Community Brag Posts

Modified Simple Outdoor Dining Table

Submitted by Fred C on Mon, 07/28/2014 - 12:17

When I wanted to build a new outdoor dining set, I immediately turned to the Ana White website to browse the plans. I chose the simple outdoor dining table and this is my much modified version of that plan.

I liked the look of the table and the bench and the vertical slats but I needed to modify the plan to build a larger table that could seat as many as 10 if needed. I also wanted a curved bench top because of aesthetics and because it's so much more comfortable. I soon realized that I wouldn't be able to keep the vertical slats in the bench and get the curve I wanted. Once I went with horizontal lines in the bench I modified the table to match.

I finished building the tables and benches at 3 am on a Saturday morning, just in time for a family BBQ at 6 pm. There wasn't time to apply a finish, but I plan on using a golden pine stain and semi-gloss clear urethane sealer with UV protection.

Poplar was on sale when I went shopping for wood. It wasn't my first choice but the price made it hard to turn down. Because the legs sit directly on the ground I chose pressure treated 4X4 lumber for those.

Although the finished product is much different than the original plans for the simple outdoor table, I hope you enjoy seeing what I was able to build from that starting point.

Estimated Cost
$250
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
As stated, the photos show the unfinished table and benches but they will be stained golden pine and weather sealed with a semi-gloss urethane finish.
Recommended Skill Level
Intermediate

A little shorter, a little wider

Submitted by Anonymous (not verified) on Mon, 11/07/2016 - 17:25

This is the first piece of furniture I've ever made.  Great plans.  I shortened mine 10 inches by reducing the height of the legs, filler pieces, and ladder.  My daughter loves it!

Estimated Cost
230
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Paint
Recommended Skill Level
Beginner

Tall Planter

Submitted by Anonymous (not verified) on Tue, 07/28/2020 - 15:51

Could not find cedar fence pickets that did not have dog ears. Used 1”x6”s instead. That also helped with strength. Followed your directions and then added a top “shelf” and stained the planter. Lots of fun.

Built from Plan(s)
Estimated Cost
Less than $35.00 including stain and brushes
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Stain color is called “ Gunstock”.
Recommended Skill Level
Intermediate

X Coffee Table

Submitted by mcputs on Sun, 10/07/2012 - 17:41

This is the Rustic X Coffee Table without the rustic finish. I used cedar wood with Early American stain. This was my first furniture project and I am so happy I did it. We needed a coffee table badly and I couldn't fathom spending several hundred on a good one. This one saved money and I appreciate it so much more. Because I used cedar the cost of the project was about $100. I used pine on the 1X12s on the bottom shelf and once stained it looks just fine. I did not stain the under side of the table top so as to maintain the smell of cedar.

Built from Plan(s)
Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Stain: Varathane - Early American
I started with Varathane Wood Conditioner, then applied one coat of stain, wiping with a cloth after application. To finish I applied two coats of Minwax polyurethane.
Recommended Skill Level
Intermediate

Comments

jlynchtx

Fri, 01/05/2018 - 23:10

The table look great! Thinking about building one myself soon? Have you noticed any warping or cracking of the wood since you built this? 

rustic x coffee table

Submitted by rebecca.g on Wed, 07/30/2014 - 05:45

My first piece I made from this site. Absolutely love it! Slight modification on the X bars to add more depth to the base to balance the heavy look of it

Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Minwax english chestnut and polycrylic protective finish
Recommended Skill Level
Beginner

Crayon bed

Submitted by Anonymous (not verified) on Sat, 11/12/2016 - 19:26

My son loves to color so we decided to make him a bed that looked like crayons 

 

The headboard is mounted on the wall with a french cleat 

The footboard is mounted to the metal bed frame with carriage bolts 

The entire project is made of shiplap board which gives it the drooves in between each "crayon"

Hardest part was getting the crayon tip risht and transferring it to each board 

Longest part was taping, painting, waiting, paiting, removing tape, retaping ....... and continue 

We used behr bright white paint and then paint samples for the colored parts and finished it with general finishes satin top coat

 

Turned out better than expected especially since this is only my second woodworking project ever and my son loveeesss it !!! 

