Community Brag Posts

Used Maple on top with pine for the frame. Thanks Ana-White!

This bedside table is sooo easy to do. My husband and I made this table in about 1 1/2 hours. Of course, this doesnt include the time it took to paint and stain. When the cutting and nailing is done, so is my husband. Finishing the projects is up to me! lol Following the plan precisely makes this easy to build! The only thing we did differently is that we added an outside stretcher across the bottom front. I love love LOVE this table! I purchased the drawer pulls from Lowes on clearance for $1.19 each.

We wanted to add some storage to our Ikea Kura bunk bed. We needed to adjust the size of the day bed by a couple of inches but worked awesome. Looks like one finished bunk bed.

I built it from pine 2x4s. I bought outdoor chair cushions and they work great.

Here is my step stool that I've wanted to make for quite some time, but didn't think I'd need it....until the other day when I couldn't reach something in my garage. This will give me just enough height to reach items in my taller cupboards in my kitchen as well. I think it turned out pretty cute. I cut out a stencil design with my Cricut and used black acrylic paint with a dry brush.

Tomorrow I will give it a light coat of poly just to protect my stencil work mainly.

I used 2x2's intead of 1x2s because I had lots of scraps of those lying around from other projects I've made off of Ana's website!

This bench was so easy to build! It's the first project that I've built completely with the nail gun. Wow does that speed up the process! Thanks again for the great plans, Ana!

A great project!!  I love how it turned out!  I used Poplar wood because I wanted a larger top than 1 inch but smaller than 2 inch.  Poplar had an in between size.  I love how it turned out!  Need to make another one now for my living room so that I have a matching set!  Thanks Ana!!

I adapted the plan to make a stand for our printer and shredder.  Except for one board, I was able to use scraps so my total out of pocket was $9!  I did plane the 2x material to 1 1/4”, and also used 2x material for the base to add a little strength to hold the shredder.  Thank you Ana White, for generously sharing your plans!

I worked on both the kitchen table, the dining table as well as the bench seat and all eight parson chairs together, so it took over a week to make this. I think if you were just doing the table you would be looking at a weekend project. Go hard or go home, unless you are home...

The kitchen table was just a case of shortening Ana's plan to about four feet. I made a quick and dirty table leaf to attach the two tables. For more info see my blog. There is also info on making those Parsons chairs too.

My Blog: http://landlocked-art.blogspot.com/2011/10/farmhouse-dining-table-and-b…

We adapted the original barn beam ledge plans on a much larger scale to occupy the bare wall space above our couch. Each ledge was 5 feet in length.

Modified the cubby plans to just be 5 cubby's wide. My wife wanted white so I dressed it up a bit with the bead board, trim and crown moulding.

This is my first wood project, and first time using a Kregg jig.  A HUGE THANK YOU TO ANA!  Next is the matching end table and then outside chairs and a pagoda.  

Jeff F.

Table was a little tricky for me and the wood kept splitting and the legs didn't seem very sturdy. The wood I have isn't the straightest so that gave me some trouble. Changed the dimensions of the table to 24" x 36" and used a lodge pole pine board so the top is a solid piece instead of the 1x8's keep the junk from collecting between the slats. The chair was pretty easy to build and my kids just love it. Thinking I will paint the table and chairs a high gloss white so it is scrub able and look good in our house.

We needed a couple of sturdy step stools for the bathrooms. My boys are not tall enough to reach the sink for hand washing and teeth brushing. Wally wanted $8 for a plastic thing. So I headed to the big orange store and bought a few 2X4's. $12 for both stools, plus the paint and screws which I already had.

I used the plans from the Skipper's Stool for some of my cuts. But I used 3-2X4 pieces for the top and shortened the legs to 10 inches. I was going to put on the side stretchers but it was super sturdy with the pocket holes and 2.5 inch pocket hole screws. So I left them off. A few coats of paint and they are good to go. Two of my boys can stand on one so that makes them a hit.

The plan had excellent bones, though I modified the top to hold a sink for rinsing and cleaning.  It is now painted "San Antonio Rose", and resides happily in the backyard.

Okay, I hope you like this... it was the second and third thing I ever built!!! The table is made from 2 doors hinged together with accent hinges screwed on top. In the middle there are locks (hook and latch) for design. The frame is oak. measures 81X 56 and fits a good 10 people around.

The bench is an old cherry tree slab that someone I know did not want. its about 72 inches long and it is slighly curved. I ushed a shilac and kept the same color....  I just sanded it down.