Community Brag Posts

This is my first Ana White project. It was so fun to do and turned out really well. Thanks so much Ana for your great plans and help with building them. the Kreg jig is great!

My son loves rocketships so this was a nobrainer.  I made it a bit taller than the plans called for, it's about 6 1/2 feet tall.  It should hold all of my son's books and then some!

I came across this plan and decided to make a chair for our patio from some wood that I happened to have in the garage. Well, people saw the chair and just had to have one.  I've made 10 so far. 

People passing on the street would see me working on them and stop to ask of they could order one!   

Organization is a constant struggle in our house and our junk drawer became more of a place to stick things when you didn't want them on the countertop than an actual funtional part of the kitchen. That won't change with the addition of the organizer, but it was nice to have it cleaned out.

In total, this only cost about $12 (for 3 drawers) and that was only because I used the S4S wood. My HD didn't carry 1x3 in anything else. May have been for the best because now I didn't have to sand anything.

The lesson learned from this project was that I should have cut everything to size instead of relying on the measurements of the drawer. The silverware drawer wasn't perfect and I will likely redo a little of it because the junk drawer turned out great.

This was my first project using designs from Ana White, and I am really pleased with how it's turned out. My son loves it! There were a few small errors but it was always going to be a learning curve and the good thing with wood is you can hide most errors. Using the pocket hole system was new to me, as it's not that big over here in the U.K but its a great system if joining wood. Also over here we tend to use different measurements and we pay a lot more for wood. I am looking forward to building more projects if the wife lets me ;) 

Great project we did for a local customer. Super happy with the way it came out, and the contrast between the brown top and white base. Making the inset shelf a different color provided an additional later of difficulty, but the result is worth it.

This is one of the first furniture projects ive done in 2 years. A finished picture will be up later on. I painted this project because the customer wanted it painted not a big fan of paint but what they want the get.

As my husband and I were slowly piecing this shelf together, I began to worry if it was going to end up rather unattractive. Turns out I had no need to worry and the completed project was better than I had imagined! It's extremely sturdy and a good size (I actually brought down the width a notch). I painted the shelves and supports separately which turned out to be an excellent idea.

I followed the plans exactly except I made the legs 5 inches taller to allow more room on the bottom shelf. this was my first project with doors and drawers and my third big project after building a chicken coop and the Ana White triple pedestal table. I couldn't find 2x2s so I stripped 2x4s (the dimensions aren't exactly the same but close enough). Took me longer to build than it would most people because I'm not that experienced.

This was sooo easy for a first timer like myself. Followed Anna's plan. Learned as I went. Customized a little...started with the end panel..could only fit it cut in sections in car from store, so decided to separate the sections and open it up a little with a peek a boo window. Used a little unsanded grout in my paint choice so that my son can doodle some art on the panels with his chalk. Added some support boards on lower corners for extra support...also used the Long L brackets as bed rails to support the slats. Make sure you get enough wood to cut the vertical side of ladder as the plans didn't include it. Cost about $100 without the mattress. Very happy with it. Thanks Ana!

first project ever, made a few alterations to both plans and came up with this.

For our small 1960's Master bedroom, I needed more storage for under-the-bed totes. When we were all done, I made a bedskirt with the needed drop-length to hide all of the totes.

This is the Rustic X Bench featured in Ana's Book, The Handbuilt Home.

This was the first table we built.

I build these basically with leftovers from our new fence.  The coffee table is 4x4 post legs with a 2x4 frame attached underneath.  For stability, I used a 12" wide scrap of 3/4" plywood on the top before attaching fence pickets.  Old tags were used on both sides and ends.  The (two) end tables were 2x4 legs with 1x4 side trim pieces, but without the plywood stabilizer, and a single cut down picket for the top.

I'm not a writer, and English was my worst subject. So don't hold any grammatical errors against me.

This was a project that I built this past weekend. It's a set of child size adirondack chairs. The toughest part was the weather. It was too cold outside to paint, so I had to paint and assemble these in my living room. My two year old daughter kept trying to sit in them before the paint had an opportunity to dry.