Estimated Cost
75
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Beginner

Patio furniture

Submitted by Anonymous (not verified) on Sat, 08/01/2020 - 07:29

Built this amazing patio set using Ana White’s design. Just added extra back supposed to prevent the cushions from falling over. Very sturdy set!!

Estimated Cost
$120
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Exterior finish in a dark walnut color
Recommended Skill Level
Intermediate

Farmhouse Bench

Submitted by Mikia on Tue, 10/09/2012 - 23:43

A 1m version of the farmhouse bench. We needed a shorter one for the hallway and realized that the only way would be if we built it ourselves. My bf and I built this together and it's really sturdy. Some adaption to the plan was made since it's shorter. It's very useful and we all love it. It's used each and every day.

Estimated Cost
200 SEK
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
Stain.
Recommended Skill Level
Starter Project

Outdoor Table and Benches - First Project

Submitted by linlet_e on Sun, 08/03/2014 - 10:26

First project of my husband. He had no experience at all in making furniture but when he stumbled on this website he was inspired.

I wanted to contribute so I volunteered to stain both the table and benches.

Modification: used 2x4 for the legs of the table

Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
For the Table:
Cabot - Australian Timber Oil: Honey Teak.
I used a total of 1 & half cans (946 ml per can). I did it by sections - used paint brush to apply stain, gave it enough time to absorb (a few minutes) and then used a cloth to even out blotches. I also used a very small foam paint brush to stain the areas that are hard to reach - the gaps in between boards. Waited a couple of days to apply coat number 2.

For the benches:
Benjamin Moore Arborcoat - Solid: Spellbound
I used 1 can for both benches (414 ml). Again did it by sections, used paintbrush to apply 1 coat only and used a small foam brush for hard to reach areas. It dried very fast.
Recommended Skill Level
Beginner

Comments

Bar Height Farmhouse Table / Benches

Submitted by Anonymous (not verified) on Tue, 11/15/2016 - 12:07

I wanted to say thank you for the inspiration.

I took the general idea, made it bar height and my own preferred size and beefed it up by doweling together the top pieces.

Given the size, I made the top removable with threaded inserts as well as the removable support beams below.

For the benches, I wanted something sturdy and a look that was similar to the table.  I added in a nickel support rod for the foot rest for both strength and a nice look.

All in all this project took a lot of time, probably more so with my perfectionist ways and wanting to  make the finish perfectly smooth.  It's like glass, which I just love against the dents and dings of the wood.

Some of the challenges were wood that warped.  After putting together the bench tops, the wood warped quite a bit, nothing that a few clamps couldn't undo but a pain nonetheless.

Using black stain really brought out a nice look and I'm taking that same look to the new trim and door that are going into the dining area as well.

 

I've not seen a bar height (not counter height) table in a full dining table size before, it's what I wanted and I couldn't be happier with the results.   Was it worth all of the time?   That's hard to say, I really love it, but it took a long time to get it to be exactly what I wanted it to be.

Thanks!

 

 

Estimated Cost
$180 in lumber, $200 for stain/poly/sandpaper/steel wool/Kreg jig/screws. $20 for furniture screws that look sharp and allow the table base to be easily disassembled. Another $20 for threaded inserts and machine bolts to hold the top to the base.
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Ebony Minwax oil based stain and Satin Poly.
Pre-stain, one coat of stain, wipe after 5 min, three coats of poly using steel wool (00) between each coat.
Recommended Skill Level
Intermediate

Big Kids Picnic Table

Loved your plans for this and built a table for my 4 year old grandson who could destroy a box of rocks if given the opportunity! I was able to get by with (5) 2X4's instead of the (6) called for in the plans which was even better since I've now got an extra one for the next project. I used pocket hole screws, #8 x 2-1/2" exterior grade screws, and some Thompson's Water Seal and everything turned out even better than expected! Virtually no "scrap" to absorb either. Thank you for sharing your plans - I'm looking at those for the full-size version for someone that has asked if I could build one for him!

