Community Brag Posts

My Husband and I built this for our son's 2nd Birthday. This is our first finished project!
We drilled 1/2" holes for play nails and screws in the legs and top. We also modified the bottom to have a shelf for added storage, just measured the inside dimensions and cut to fit. We also opted for a peg board on the back to eventually hang tools and some baskets for the nails and screws. The peg board is attached to the base and trim with glue and staples. We taped off a section on the back before using the polyshade to allow the glue to adhere.

I made this longer using two 8’ 1x4 pine boards and added a center brace inside. I added a pack of simple hinges to the top so that the face could flip up and we could access the inside. I also routed the face and back.

I have built this console quite a few times. Always trying different finishes. Love all of them. Have to say I always skip the X on the sides, I just get lazy towards the end :) Im in the process of building a couple more, will try to add the X to it this time...we will see :)

We love this little desk for my 3-year-old's room.  She chose the light blue color and helped me paint it.  We used Valspar chalk paint and wax and love the look.  We didn't have room for the double-sided storage so we used pre-made table legs for the other side.  Thanks again, Ana!

p.s. Sorry about the photos rotation.  I have no idea why they are all sideways.  

Substituted the galvanized pipes for heavy grade (Type M) copper pipes for a prettier, warmer look (I'm obessed with copper accents!) 

So happy to have found these plans, and proud of how it turned out! It was even better than what I was hoping/looking to build. (I can't stop staring at it! :) It looks like I paid over $1000 at some high end furniture store like West Elm, but managed to make it for under $200!!!

Thanks Ana White for these plans and all of the others on your site. You have shown both me and my 65 year old mother the confidence and joy of woodworking! (And saved us a lot of money, too!)

We let my son choose whether he wanted a modern store bought play market or whether he wanted help Mommy and Padre (my dad) build one for his 3rd birthday present. We used magnetic primer so he can change the name whenever he wants and added some trim and some tea towel curtains! He loves it!

My spin on the rustic table. Used staircase spindles for legs, cut the side boards to accommodate. Rest of plan was pretty much the same. Wife wanted a big table, thats what she got.

This was such a fun project!! Kudos to Ana White for a great design!! We made several changes, including the dimensions; 10ft X 42-43 in (left the outside edge raw.  Table top is 1.5" thick American Walnut with a semi gloss clear poly, and the base is milled 1.5" thick poplar, stained dark walnut.  The pedestals also have threaded rods vertically drilled through the center beams (one top and one bottom) and used 3/4" dowels sunk into the base and riser for added structural stability.  Finally, the mortise and tenon runner on bottom used dowels to hold it in place and the top is removable using my own fabricated wooden cleats to attach the top in an old style removable way.  All in all; although this was certainly not the cheapest (about $1,500 all things considered) or simple (although comparable materials and craftsmanship would cost about 3x what I spent); this table is bullet proof and beautiful!! Thanks for the inspiration Ana!!!

This was my first shot a farmhouse table. It was pretty easy to make overall. Frame and tabletop were put together mostly with dowels and wood glue but I put a few pocket screws and corner braces in for extra support. I also added a decorative trim board to the sides, which I put on the face of 2x3s. The tabletop is four 2x10s and two 2x6s for the ends. The stain is a dark Expresso color and I coated with polyurethane. The legs were bought from Lowes at a reasonable price since I lack the tooling and know-how for a lathe. 

The benches were exactly the same except I used two 2x6s for the tops. 

I had been eying the IKEA Expedit 4-cube bookcase and figured I could build it for cheaper and have lots of leftover plywood for some other projects. I was right!

I built this shelf for my mudroom. I modified this plan to fit my space, it is 36 inches wide. I also used 3 - 1x3" pine boards for the top. Love this plan so much that I've made two more to give away as gifts!

Great console table.

Great project and fun to do. I've actually made 6 tables off this same plan, all different sizes,from 4ft. To 8ft.. 

I made a few changes to the Farmhouse Bench plans as I wanted to match the design of the table. Most notably, I lengthened the seat boards to replace the breadboard end caps. This made my total length 67″, the perfect size to fit under the table if needed. The width was changed to 15″ and the height remained 18″.

We haven't had bed frame since we moved from Florida and as we now have our own home, it was time to get one. My friend gave me headboard they had no use, so I just had to build rest of a frame.
Notice that we are middle of the hole house renovation so we have no trims, walls are lacking paint etc :) I still need to make night stands and closet for us :) Let see how they come out.

Follow our projects and life middle of the mountains in my blog :)

http://ourleaningtree.wordpress.com/diy/bed-frame/

This project took me a little longer to finish but I'm happy with the results.  I used the plans to establish the size and carcass, but changed up the style on the inside by putting a shelf on one side and drawers and glass/wine holders on the other.  For wood I used 3/4" Maple plywood and common board pine.  The color is minwax Jacobean and for protection I applied wipe on poly satin finish.  This gave it a nice hand rub look.