ladder shelf build
Thanks for the plans had to go with something like this to avoid putting cabinets in and risk hitting a water line in the wall.
Thanks for the plans had to go with something like this to avoid putting cabinets in and risk hitting a water line in the wall.
I finally did it! I purchased mattresses for our two girls (2 & 4) which have been just sitting on the floor for a while. Wanting to build some simple frames just to get them off the floor I ran across Ana's site. Oh boy! This site is amazing! We have a small house with very little storage so when I saw the storage daybeds I was smitten! The extent of my power tool comfort zone is dimensional lumber and a compound miter saw. Not plywood and definitely not the table saw, so I was a little leery about starting this project. In the end, I tackled it and am so glad I did! Even used the circular saw! Full disclosure, there's probably nothing square about the thing (see additional photos), but like mulch in your garden, trim covers a multitude of sins! I learned a lot and will take my time measuring and squaring for the next one. Also, as some readers commented, I would prime and do at least one coat of paint prior to assembly (that part was definitely time consuming). I also wanted the storage to go all the way back to the wall so I didn't include the center piece of plywood but instead trimmed down a 2x4 to a ~2.5" width and glue/screwed in into the plywood at the top center under the top piece. So far so good! On the finish, I wanted a distressed finish and started using a dark walnut stain but did not like how much it adhered to the paint as well as the sanded down edges. When I picked my daughter up from pre-school that day they had been doing flower rub pictures. I saw that the centers of the black-eyed susan’s and cone flowers came out a beautiful brown color. So when I got home my daughter and I went out and cut some old flower stems and we finished the other two cubby cubes that way. I think it turned out really well! I didn't end up top coating it with anything, I liked the scuffed up paint look. A big THANK YOU to Ana for doing all this work so we can too!
After finishing the farmhouse queen bed, I was eager to start another project. I needed bedside tables and I came across plans for the mini farmhouse bedside tables. After the building the first one, the second one went much quicker. Very happy with the results :)
Tue, 10/22/2013 - 09:21
Really nice work on the bed and the tables. I love the look with white legs and stained top/shelf.
In reply to Beautiful! by mom of 4
Wed, 10/23/2013 - 19:34
I was very happy with the way they turned out. I just finished a storage bench with the white bottom and stained top, I'll post pictures when I get a chance :)
Super easy project. Both tables matched almost identical. Buying wood from Home Cheapo/Nowes makes it a little tougher because they aren't as straight as they should be, but a little sanding never hurt. Plan on making a few more for the other rooms.
Made wider for a king and modified platform bed. Used a weathered oak stain followed by a 50/50 whitewash.
This was a build to convince my wife that I should do the cabinets in our new house...now I have to do them all. I should have just said, Sure, go to Ikea!"
Mon, 02/20/2023 - 10:36
Looks amazing, fantastic work! Thank you for sharing and happy building!
OK, first off this is not in any way, shape or form the Ana White plan for the Reclaimed Wood Headboard. However, I had to include a plan link and it IS a headboard made with reclaimed wood. So yea, air quotes. Second, I apologize for the poor quality photos of my recent brag posts. The digital camera is gone so these are iPhone specials. On with it now. This is my quick and dirty way of making a headboard, and kind of cheating. All you're looking at in these photos is some 2X3s and 2X4s around an old door to the root cellar in my basement. That's right, for once my main source of building material was not a pallet. As I took the door off the old rusty hinges and cleaned off the dust and cobwebs it occurred to me that this was probably original to the house from 1920. With that kind of history in mind the only thing I could do was take a saw to it and hack off 18 inches, oops. The 2X3 posts on the side were actually supports for a shelf that was made from a door(more on that to come). That shelf was actually found in the root cellar the door was for, this house has been pretty beneficial to me so far. The 2X4 top is from a pallet and aside from a 2X6 at the bottom to attach it to the bed, that's it. After that it was simply a matter of some oops paint on the trim(that would be the red) and a bit of sanding once it dried. The white is simply the condition the door was in.
Mon, 10/31/2011 - 11:21
And I'm really diggin' how the headboard turned out. Nice!
Mon, 10/31/2011 - 12:29
That is one cool headboard (air quotes!) and a very unique piece. Sweet!
I made this little table for my sister-in-law. She needed a specific size to fit in between some bookshelves. She is going to put a lovely fish bowl on top. It cost me about $10 for the wood and paint. I modified Ana's plans for the "simple, cheap and easy console table" to fit the space.
My very first Ana's project, I used the left over baseboards from our house remodel and the extra fabric from our tablecloth for the cushions. And first time using power tools and the kreg-jig I got for my birthday .