Built from Plan(s)
Estimated Cost
$30 - $35
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Thompson's Water Seal Natural Cedar

Mirror Project from the book!

Submitted by JoanneS on Sun, 10/14/2012 - 05:54

This project is the mirror from page 37 of The Handbuilt Home. I received my copy on Thursday night, built this and painted on Friday, then (impatiently) waited 24 hours for the paint to dry before distressing and hanging it up yesterday afternoon. The mirror was a plain one I found at Lowes for about $20 and attached with mirror clips. I attached to the wall with 2 1/2" screws through the frame into the wall studs. I was going to leave the screw heads exposed for decoration, but now I think I'll add a dab of gray on them to blend them in. This was a super fun project, easy to do. Love the book, and can't wait to build more projects from it! Ana, fab job on the book!!

Estimated Cost
$40
Estimated Time Investment
Afternoon Project (3-6 Hours)
Finish Used
1 coat white paint, 1 coat gray paint (greek column by Ace), after 24 hours, sanded with 220 and some 100 grit sandpaper to distress, then added a coat of soft wax to protect the surface.
Recommended Skill Level
Beginner

Comments

itzann

Sun, 10/14/2012 - 10:19

Very nice! I kind of like the black screw-heads showing!
-Ann

JoanneS

Sun, 10/14/2012 - 14:25

Thanks Ann! This was a fun project. I've been wanting a mirror to match that table since last year, and this one fits just right. My family said they liked the visible screws too, so I'm going to leave them as they are.
:)
Joanne

JoanneS

Thu, 08/29/2013 - 13:57

Ana, Thank you so much! I can't wait to get building on more projects from the book and from here too! You are awesome! :)

YankeeBelle, thank you! How do you make chalk paint? That sounds like a great time saver!
:)
Joanne

Garage Storage Cabinet

Submitted by AndyH on Tue, 08/05/2014 - 18:57

First part of garage storage system complete. 7.5 foot cabinets with whiteboard marker board doors inserts.

Next step to build new bench with storage cupboards to keep dust out and a central dust extraction/containment area.

Then put some tool board and a charging station above the two outlets.

Estimated Cost
$100
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Classic Gray
Recommended Skill Level
Beginner

Comments

TaylorMade1205

Wed, 08/06/2014 - 05:51

What plans did you use to build the cabinets? I'm currently re-doing my garage and I was looking for something like this.

AndyH

Wed, 10/08/2014 - 19:20

Hi.  I drew the plans myself to make it fit the space I needed.  Happy to share the google sketchup file with you if you want to send me your contact (if that is allowed on here!).  Sorry for the delay in replying but not logged on here for a while. 

SAWL27

Sun, 12/13/2020 - 05:04

These are perfect for what I'm working on. Do you still have the plans that you're willing to share?

thank you ana you inspired me to begin with this!

Submitted by Anonymous (not verified) on Fri, 11/18/2016 - 18:13

Thank you Ana because you were my inspiration. I would've never dreamed of building my own furniture before I saw you doing it. I loved doing it I loved outside the US and the machines and jigs are difficukt and expensive here but I've managed to get the basics. this is my 5th project and was a lot of work because the woods here are exotic but not dried in kim and come with lots of imperfections but are beautiful..anyways thanks again! 

Estimated Cost
250 usd
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
wood sealer then 240 sand paper then polyurethane high gloss the same finish used for cars.
Recommended Skill Level
Intermediate

Farmhouse bed with drawer storage

Submitted by SE-Mark on Sat, 10/20/2012 - 22:56

I had to come on here to thank you all for inspiring me to build this bed! The thought of building such a big piece of furniture never really occurred to me until I saw the Farmhouse queen plans, which really got the gears turning.

I wanted to add some storage to the bed, though, and so I kept looking at other projects on this site. I don't know which plans are all combined into this one, but you can see the one side table in some of the pictures which is based on a hutch plan here, and the concepts there are used in the drawer fronts on the bed. I still plan to build a matching side table for this side of the bed and also a dresser unit to complete the bedroom set.

