Community Brag Posts

Changing Table

Furniture Style Dog Kennel
Barn Door Creations on FB.

This is my third project from this site (ok, third project EVER). I was coming on to look for doll bed plans, and the Rustic X Console showed up on my screen....I loved it instantly, and knew I had to try it. My husband ran out and picked up a Kreg Jig for me, and we spent a couple evenings on it. Had lots of fun, though now I know why Ana says to make sure you buy straight boards--the middle shelves were not straight, and that was frustrating to work with but we made it work! Now I just need to figure out what I'll be using it for.

I loved this coffee table plan. I found it on www.morelikehome.net and also linked on Ana White's page. My wife and I loved the size and also the number of drawers for storage. I would say that the plans were great and I had to only make minor adjustments due to my own errors.

It took me about four days to complete. I used the Kreg jig to complete most of the joining. I put it all together by the end of the second day. It is solid as a rock. The last two days were mostly staining all pieces and then restaining to get the right finish. It also took a couple more weeks to find pulls and get them installed. But now it's all done and we love it already!

I built two chairs for my wife and I and a little table (for beer or wine). I made the table out of scrap that I had left over. My favorite part is the paint color I chose. Thank you Anna!

It’s a 5’ round table with a 4 way herringbone design.

lumberjack_farmhouse

I wasn't very experienced when I built this table. It was only my second big piece of furniture (farmhouse bed was my first) and it was the first time I had every used a compound mitre saw, which my husband had just bought for my birthday. We had no dining room furniture, so I made the 2 benches to go with, until we could set aside money for the ever so expensive dining chairs. (We'll keep one bench for sure for the kiddos!) My seasoned carpenter husband was so impressed when he came home from out of town to find this table done just in time for the holidays. I love it so much and am very proud of the finish since it was the first time EVER I had used stain or poly. We did order materials for the stretchers, but haven't put them on yet. They were from Fastenal and are pretty pricey - but hopefully, they'll give the industrial touch to finish it off. The whole project took me under 2 weeks - but it would take far less for someone who is more skilled and doesn't have to stop every 5 minutes to tend to 2 very active toddlers.

First furniture project with my Kreg Jig. Went smoothly. Loved the plans and how descriptive they were. This is a great beginner project. It only took me about 2 hours to complete.

Slight modification to the original plans. Used all 2x6's across the top and added capped ends. Used 2x3s instead of 1x3s. Cuts and assembly were not time consuming, sanding was!!

Project took a lot more time and patience than the last few little ones that I have done. I like the simple outdoor table but wanted a little bit more. I used the basic concept and mixed it with a patio table from PB that I really enjoyed but didnt want to pay $800 for. The table looks fantastic and am still debating on what type of finish, if any, to use. Hoping to make the matching bench soon for one of the sides of the table.

I threw some plans together for this.  Going to make another one and tweak it a little but overall I'm happy with the way it turned out. I used dark walnut stain and 4 coats of poly.

We had to build a king-size headboard in our 2nd floor bedroom, because the stairway clearance was too small to fit a headboard up the stairs. We added a couple vertical stabilizer boards.

I made this table out of a free pallet. The legs are cut off of an older scraped table and then I used poly with no stain. I used 1x2 furring strips in between slats to make tabletop solid.

This was my first attempt to use real power tools and make furniture. After being inspired by Ana, I purchased my Kreg Jig and got to work! I needed a coffee table so I tweaked this one to fit my needs. I ended up staining it with Minwax Gray, but it wasn't rich enough for me. So I took white, black and brown pain and dry brushed it to give it that old barn wood look.....OMG I LOVE IT! It came out perfect. So much better than in the photos even! Thank you for the inspiration Ana.....What will I make next???? Hmm......

I absolutely loved this project! My first advanced' leveled project! I was afraid it would be to big for my room so I went 10" smaller in the width only. It surprisingly turned out well proportioned! Thanks Ana! I feel like a women with power!!