Community Brag Posts

Reclaimed wood nightstand

Thank you for the great plans!  I modified it a bit to fit our needs.  I made the footboard identical with the headboard; added feet from Osbourne Wood and finials I found on Etsy.  To accomodate the feet, I made the vertical corner posts flush with the siderails and head/foot boards.

Farmhouse Coffee Table with a bit of Rustic "X" Coffee Table. Thank you so much for the plans. This was a nice build. I opted for pocket holes and panel glue up so for me, it wasn't a one day build. :)

This is my most ambitious build so far. I wanted to make a really nice piece of furniture and I needed a bed so this is it. I wanted drawers and I wanted to make an upholstery headboard so I this is what I came up with. The headboard was so simple and took only a day. I searched youtube and found a video walking you through the process and was surprised at how easy it was. I built the bed with oak but I would do it differently next time. As it turns out I don't like the grain of oak and its so porous that I spent A LOT of time on the finishing part. I used wood grain filler to take away the porousness and used a series of stains and glazes to get the finished look I wanted. All in all I'm happy with the result but I think I could do it better next time.

This was my first Farmhouse bed!  I am totally in love with how it turned out!  These plans were very detailed and easy to follow.  I added some fancy trim like in the Mom's Fancy Farmhouse bed. I also changed the way I attached the side rails.  I used siderail supports from Lee Valley as I wanted to be able to dismantle the bed for easier moving if needed.

I am also thinking of adding a trundle to it.

Thank you so much Ana, for these wonderful plans.

I have made numerous items from your site and will continue to do so. 

Easy to put together and quick! A great set of plans which produced a very sturdy bench. Some adjustments were made, as we had spare 1x3s which we used to expand the bottom shelf.

We pre-cut everything to specification. We only needed 6 2x4x8s. We only broke into the 7th because our cuts for the cross bars on top came up short once it was together and we had to recut. Just save the 12 inch boards to cut when you need to add them to ensure the measurements are accurate. The top was glued and nailed together with brads, a bottom layer of 1 inch pine with a top layer of 1/4 oak plywood on top. It was what we had on hand and it provides the strength needed with girth yet the hard exterior of the hardwood ply.

Our youngest was done with his little boy bed and so we decided we should make him a bed - he picked the clubhouse bed and we went to work. This was a fun build - I used the "Kreg" Jig for just about everything. We decided that he would need a new bookshelf and thought the truss shelves would look great next to the bed. He is so proud and excited for his big boy room, thank you Ana and Jaime for the plans and tips.

With three boys ages 17, 14, and 9 sleeping in one small bedroom, an efficient bunk bed/loft bed system seemed to be the perfect choice. I used the bunk bed plans from The Handbuilt Home, but I increased the height, and moved the steps to the end. The loft bed is basically the same as the bunk beds, but without the bottom bunk. I left the top rail off the head of the loft bed, creating a space so that they could crawl from the top bunk to the loft if desired. The short side rails on the top bunk are attached to the head of the loft bed.

The beds are modular and could be stand-alone beds, but I used TimberLok heavy duty wood screws to screw the beds together at the "intersection" on the bottom rail of the top bunk and loft, and the bottom rail of the bottom bunk and loft. That makes the beds very sturdy.

The entire system comes apart for storage or if a move ensues later. One other modification gleaned from a brag post was to use spacers on the cleats of the side rails so that you can just lay the slats down without having to screw them down. What a time-saver!

Thank you Ana White for the lovely plans and to all the brag posters for the ideas.

My husband took care of cutting, drilling and putting together the table. I took care of sanding, staining and sealing. It was an easy project. Thank you for the plans, our kids love this table! 

My name is Nan Farley.  I am attaching the finished garden bench (my 2nd wood project) that I created with the help of your free garden bench plans.  Thank you so much for sharing your videos and plans with us.

I love this plan and this table. This was my first project, and I think I turned out really well.

We built the farmhouse king size bed over the last week. We used 2x4 hangers to hold the 2x4's in place and used 2x4's to support the mattress. We put 7/16" plywood on top of the 2x4's to support the mattress. We struggled with how we were going to attach the side rails to the bed frame and finally came up with a way we felt would be strong enough. Please see the pictures included to see exactly how we attached the rails to the bed frame. We used lag bolts, and metal brackets.

I shrunk the size and dumbed down the plans to fit my skill level.

My father loved his woodworking and refinishing antique furniture. He built a wood shop years ago and loved spending he retirement years in there. He enjoyed going to auctions and the like and picking up antique pieces for $5 and $10. He had an antique oak dining table that someone had given him years ago. Cancer took him 4 years ago and he still has that shop full of antiques. I came across the old table and it was in sad shape. It was literally in several pieces and the legs were cracked. I decided to refinish the table.

I had some oak plywood and 1" by oak left over from other projects. I went ahead and removed all of the bracing and replaced all of it. I began stripping off all of the old finish. The underside of the table had been painted. The legs were the real challenge. Not only were the legs turned, they are fluted. I stripped off what I could with liquid stripper. I then used a power washer to help remove more. I then began sanding by hand every nook and cranny. I then filled all of the little cracks with wood filler. I used pin nails on the larger cracks. Once everything was stripped I began seeing a beautiful patina that only time can create.

I then began staining with Minwax Aged Oak gel stain. I used 2 coats on parts and up to 4 coats on other parts trying to get a uniform appearance to the wood. I used between 3 and 6 coats of Minwax quick drying polyurethane on the table. I sanded with 220 and 320 grit sandpaper between coats. I think it turned out pretty well.

The only thing I really had to buy was new casters. I think I spent about $10 for them. Everything else was left over from other projects. I worked on the project here and there between other projects I was working on. I think I probably had around 20 hours total on the project. Stripping and sanding the legs took the longest time. Somehow I think dad is smiling down at me when I finish his projects he had on the back burner.

Made this loft bunk a few hours at a time, over the course of several months. Spare time and weather in Utah has been less than cooperative. I used some back pack strapping screwed to 1x3's for the mattress supports. For the finish I used 2 coats of paint with primer, and 3 coats of high use water base polyurethane. With a 5 and 7 year old I didn't want to be worried the paint would be getting dented and chipped off for a long time. I wanted to stain it originally but failed to remember to wipe off the wood glue before it dried so it got painted. This was a very fun project to build, my son loves it. Now to build another one for his sister.

I made several changes to the original Ana White plan. I wanted to build a bar height table for my husband's man cave. I left the length at 5ft long, but instead of dinner table height, I raised it to be a bar top. It perfectly accomodates typical bar height stools, as seen in the picture. 

www.withlovefromgablog.blogspot.com