I started creating the furniture for my new craft room by making the Easy Three Cube Benches I found here. I modified them so that my cats could lay on top and look out the windows. The cube benches gave me the confidence to design a printer stand. Using Ana White's technique of "build the box" and then add the rest, I designed a custom printer stand I am so very proud of! After the printer stand, I moved on to the final piece that would complete my craft room, a modular desk with plenty of workspace to complete any craft I want. I modified each module a little to keep with the theme design of the room. I created three modules. The last one being a bookcase that is a modification of the Modern Craft Table bases. I used better quality Oak plywood for the desk top, and good pine and whiteboard plywood for the modules.
This was an easy project t to build. Decided to go out of my comfort zone and burn all of the wood before adding the finish. I loved the design of these plans and my aunt wants me to build one for her.
Fri, 02/24/2023 - 11:53
Looks fantastic, you're aunt will be happy with that! Thanks for sharing:)
Built this for my 2 yr old son. It's adorable!
The only trouble we have is that when he climbs in it wants to tip forward, a weight or stake into the ground on the back cross brace would probably solve it.
I wanted a fairly simple project to get started with, something I could make use of around my home and to help me get familiar with my new power tools - well, this project did the job nicely!
I'm extremely happy with the way the planters turned out and have already had other people asking me about them as they would like some too.
These planters worked out fairly expensive for me as the materials were extremely good quality and very heavy duty in size, I think I could get away with using slightly less robust materials to bring the costs down next time.
I had difficulty finding finials for the planters so I used some wooden turned eggs that I already had from my collection of pyrography blanks.
I can't wait for my next project now which will be a little more ambitious. I absolutely love Ana's website and can't wait to see what else I can make.
We had an oak armoire for our television and we needed to find something that fit our new 50" tv, an unexpected gift from my brother in law. This was perfect for the size we needed and the small space we had to put the tv.
I liked the idea and my wife loved the outcome. Thanks Ana.
We have started a 501 C-3 non-profit manufacturing company making furniture and giving all the proceeds to Foster Care Youths "aging"out" of Foster Care. Foster Care kids are trained on basic woodworking and carpentry skills and assist with the furniture manufacturing.
We are using Ana White's classic Adirondack chair design for our first project, and they are beautiful.
For more info see our website at www.fostercarefurniture.com
Thanks Ana for helping these kids!
Fri, 03/03/2023 - 11:50
This is so awesome, I will go check it out! Thank you for sharing and such a great way to help these individuals.
Since my daughter loves to climb and was starting to get a gleam in her eye when it was time to get up from her naps, the time had come to give her a big girl bed. I'm not ready for her to be in the twin bed that we have because it's so high off the ground, so the toddler farmhouse bed is perfect for her. We did have to edit the plans for our crib mattress
Thu, 11/17/2011 - 01:02
So sorry for the tech problems. I can't wait to see your toddler farmhouse bed! If you send me images I will upload to the post. Thank you so much for taking your time to submit a brag post. Ana
Knockoffwood(at)gmail.com
Sun, 04/14/2013 - 12:19
I've been looking to make a toddler bed for a friend and this is the perfect one. I like the headboard without the arch and I too need to be able to fit a crib mattress in it. Would you happen to have the dimensions that are needed for it to fit a crib mattress?
Found these plans for the dog crate and decided to build one for my large Rottweiler. It's large and tall enough for him to stand in (29"W x 41"L x 32.5"H). It didn't take long to cut and put all the pieces together, the longest part was staining the top and putting the urethane coating on it. The cost was really reasonable, I purchased the wood, used paint and stain I already had from previous projects. I plan on building more projects soon.
Mon, 12/09/2013 - 03:22
I would like to build the X large kennel for my dog.
is it possible to have the measurements for the X large version.
the large version is not big enough for my sweetie.
thank you so much
Mon, 12/09/2013 - 03:22
I would like to build the X large kennel for my dog.
is it possible to have the measurements for the X large version.
the large version is not big enough for my sweetie.
thank you so much
Wed, 04/02/2014 - 11:00
I want to build this for my Great Dane mix.. your dimensions would seem to fit the bill.. any chance you have a cut list handy?
First time major project. My wife wanted a kitchen table. Did tons of research to find the plans I wanted, which is a modified version of the plans on http://image.ana-white.com/2012/05/pottery-barn-benchwright-farmhouse-d… .
Breadbox ends was changed to a tounge and grove ends with wooden dowels as anchors to hold the ends.
Finished with Natural Danish oil, and polyurethane topcoat.
Thanks for Nathan1342 for the advise in getting started.
Here is a table I made for a friend. 27.5’’ wide x 78’’ long x 36’’ high. It was custom made for the dimensions he needed to fit in his condo. I used pine boards and legs from Lowes, and Bleached Blue stain. Then put 3 coats of lacquer on it.
Comments
Ana White Admin
Thu, 02/16/2023 - 12:08
Great solultion!
Thanks for sharing:) Nice work and looks great too!