Community Brag Posts

I used the Rustic Coffee Table Plans from ana-white.com, but purchased lift top hinges and added 2" x 6" around the perimeter, which provided storage inside when the top is lifted.

We built this corner cabinet shelf in three days (only because it is over 100 degrees here, so we had to wait until 9:00 at night to work on it) for our office space. We love, love, love it and can't believe how nice my corner cabinet turned out. Only our second building project ever. :)

We needed a desk for my kid's computer. Something simple and functional but with a little customization.

Since we live in Hawaii ocean themes are everywhere in our home. I scrolled out the waves to make the shelf supports original and let light into the little cubby below.

24" across and 18" deep I built this off the rough plans for the Clara desk and customized it to be at a normal table height of 29" so my elementary school children will be able to use this all the way through high school.

Stained with a blue minwax wood stain on the legs and shelf support. Arctic white latex paint for the table and shelf tops.

My under the sink door cabinet is smaller than what's on the plan so i had to improvise.  A paper towel dispenser won't fit anymore so I just made another shelf.  I love it.  No clutter and everything is so organized. :) 

Thank you for these plans - they were great for a first time build. Definitley learned a lot building this...and now on to the next project!

Our kitchen table buggered out so I decided to give making one a try. This was my first project. With seriously low funds available- I asked around to family for scrap lumber. Turns out the old lumber in the barn was black walnut! I had to plane and join it by hand so it took quite a bit longer to make.
I made the table one foot shorter and one foot wider. It seats 6 comfortably on the sides. Thank you so much for the plans!

This was my first major DIY build and I LOVED the way it turned out! I have wanted a large office desk for quite awhile, but never could find anything in a store that fit my needs and/or style. I modified the plans to fit what I wanted and it turned out great! The top is just a hollow-core door from Lowes ($19) that I stained with a Dark Walnut color. I added a file drawer to the right and just a hinged pull-down door on the left for more hidden storage. Purchased the baskets at Michael's for 50% off.

After I built the dresser for my son, he decided he needed a nightstand. This was his project, I only advised and offered assistance. He was 15 and he came up with the design and we glued up the panels. He cut, sanded and assembled himself. He stained and applied the shellac. I am very proud of him.

Great project!

It took me a long time to finish the chairs, although the table was a snap. The time consuming thing was my desire for two paint colors. Painting is not my strong suit. But I got it done, just in time for our annual Labor Day house party.
I cut the lumber using our radial arm saw. I sanded with an random orbital sander, and used really great cordless drill and driver. My husband likes to buy good tools, but hardly ever uses them.
I had never used pocket screws before: I love them and found it very necessary to use the face clamp and right angle clamp Kreg sells to prevent splitting. My assortment of speedclamps were not getting the job done.
For the table, I tried masking off the white when I painted the red on the legs, which did not go so well as there was annoying paint-creep under the tape. I also decided that the red paint needed two coats to look good (it actually seemed to do better on bare wood then on primed wood.) So that took more time.
I finally bought a really good paint brush and that made a huge and positive difference.
I had intended to paint the chairs' slats red, but the back frame white, and the side supports red. To do this I intended to paint individual pieces and assemble the painted pieces, but the splitting (before I invested in the specialized clamps) was heartbreaking after all the sanding and painting. So I took a month off from the project, ordered clamps, recut a few pieces, and simplified my paint scheme. Much better!
I'm looking forward to starting my next project (NO paint!)

I started about 2 years ago by making one of the Mini Farmhouse Style bedside tables.  My wife loved it so I made a second.  Then I made the bench a year or so ago with plans from this site too.  Unfortunately I can't find where those plans are now.  Maybe in Ana's book (I have that at home too)? I just finished the Reclaimed Wood Headboard with wood I reclaimed from the big orange store :)
I put a 1/4" chamfer on the edges of the panels for the headboard, and had to add a brace in the back because none of them were perfectly flat.  No one has seen the headboard yet, but I've had friends ask me where I bought the bedside tables and bench.  I've never had a matched set before.  This is a definite bedroom upgrade!
Stain is Minwax Special Walnut, paint is Gotham Grey from Behr.

Modified to Full sized, my first bed!

Really simple and quick plan, great for a first timer. I oughta know. This was the first piece of wooden furniture I've ever built. Thank you so much Ana!

I made a version of this crate for the top of my family's refrigerator. I didn't have enough scrap 1x3s, so I used 1x2s as well. Instead of using chalkboard paint, I stained the 1/4" front and painted "nourish" with white paint. I also used old drawer pulls I saved instead of cutting out handles.

Loosely based on the small cedar fence picket storage shed plan, this was my first attempt at making a storage unit with a roof. There was only one unplanned trip to the store (to replace two 2x4's that I cut to the wrong length). Pro tip: "measure twice, cut once" doesn't work if you measure the wrong length twice. Also almost lost two fingertips because I'm an idiot and forgot the most basic of safety rules for power tools, namely the "don't put your fingers near the blade of a circular saw when it's in use" rule. Very lucky to only come out of it with a good scare and some wounds that will heal without permanent damage. 

Changing table built for my first grandchild!