, I used a natural coffee stain and then butcher block finish..

I changed the height of this king size bed and upgraded the boards underneath to 2X3 since I'm a big ole boy and I wanted this to last for years. - Don White

After seeing Ana's plans and how Jen Woodhouse at "House of Wood" finished it, I wanted one too! Ana's plan are very thorough and Jen's blog showed a very detailed version of how she completed it. I made a few changes, such as the pull down drawer front to conceal the DVR player and I inset the top rather than have an overhang.
It was quite a bit of work but totally worth it! The piece turned out beautiful.
Thanks Ana!!!! Beth.
Makemeprettyagain.blogspot.com for complete details

My first build.using these plans I had to convert to u.k. Sizes and alter slightly but it turned out really well
Built for upcoming event.

This project was so fun to make. When we have a bigger room, we will put a slide on the other end. My son loves his bed!!

I love all the free plans. I built this one last year based off one of the plans. Edited to add space length and width, with an end for taller cans. by Chasity Abbott on Facebook

I can't believe I made these two picture frames thanks to wonderfully simple plans! We bought a painting in Italy 16 years ago and I was never able to find a ready-made frame beause of the unusual dimensions and I didn't want to pay for a large custom frame. Now I have one! The smaller frame accommodates an 8x10. Both frames are made out of the $0.89 furring strips at Home Depot.

We liked the look of the PB Benchwright living room collection but wanted to make a few modifications. The side table tops were cut a little larger and not perfectly round as we wanted to have a small flat surface on each side. We also wanted to have the same look among all pieces so rather than angle the legs on the side tables, we cornered it so it matched the other pieces. Table tops are 2x6 Douglas Fir boards that we added a 'V' groove in each of the seams and sides.

Enjoyed building this for my wife for Christmas

Took me a week to build but not bad for a one-legged man and no help. Instead of shingles I opted for corrugated pvc. Setting up shelves inside and going to build a bin for scrap lumber with scraps in the corner. I think I made some cutting errors on the doors there is a 1" gap between them. I put white marble stone down to keep it from setting directly on the dirt. - Edd

Followed the plan perfectly. A little too perfectly, as the table turned out so well that I have To go back and rebuilt the iSideTables ;)

Same as the plan, used Kona stain, but I left it on for 2 coats.

I have lived in my house for over 9 years and have never done anything to it until recently. I have made the commitment to move away from plain white walls and boring "plug-n-play" furniture. I discovered Ana's site a few months ago and have been a daily visitor. I made this dining room set with the confidence Ana's instructions gave me and I am forever grateful.

I made a few adjustments to the Parson Chair, making it longer in the back and used 5 degree angle instead of 15 and made the seat wider for our hefty hips and I used all 2x3s for the "chair bones".