Community Brag Posts

We modified the original plnas to convert one set of front shelves into thread storage.  We used  1/4" wooden dowel cut to fit 2 spools of thread on each.  

Made this for my 14 month old, this was my first ever attempt at making/building anything! Hand painted and assembled with inspiration from the Tennessee Titans. My son loves standing in it by the window watching the trucks go by our house so I added his own jungle gym steering wheel and bike horn. 

We made this table following the Rustic Console Table plans. We bought all the supplies at our local lumber yard so the cost was about $60 for the project. This plan turned out so great that we even made the matching side table:) It is sturdy, useful and plain and simple great for the space! This is a fun one to make!!

Thank you so much Ana for this plan. Our 2 year old is too big for a high chair and will not use a booster seat. He wants to be like his older sibilings and use a real chair. This was perfect because it is a real chair (no booster seat) and then we put a Mickey Mouse  on the back and he absolutely loves using it now. 

What a fantastic plan.  I made one for my granddaughter.  It has two advantages over the doll house I made years ago.  (1) It can be unstacked and shipped.  This one will be shipped.  (2) It allows the child to restack and rearrange rooms.  My grandaughter loves to rearrange things.  It is an "engineering inclination" according to her mother.  Well, she can rearrange these rooms as many times as she likes.

I made only one change to the published plan.  I expanded the rooms to 8" wide, 8" high and 16" long in order to accommodate a piece of furniture my son-in-law had already made.  Maintaining the 2-to-1 ratio keeps everything fitting together well.

Thank you again.

Wife wanted something that matched the comforter colors but looked a little antique-y. So I made her this!

I have been wanting to build a media console for a while and finally got around to doing it.

This is build 2 and I was really happy with how well it came together.  I used Douglas Fir again as it takes the vinegar and steel wool mixture really well.  This piece was hand waxed for a different look than my corner table.  I love the tight grain in the top and how the variations in the grain caused some of the wood to appear almost white while the rest of the top is very grey.

I made this from Anna White's plans. Thanks for your idea and the plans. It is made from Mahogany, Pine, and I used 1/4 aspen plywood for the back. I made the face frame (rails and stiles) with the Mahogany, and did mortise and tennon joinery and then attached to the shelving. I made the raised panel doors out of Mahogany also and made the crown moulding as the trim piece out of the same species. The shelving and back board is from pine and capped with mahogany trim on the shelf edge. The door knobs are not yet on in the picture, but I used solid wood round knobs and stained the same colour and located the knobs up near the top of the door stiles.

Stained in Dark Walnut Minwax Water based and finished in Varathane Semi Gloss water based.

I wanted a tree feature in my living room, but I also needed a lighting source. I saw this coat tree and decided that I would make it into a lantern tree with some hand-built, simple wood lanterns. The result is an inexpensive standing "lamp" of sorts, using scrap wood and 2x2s. I have plans for adding a punch of color to the tree, but for now, I love the clean lines and the unique simplicity of this piece of solid wood furniture.

I've been seeing a lot of window panes turned photo frame and really liked the look. We didn't have any extra panes around but I did have a bunch of scrap pieces of 3/4 inch plywood so I decided to make my own!

We built our coffee table to match our farmhouse entry table! I love the tutorials from Ana White! We made changes to the bottom shelf and used 2x2 slats instead of the 1x12 pieces. Also changed the dimensions so it measures about 56x34 (kept the height the same). It complements our living room perfectly! I can't wait to built end tables next! 

I used the countersink drill bit and Elmer's wood filler, but the the wood filler didn't take the stain/poly well.

i was able to rescue a few doors out of a roughly 140 year old house.  so the idea of a head and footboard came to mind.   the headboard is oak was the front door, and the footboard is pine from bedroom.  these were not taken apart just sanded cut to length and finished.   now everyone around me wants a pair.

I really didn't want to need to feed/water the chickens too much, but at the same time only having four didn't really necessitate a massive system. I found this video for a feeder (https://youtu.be/pzW4YytXYaQ ), and then bought some sideways chicken nipples off of amazon and <~$20 later it was done. I've since gone in and made the street elbows for the feeder a little longer than he recommends, which has made them truly zero waste. 

Also, a couple of good wheels from Tractor Supply (https://www.tractorsupply.com/tsc/product/titan-casters-4-in-rigid-poly…) on the one side and some handles on the other and boom, chicken tractor. 

Finally, I noticed one person that had extended the rungs on the ramp out... my chickens love that and are on them almost all the time. Lastly, I put a quick 1x2 at the top of the ramp to keep the chips from spilling when I move it, but they really like roosting there, now.