Community Brag Posts

I love how this table turned out. The plans were simple and easy to follow. I chose to distress the table to give it some character i found a great video on youtube for different distressing techniques here http://www.youtube.com/watch?v=4Iotye7dvAQ For the finish i used the tea and vingegar method then to make it darker i rubbed on a little oil based stain and finished it with polyurethane.

This was my first ever project! I built the skyscraper bookcase and then built a second one, only modifying it to make a locker style cabinet for backpacks!

So glad I found these plans! I couldn't bring myself to spend $200 on the commercial ones. I built this for my 17-month old daughter since she always wants to be in the kitchen with me but always ends up under-foot. This gives her a safe place to be contained and up high so she can see what I'm doing. I don't have a jigsaw so no curved top or anti-tip feet for us but I wanted it straight anyway so that it would slide neatly under the counter over-hang. I did round off the ends of the anti-tip with the sander. I also shortened the height to 34 inches; all other measurements are as instructed.

I had to do my cutting in the garage during naptime since she always has to be where I am. Same with the drilling. So this project spanned several days but altogether did not take too long at all. I used 2-1/2'' screws instead of attempting pocket screws - I have a mini Kreg jig but after reading the comments and other people's pictures, I decided I didn't want to risk splitting the wood and having to make another trip to Lowe's with the toddler.

I assembled the ladder-rung sides & platform pieces then gave everything a once-over with my orbital sander before handing it over to my husband for staining (he enjoys it - it gives me a headache). After 3 coats, he did a final "sand" with fine steel wool which left a super smooth surface. I finished the assembly with the 1-1/2 narrow hinges - USE CLAMPS! 

Build straight from Ana's plans. Very easy and quick to build. I spent a little longer sanding it a lot. I then just stained it and put two coats of urethane on it.

Super excited for my new media cabinet!  I painted my cupboard doors white and added L brackets on the inside of the doors for support.  I had never worked with crown molding before so this was a great starter project on how to cut crown.  My cost was kept down by using supplies such as paint and hardware that I already had. 

This was mine and my wife's very first woodworking project. Overall, it wasn't bad at all. I thoroughly enjoyed the actual process of cutting the wood and putting everything together. As far as the painting goes, I'd much rather just go on to another woodworking project, but I have to say that all the hard work paid off. Anna's plans helped tremendously. I tweaked slightly just because we wanted our center piece to be a little taller and slightly more narrow. We also added two shelves on each side, for a total of four. For our small reach-in closet, this was by far the best way to go about everything. We definitely have much more room and overall it is a much better use of the space.

I threw in a "before" picture just for fun.

We also just finished the Farmhouse Queen Bed that Anna has plans for, and we will be putting up a brag post on it very shortly.

I modified it slightly by leaving off the trim around the perimeter. I also shortened the table to 84" which then only required 2 legs for a custom fit for the mom space. The finish was distressed to conceal heavy use (more like spills :-D) from kids which turned out to be a home run with moms

Check out some tips during my build @ charitybuilds

Made the planter boxes. Very easy and the stain makes them look great.

Modified wide cabin dresser with metal full extension drawer slides on the bottom of the drawers. The extra set of drawers on the bottom were added to give more space for storage.

We built this out of solid Maple for my son's 30th birthday. He has a full-size bed, so we had to adapt the queen size plans. It turned out great....he was thrilled...but it was heavy to carry upstairs to his apartment!

This was my first attempt at furnature. I didnt use the best quality wood, and had a hard time finding straight boards at my local Lowes.

My husband and I are doing a bit of remodeling in our 150+ year old farmhouse - over time we have amassed a not so small pile of old lumber. We hated to see it go to waste so it has been our hobby to try to find ways to reuse. Small projects. Finding this website was a dream. My husband and I are NOT natural carpenters but the plans we found here were perfect for us. Clear, simple, un-intimidating. I've been meaning to make the Library Console Table for a while and before the weather got too yucky to work outside I knew I had to get to it. It cost us zero to make, however, since it is all old barnwood - no two pieces were alike, the wood was a bit warped, dinged and splintery. But with enough sanding and the right paint I think this will be adorable. Husband does not want me to paint it and I might not have but we were forced to use some plywood (we also had a small sheet on hand) and I hate plywood too much to leave it exposed. We'll see.

We recently moved to across country and couldn't fit all our belongings in our moving van so I am on a slow but steady quest to my own "hand built home"! While my husband works with his computer genius types, I am pulling out my tools......rather basic and simple tools because none of my good ones fit in the truck either!