This entire project was built on my deck as I don't have a garage. Started at the end of September and working by flood light on nights where I could find the time. It was finally moved inside to paint. The bed is built into four sections for disassembly - headboard, footboard, and a base section that is split in half with knockdown fasteners. The headboard and footboard are also attached with knockdowns, so the entire bed comes apart with an allen key.

The cost was incredibly low. My biggest cringe costs were for the 4x4 posts, which I had to buy in cedar, and the birch 3/4" plywood for the drawers. All in costs are still under $200, though I did own a Kreg system which got used a fair amount.

I did modify the footboard / headboard construction since I had the Kreg system. Rather than using a 1x4 backing board with 1x verticals and a 1x4 front board, I used a Kreg'ed 2x4 as the backing board, flush to the 4x4 post... no 4 1/2" screws required! The 1x verticals were then glued and nailed onto the 2x4s, and the 1x4 front board was glued and nailed to it.

The drawers are huge! 29" wide x 26" deep x 14" tall (more or less). Also, they are positioned so that when a side table is placed beside the bed the drawers can still open. The panel at the head of the bed is a door with a magnetic catch. I think of that area as 'deep storage' as you would have to move a side table to get in there. The door is there to get there if you want to though.

One cost not accounted for... my 'work bench' patio table sustained an injury. I still maintain I did not drop anything onto it. In fact, I was using a tape measure to measure a drawer length when the glass shattered out from under the piece I was measuring. It was cold in the morning, so maybe that had something to do with it. But now I just have to add 'fix patio table' to the project list.

Thanks again!
Mark

Estimated Cost
$200
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Tremclad / Rustoleum semi-gloss white.
Recommended Skill Level
Intermediate

Comments

5 tator tots (not verified)

Tue, 10/23/2012 - 19:04

I can't wait until we have time to build a farmhouse storage bed. Yours looks great!.

jaimej

Sun, 01/06/2013 - 19:35

Very smart placement of the drawers - I too am aspiring to build this some day and wondered about a fix on that - do I just store things in that drawer I rarely want to get at? No, I like your idea better. Beautiful job on the bed - it looks nice.

niki

Sun, 11/10/2013 - 17:49

This is exactly what I'm looking for. I love the drawers. Would you be willing to share more on how you did those, vs the plywood boxes in the plans?

SE-Mark

Thu, 03/20/2014 - 11:40

Sorry for taking so long to reply to your question! I missed it.

I don't have any pictures / details on how it was done, but I can explain it. The front face is built as a 2x4 surround with 1x6 inset boards. I then put a dado in the bottom side 1/4" up from the bottom.

I then made a drawer box from 5/8" plywood, kreg jigged to the front face. A 1/4" piece of plywood was used as the drawer bottom, and inset into the front face of the drawer.

This all sounds a bit difficult and confusing, but it isn't. Maybe I should take some pictures. Let me know if you'd like to see them.

briankerr

Wed, 07/30/2014 - 10:55

Great build! I'd love to see some more photos of the drawer surround/frame with the drawers out. Is it all 2x3 stud construction? Any problems with warping or the drawer slides not square/plum?

omegatek

Thu, 10/16/2014 - 10:22

Racking my brains out trying to figure out how you laid those slats across the top of the drawers...  If you wouldn't mind posting a few more pics, I would really appreciate it.  My daughter wants this for her birthday. 

Thanks!

Haven Turned leg Coffe table

Submitted by creegs7882 on Thu, 08/07/2014 - 10:25

My wife does puzzles and most of her school work on a coffee table. We had bought one from that large blue and yellow warehouse furniture store. I liked its size but never the materials. When I saw the Haven Turned Coffee table, I knew I could make that. Using the pocket screws made this an easy build. I made the top out of 1 x 8's and used biscuits to hold them together. I attached the top using a series of cleats around the inside edge. I stained it with an cherry Minwax stain and polyurethaned the top. Project took about four days on and off not including the staining and urethane.

Estimated Cost
~ $ 125.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Minwax Cherry Stain and Polycrylic Polyurethane (gloss)
Recommended Skill Level
Intermediate
Back