Corona square coffee table
Corona Square Coffee Table.
Corona Square Coffee Table.
A friend showed me a picture of a coffee table and asked if I'd build her one. It was very similar to this plan and she loved it, so I gave it a go. I had my table top boards run through a thickness planer and a jointer before assembling. The table top is attached to the base with "z" clips which will allow the wood to expand if needed. The "X's" on the side gave me a little trouble but that's likely because I tend to be a bit of a perfectionist and I needed them to be "just so". ;)
I was happy with the finished piece and my friend was thrilled. :)
I first saw this headboard on Ana White's Instagram and loved the idea! I took a screen shot so I would remember it later. One day my daughter was flipping through the photos on my phone and saw this screen shot. We were about to move to a new house and she wanted me to make this headboard for her new room. She is 11 years old and loves to play games on her laptop with her friends so this was perfect for her. Within a month of moving into the new house I started to build this piece. It took me a couple weeks to finish since I have three kids and was also trying to unpack our entire house but I love the finished product! My daughter really loves it too!
This is my 4th project. I love it! I used 2x6's on the top instead of 1x6's as I wanted a more substantial look. I also added some bunn feet by attaching a couple of 2x4's to the base and drilling the bun feet into them. All the game consoles and dvd players will go in the top slots so they'll be much more organized than what they are now.
Sat, 02/18/2012 - 08:20
That turned out amazingly beautiful! I love the heft of the 2" thick top.
Sat, 03/10/2012 - 18:32
I was just wondering if you used 1/4 ply or 3/4 ply for the foe faces? I love the look of the stained console.
I utilized your toddler play stove plans- these are easy to use instructions! Thanks much!
Wed, 12/25/2013 - 04:46
This is darling! You did a wonderful job!
Merry Christmas!
Tips on building the Home Depot Adirondack chair.
This piece was one I recently created for a customer using the plans provided in the Queen Storage Bed with Drawers from Anna's site. It was created using 3/4" birch plywood and 3/4" pine common board.
I chose to cut dado's when building the boxes for stability's sake. I was able to leave out much of the construction screws by using strong, but relativity simple joinery techniques with dado's and rabbets.
The piece's drawer fronts were then veneered with pallet wood to lay flush with the drawer faces, and hardware installed on top of that. The headboard and footboard were both then stained using a Varathane, Minwax (water-based), and General Finishes to create the various tones in the pallet veneer to create a complimentary uniform look to the drawer faces.
The other variation in this bed was that I used Threaded inserts and hex bolts so that the head and footboard could be removed multiple times for transport without damaging screw holes.
Built the nested grill station just in time for the 4th. So much fun building this, thanks Ana so much for the inspiration! Chris
Cost about $100 and took about 6 hours total (one person). I ended up using a polyshade color I had in the garage -- but I wish I would have just used regular stain or paint. I'll likely repaint it in a bit, the polyshades just doesn't cover well (but that's what I get for trying to use leftovers!) One of my top pieces ended up being a little short (I accidentally cut it with the original cut pieces). It looks REALLY great though, and I'm likely the only one who would notice. My husband is super impressed! Thanks, Ana!
Simple coffee table. took about 3 hours to build.
Console table build.
Turned out great! Problem with the plans: written instructions for legs say 35 degree angle but the diagram shows 40 degree angle. Which one should it be?
"Couldn't find a corner hutch that I liked so I decided to make my own and OMG I'M IN LOVE"
Jimi Hightower
I LOVE how this bench turned out. I made it for my sister and her very large family. She paired it with an very old table that was found in the family "barn" and some chairs that she had purchased separate.
I have to say that I ADORE your site and plans!!! You are my hero.....and I want to build literally EVERYTHING on here!! Thanks SO Much :-)
I was tired of not having a place to hang the Christmas stockings. With no fireplace and no mantel in our 1960's ranch home, I decided to build one myself! It turned out to be one of the easiest projects I've done.
I had Home Depot cut all of the wood for me, so once I got home, I just had to nail it together. The actual building of the mantel took about an hour. Including the sanding, caulking, and painting, it took about four hours total. I also added a piece of faux brick paneling to the back of the mantel.
I made a "fire" using some river rocks and small limbs. I placed them in a circle and added string lights for the "fire" effect.
For more pictures, check out http://deepestoceanblue.com/diy-mantel-and-fake-fire/
Rustic barn door sliding console.
My husband followed these user-friendly DIY platform bed plans and was able to build and finish our son's big boy bed in 2 days. We used poplar wood for the headboard and pine for the frame. We are so in love with the results! Thanks, Ana, for sharing these awesome plans with the world!
Raised planter with water hose.
My husband built this from your storage locker plans only complaint was the 1 1/4 screws werent long enough we had to go up to 1 1/2" but after that sucess! we decided to antique paint it, Im so in love with this peice, honest opinions accepted lol i know we each have our own style and im open to tips!
Sun, 03/11/2012 - 13:44
first i sanded it so it would have a nice adhesion. I did a "ruff coat" of brown paint, i mean ruff! lol i painted on where it would have certainly needed 2/3 coats to fully cover, but made it was enough to make the dark brown i wanted, after that dried i again ruff painted a green (salamander to be exact) coat ,(you could still see the brown) i took the orbital sander and 220 grit sand paper to age the locker, i literally resanded the whole thing and worked it a littler harder where i have the "damaged" places. the best part is you really cant mess up!,after i finished the sanding i cleaned it so i was able to put a glaze on it to "age" the paint i bought mocha transparent glaze by valspar it was about $16 but only used 1/2 - 2/3 of the jar......another project stash of leftovers:). I glazed in sections With the glaze i brushed it on the whole side and before i moved on to the next piece i wiped it to prevent it becoming to "finished", on the insides i brushed the glaze on two pieces (say one wall and the bench of that locker) and wiped the first on then the other part and then moved on. Overall i was looking to make a piece that you would find at grandmas old farm house we are super happy with the out come honestly the pictures arent as good as it came out! Good luck and happy building:)
I used some flashings from Lee Valley to make these rustic tables really pop. The corners and the big brad nails really make them pop! These are also STURDY pieces of furniture as the Monster Husband has stood on them both without a wobble.
Wed, 09/23/2015 - 09:07
I know this post was awhile ago, but I am looking to create somthing similar. Where were you able to find a white oil based stain? I have called all of my local hardware stores and they all carry just water base? Did you put the dark mix stains on then, go over with white water base stain? Any clarification or assistance would be great! Thanks.