Community Brag Posts

I built this dollhouse for my daughter's sixth birthday. It was a great experience and my first time using a KregJig. I ventured from the plans a bit and built cantilevered staircase with dollar store Jenga-type blocks.

I got so inspired by Ana White I just assumed I can make anything just like her :D
But deep inside I knew, I wasn't nearly as good as her :(

So when we needed a bar table of definite length and height and type and color and way out of our budget, I thought to myself "hey girl! you can do this ;)"

So I came up with this super easy plan.
You can read all about it from the link below

http://tinyurl.com/pkntwa9

Built from the

Farmhouse Table - Updated Pocket Hole Plans.  I used pine for all the wood, painted the bottom with white

Valspar Storm Coat, and table top with Miniwax Red Mahogany stain. 

It's not purfect but, it turned out great.

Lessons learned

I need is a planer to make the boards straight, Belt sanding took a long time.

A media cabinet made from Curly Maple. Used biscuit joints for the corners, and face-frame for the fronts. Sliding glass doors riding on fiber glass rods. And glass shelves too (except on in the middle)

This is an antique oak dresser I recently purchased. I had some rebuilding to do. I replaced the bottom and fixed/rebuilt the dovetail drawers. I did replace the veneer on the top two drawers. It isn't a difficult task. Just ask and I will explain the process. I do wish though that I had gone online and purchased some quarter sawn oak veneer. It would have matched better than what I purchased from a local home improvement store. I replaced all of the hardware. I purchased it from Kennedy's online. The hardware finish is called aged brass. If you have solid brass hardware you can purchase a "brass ager" quite cheaply. There was a mirror attached to the dresser at some time. I am going to build a mirror to match that I will hang on the wall above. I am also looking to build a back splash for the back of the dresser. I think I may purchase an antique oak pediment (decorative door header) to make the back splash from.

I built the table to fit my space and made a few changes!

This was our first attempt at making furniture and even though the difficulty rating was ‘intermediate’, the detailed instructions made the process less complicated. Our version of Anna White Essential Entryway Bench turned out better than we expected! Once it was built, I stained it grey, painted it white, then distressed it to make it look antique. I added a custom made foam cushion to the top and, voila!

TammyA

This is my second build. I used the Benchright plan but had to modify it for one drawer. The Dimensions are 39 long, 25 wide, and 19 tall. I have heard others comment on how difficult drawers are. I thought I would just jump in head first with the kind of drawer that closes flush with the rest of the table - really had some trouble with making it square. I ended up shimming the face onto to the drawer because even though it opens and closes smoothly, it isn't square with the rest of the table...

I had originally planned to make the 20 second tidy up table for my living room and begun purchasing materials. However, I was let go from my job last Sunday, so changed my plans. I took inventory of all the supplies and materials I had on hand and tried to find a plan that would not require any more spending to build... to sell... to pay rent.... and thus the new table was born. And I love it. And I hate to sell it.

I tried to copy the finish on the 20 second tidy up table, and this is how it ended up. I used Minwax Golden Pecan for the base color and Red Oak for the accent color. The colors got a little blended together through the staining process. I really love how it turned out though because it's a nice warm color. The only thing I don't like is the grain in the pine didn't take much if any color, so it's still a bit yellow, which seems slightly out of place when I look at it. I think it will darken with age and look a little better. Otherwise, this was a super fun project!!

The first of hopefully many more projects to come!

This is the second bench made from these plans. For this bench, I altered the plans, decreasing the length from 55" to 36". I'm a little uneasy about using the jigsaw so I did not taper the legs. I love this bench it fits very nicely into our  warehouse loft apartment.

Fire truck bed by Ben

I’ve wanted a new island for awhile but wasn’t quite sure what I wanted it to look like, until I saw Ana’s cabinet plans for the Momplex kitchen! We wanted a fairly large island, so we did two 24” base cabinets “townhouse style” (from Ana’s Kitchen Cabinet Base 101 post) plus we added a little extra space at both ends, so Hubby could install some electrical outlets and we’d still have plenty of room for the drawers. The old island had power already, so he got the outlets wired pretty fast. Behind the doors are some deep pull-out drawers to hold all the stuff you’d usually have to bend down and reach for. Now it’s so convenient! I built a Farmhouse Table top for it and love it! We built flat doors and trimmed them up to match the island sides and back (also matches our pantry and dining room). This project took us about 40 hours to build and finish, and it was so worth it! Ana, you are a rockstar in our house! We now have a real showpiece for our kitchen, thanks to Ana White!

Using the Camp Loft Bed design. I modified for TWIN XL and created it to be taller so my son can grow with it. He has about 6 inches of clearance from his head. Also changed the angle of the steps but going back to the original design since space requirements are no longer consideration. I also used metal brackets to tie in the railing. The desk was built from Kreg Jig website.

Great plan, taught me a few things about glue and stain! Corrected by sanding again and re-staining the spots.

Fabulous home gym by Nailgun Nelly!

*Incorporated and modified the grand waterfall console plan

We made this table that seats 8. I loved the farmhouse table but we needed something that did not have cracks for food to seep into with 4 you kids this was a requirements. Much playing around with idea we made this table with out of Cedar 2x6's and a kreg Jig. The white spot is just extra poly we are filling a hole with. I did not want to use any wood filler We love it. We used legs I found on a old rusted table. In which I sanded them down and refinished them. The chairs we also found in the old storage shed on our property. We cleaned them up and painted them black. We do plan to make matching benches for the table.

I decided to dress it up a bit using oak for the surfaces. I then used Provincial stain by Minwax and semigloss poly. The legs/skirt are clear pine and both primed and painted. Rather than screw the seat to the frame from above, I used Kreg joints and secured it from below giving the chairs a smooth final finish.