My version of X Console Table
A friend wanted a tatty old chest freezer turning into a traditional looking ice cream cart for her business. The freezer itself was way to heavy and not really fit for purpose but, after a week of tinkering about with a couple of design changes here and there to accommodate the weight, I don't think I've done too bad a job.
The internal frame is Nordic fir, half lapped at the joints and secured in place with 38mm oak dowels, the cladding is 6mm birch ply finished with paint from the French chic Al fresco range, the writing proved a little challenging on the the eyes and my hands aren't as steady as they used to be but she's happy.
This table was built using the plans for the "Simple, Cheap and Easy Console Table". I adjusted the size (made it shorter and wider) and added shelves. I made it with oak, so it wasn't cheap, but it goes better with the rest of our furniture.
Outdoor sectional made using Georgia M's 2x4 modifications. Found some nice studs at Home Depot that worked great. Filled in any knot holes with stainable wood filler, and after sanding they looked like much more expensive lumber. Used Kreg 2.5" blue-coat outdoor screws and chestnut brown decking stain. Cushions are from Wal-Mart online clearance... Went to find the link, but they're all sold out. Looks like I lucked out!
I built this in my studio/loft apartment. Great beginner weekend project. My first of many.
I saw the Ana White Farmhouse king bed and used it as inspiration. I made a few modifications and adjusted the measurements to fit a queen bed.
Thanks for the inspiration!
The first furniture I built all by myself without my husband. Makes my kid's room so much cleaner without all the books on the floor
I built two modified kentwood bookcases to replace some old worn out shelves. To fit the space, I increased the width to 1 metre each, and reinforced each shelf for strength.
Made with 1X6 pine. Stained with Minwax Classic Grey, tree is latex white paint I had, and birds are chalk paint that I already had in my supplies.
Used the plans from here and the plans for the sliding door hardware to create this for my wife for Christmas.
Top is 2x10 KD spuce. Finish is Varathane cherry stain and Varathane semi-gloss poly. This was my first intermediate project. Learned a lot.
I loved the square modern farmhouse table when I saw it, and knew I wanted to use it as an end table in our living room. I had this really awkward space that my couches created when their corners met. It had been filled by 4 TV trays acting as a larger end table--all I did was cover it with a table cloth to disguise what it really was! ;)
I have a coffee table that is similar looking (with a slated top) so I knew it would compliment it! I may still go back and repaint it to something a little more colorful or to make the white more crisp, but overall I love it!
The table is very heavy and sturdy! At the time I built this, I was under the impression our local Home Depot didn't carry pine boards, so I bought Douglas Fir instead (turns out they do carry pine, they just have it in a different section). Definitely increased the cost a bit, but I have no regrets.
It took me about a week to put together, but I also work outside the home. Had I had a whole weekend to devote to it, I think it would have been done in one or two days.
This is an outdoor seating arrangement that we came up with by looking at your website. We had to adjust the size to fit our deck. But once again without your website this would not have been possible.
Modified corner cupboard to use as corner bookshelf in boys room. Omitted the lower doors otherwise shelf cut to specs. Painted with bold blue to match boys colors.
I made this for my daughter this year for Christmas. I’m pretty proud of how it turned out.
Wed, 12/22/2021 - 17:59
Thank you for sharing, wonderful job and a gift that will be cherished for years to come!
My husband and I finished our first project together. It was odd having him around in the garage, but I tried to not freak out too bad. He was so excited, until we were about three hours into sanding. Little did he know, that I would be sanding all week long. He spent the rest of the time busy after that. :)
The project went smoothly. I think that the headboard is a little low even after I lowered the bed frame by removing the wheels. I am going to need to build leg extension, but will just enjoy the headboard for a while as is.
You can find more photos on my blog.
Recycled raised herb garden. Simply removed all the innards of an old grill I was going to throw away. Once it was gutted I pressured washed it and touch up the paint. Then I built a simple cedar box and placed it inside. Wa-la added basil, parsley and oregano.
Took different plans from this site and combined them to make this princess castle for my daughter.
ana here is a picture of a solid hickory blanket chest i made my younger brother the chest is made from 1x8 hickory i used walnut and aromatic cedar trim and for the side trim i used elm the chest features in the top hickory red oak walnut and white oak with walnut side trim and the front of the chest features exotic hard to find mexican bocote lumber i i built the whole chest using plugged kreg screw construction and i used aromatic cedar for the floor and for the finish i used minwax antique oil finish 3 coats this is by far my most 2nd favorite project to come out of my shop over my 20 plus yrs woodworking not bad for simple tools a humble shop and a outdoor rated cord for power hope you enjoy let me know your thoughts n i would be glad to share more pics of my work
