Community Brag Posts

Great, fun project. Only used a Kreg jig, Skill Saw and Sander. Super easy.

This is a 5x5ft square farmhouse table that I built for my dining room. It's all kiln dried construction lumber. I bought a thickness planer to get this right. I got tired of the twists in the boards that made it impossible to get the table top flat and consistent. It's completely worth it. I cut all the boards down from 2x12 lumber to 10 inch width. I routered the edge of each plank with 1/8 bit to give it a small crack in between the planks. I sprayed the new varathane poly, water-based, and it came out perfect. I ended up with 4 coats.

We loved the Tryde coffee table, but thought a more industrial look would fit better in our apartment. We saw some black iron pipes at Home Depot and decided to use these for the legs. It turned out great and looks really good with the rest of the furniture! Thanks for the plan!

So my sister's house is on a rural, sandy lot. Did I mention sand...lots of sand. Her tile doesn't react well to sand-covered shoes , so they needed a place for guests to take off street shoes to replace them with spa booties. I offered to build them a storage bench for that purpose.
I modified the bench to make it shorter as per my sister's request. She also wanted the lower shelf modified to place a boot tray on it to catch the sand. I suggested replacing the lower shelf with rails to place the shoes on so the sand could fall off onto the boot tray. We nailed finish nails into the legs under the rails and slid the tray onto them. Now she can remove the tray easily to dispose of the...sand.
The finish on the body matches the mirror, which hangs above it. The lid of the bench was stained to match the finish on the doors, posts, etc. I used wrap around inset hinges from here: http://www.rocklerpro.com/product.cfm?page=5135&rrt=1
I checked this as a weekend project because of dry time for stain and poly.
Thank you, ANA for the awesome plans.

The goal of this project was to create a buffet / serving table to compliment the large farmhouse table I made a while back.   We have been using a folding table for a buffet line at large family gatherings and that just didnt seem right when placed next to the giant 10' table.  (info for the table: http://www.ana-white.com/2014/07/big-farmhouse-table)

The build is similar to the farmhouse table, but the materials are a bit smaller due to the size of the table.  The legs are 2x3's and the table top itself is made of 2x6's outlining a 2' x 5' section of tile. All of the other materials (stretchers and apron) are made from 1x3s.  The tile is set so it sits about 1/8" higher than the wood.  This is to allow hot pans and plates to be placed directly on the tile without a trivet or other separator.  The tile sets on a 3/4" piece of MDF supported by small 1x2 slats underneath.

All of the joinery is accomplished with glue and Kreg Jig / Screws. 

Total Cost $800

Our local Habitat for Humanity puts on an annual event where they get folks to restore discarded or worn down furniture and sell them at auction. My wife and I participated last year and this year I was asked to build 4 dog houses and then they were going to let local designers/decorators finish them out.

I figured it would be easy to find a good dog house plan, but I was wrong so I had to come up with my own designs. I did not want to use plywood becauase I wanted them to look good. So I used 1x4's and 1x6's. I built them all just a little bit different, but the same basic design on all 3. Since I am not very good with circular cuts, did not do any fancy 1/2 circle doorways!

There are "after" pictures on the Blog. Thanks for looking!

This was my first furniture build & the plans were a great help. Learned a lot along the way, made a few minor changes (1x4 on front of seat gives a little overhang) & had a lot of fun with the project. Our 2 kids are equally proud.

Made this for my granddaughter Reagan's American Girl doll.  I made the bed and my wife made the sheets and blanket and pillow.  Your plans were awesome!

Outdoor console using this plans, but reduced slightly in width

Me and my husband had only a hollywood frame forever and just never wanted to spend the money to buy one, then I found this website!! This is the first thing that I ever built I'm pretty proud of my self. Espically since I had the help of my one and two year old it took a little longer but i got it done.

This project was a true labor of love by a first timer. We are first time homeowners and built our home, which was completed spring of this year. Like most wives, I wanted all the bells and whistles in this home. The bells and whistles add up, and next thing you know, we're eating most of our meals on our granite island upgrade, instead of a new dining set. My husband took it upon himself to purchase tools off of Craigslist and research online for modern farm table plans. He came across Ana's site and loved how she broke everything down in her plans. This was the plan he used http://ana-white.com/2009/11/plan-modern-farmhouse-table-knock-off.html The cutting, sanding, and putting the table together took about four to five hours, but staining and waiting around made the project about twenty hours. Also, everything cost $50 on our end, whereas, the West Elm table I wanted is $700. I'm one happy lady, especially since I think our table looks way better than the one from West Elm. I'm excited to report that my husband is currently refurbishing chairs to go with this beautiful table! Thanks a million for your easy to comprehend plans, Ana. You're the best. Here is a post where I featured my favorite piece of furniture http://www.AnnieAtoZ.com/2013/09/diy-modern-farmhouse-table.html

I had loved the king size panel headboard so I knew I wanted to build that, I also built the platform and remainder of the frame from the farmhouse king bed plan.  It took me a while to get this built but was totally worth it.  

My garage has the concret lip so I chopped the legs running along the wall to sit on top of the lip.  Additionally, the garage floor is at a slight incline so I took more time to cut each leg to ensure the shelf was level and didn't slant with the floor incline.

I absolutely loved Michaela's Kitchen Island (http://ana-white.com/2010/03/plans-michaelas-kitchen-island.html), so I modified it to suit my needs of having a table to place my cacti in the winter months. I modified the size, removed one of the shelves, and left the drawers out so that I could put my Texas stars.

Fancy X Desk goes Entryway table. Built this with instructions for the Fancy X Desk. Shortened the desk down to 4 feet. Love the way it came out - mixed my own stain color for the top and used homemade wood filler made of the planed wood chips and gorilla glue. The stain on the top is so amazing you cannot even tell where the wood was joined. Loved the plans Ana! Will be sharing later on my blog www.HelloILiveHere.com

Fun to build altered the doll plan a bit with a spare peice of plywood to match the toddler bed better.