Community Brag Posts
Back Yard
![](/sites/default/files/CA%20Backyard.jpeg)
This is my homemade backyard inspired by plans from Ana. Used Ana's previous post to build all pieces. Stained in Mission Oak and bought pillows from Lowe's. Succulents from a local nursery.
Coffee Table
2 piece lounge
2 chairs
Ice chest
Planter Box
Comments
Mon, 05/15/2023 - 10:51
Lovely Set Up!
Your backyard looks amazing, well done! Thank you so much for sharing.
Basic changing table for a besty
![](/sites/default/files/3154837752_1385429795.jpg)
This was a quick and easy build. My friend needed a changing table and I had several scraps left from a toy box build. I will mention that using 2x2 firring strips is always my worst nightmare. They're rounded, never straight, and full of knots. They just don't give that professional feel. I had to use 1/2"x3" preferred pine on the ends in order for them to sit flush inside the 2x2's. Used the kreg pocket holes and assembly was easy. The changing pad frame on top attaches to the back with an L bracket so they can remove it and still use the table down the road. I hope they enjoy it for many years.
![](/sites/default/files/3154837753_1385429795.jpg)
Husky farmhouse Table
![](/sites/default/files/image_6.png)
This project took me no time at all. If you pick up straight boards and purchase the legs, this shouldn't take more than a few hours to build.
![](/sites/default/files/image_7.png)
![](/sites/default/files/image_230.jpeg)
![](/sites/default/files/image_234.jpeg)
$220 total
Brushed on and almost immediately wiped off.
Full Size Modern Farmhouse Bed
![](/sites/default/files/BF16CAC4-A76B-4EE3-9563-9D4B8990ABB6.jpeg)
We made the full size bed. We added 4 inches of height on the bed so there was room to slide a twin mattress underneath.
6' Barn Door Console
![](/sites/default/files/signal-2023-05-20-211605_002_0.jpeg)
I used the 6' modification of the 8' model. I used 2x6s for the top, and most of the pieces were cheap lumber, like furring strips. The color and stain are a bit darker in person.
Comments
tryde modified coffee table
I built this coffee table for my wife for christmas, it came out really nice. I didnt make it as wide to accomodate our living room space. the plans were really easy to follow and i had a lot of fun building this project. One thing i would recommend for this table is to get a plane of some kind to get all the planks flush with each other. For the legs i used cedar 4x4s because pine 4x4s are not available anywhere around me, that didnt matter too too much because i stained the table dark anyways. We are very happy with this table and thank you ana for such great plans to follow. now hopefully ana in her busy life will find time to post a farmhouse tallboy dresser from pottery barn to match our farmhouse bedside tables
Sturdy work bench plus...
![](/sites/default/files/3154837891_1385623946.jpg)
Added a peg board and a couple of extra shelves... Great design.
![](/sites/default/files/3154837893_1385623946.jpg)
Grandy Sliding Door Console
![](/sites/default/files/IMG_4528.jpg)
This was a lot of work and a bit of frustration but now that it's done it was well worth it!!
![](/sites/default/files/IMG_4529.jpg)
Minwax Weathered Oak
Narrow Console Table
![](/sites/default/files/70984126_10107208783242598_3472442747707719680_o.jpg)
This past weekend I build Ana's Narrow Console table. I went Saturday evening to pick up the boards and cut them. I completed the whole project late Sunday afternoon. I don't have a nailer so in-between the project I switched to self-tapping screws and it became even quicker because using the ol' fashioned hammer and nails was difficult and time consuming. Cutting the angles was a first for me, and it is not bad at all! I was very intimidated first but so glad I took that first step! Also, I just watched her video countless times to ensure I was doing it correctly, and that helped the most ;). It is very lightweight and I did not need any assistance in carrying the table. I truly, truly believe anyone can do this!
![](/sites/default/files/71190621_10107208783277528_3922545364594327552_o.jpg)
![](/sites/default/files/71277763_10107208783586908_4561402207773130752_o.jpg)
Comments
Single Lounger
![](/sites/default/files/Image-1%20%281%29.jpg)
I loved the simple look and have admired similar loungers at Pottery Barn. Even if I had the money I feel it's a waste to pay for what they charge. I knew there were plans somewhere to make something similar for a fraction of the cost. So happy I found this site!
I have many tools at home so I needed to purchase the lumber, hardware (screws, hinges, etc.), stain, and sealer. I would say it was about roughly $100/chair (rounding up) - not including the cushions. Those I found at Lowe's for about $60/each.
I haven't made anything like this before so I made the first one and took my time. I really enjoyed the process and thought the instructions were simple to follow. I have some skills and basic knowledge so I didn't feel like this was too difficult. I love the way they turned out! I did the 2nd chair the following Saturday. It took most of the day including the finishing. I only took a few hours to put one together. If I had help, would have been less, no doubt. I plan to make a double lounger to match these soon.
I will agree with some of the other posts that the legs seem a little "flimsy." I went ahead with the orginal plan and they've held up with no problem for a year in the Texas summer heat with lots of activity and use - including our dogs! So, I guess it's just fine. I may use something sturdier for the double lounger since it would hold more weight.
I highly recommend these loungers to cut costs! Also, the plan is not too difficult for anyone with little experience.
![](/sites/default/files/Image-1.jpg)
Barn door console
![](/sites/default/files/B18E7D83-DFE1-4433-B0B6-C29F6BCE62EC.jpeg)
Great project for the family. My wife and 2 daughter helped build and paint the barn door console. I used Red Oak for the top and put 4 coats of the stain to get the darker look. The plans had a get cut list and easy step by step instructions. I modified the plans slightly to fit the room in my house.
![](/sites/default/files/617B871D-3438-4FCA-83B8-C86D566A3245.jpeg)
![](/sites/default/files/A20077AD-C7ED-4203-B6A2-22FC1A227B5C.jpeg)
![](/sites/default/files/FD9E7132-18F1-43F8-988E-C844ED4A62DA.jpeg)
![](/sites/default/files/2B312C03-AD40-484B-AB6B-587BB4A53E08_0.jpeg)
![](/sites/default/files/AB9F5784-81D4-4A2F-83F9-6245BAE1A09E_0.jpeg)
Dun Edwards paint - Glen Falls
Comments
Buffet with reclaimed window
![](/sites/default/files/Buffet%20w%20window.jpg)
Six foot by 22" buffet with open shelves and reclaimed window cabinet door.
Comments
Storage Bin/"Christmas Basket"
Made this project from the Storage Bin design. We have an annual holiday party at work. Since I work in the timber program for Ca Fish & Wildlife, I decided to make a project out of wood, stuff it with firewood and s'mores makings. I applied our logo using the instructions here: http://www.unexpectedelegance.com/2011/09/01/wax-paper-transfer-tutoria…
Super happy with the results.
![](/sites/default/files/3154838149_1386216405.jpg)
![](/sites/default/files/3154838151_1386216405.jpg)
![](/sites/default/files/3154838152_1386216405.jpg)
Comments
Sectional Sofa for Teen room
![](/sites/default/files/31BB50C8-7B84-4A88-9D5B-209DF3FB26FA.jpeg)
My teenage niece asked me to build her a cool seating area for her new bedroom. So I used Ana White’s Outdoor Sofa with Sectional for the plans. I modified the overall size for the space and the seat depth to accommodate the seat cushions she bought, painted it white, and let her add pillows and blankets to make it soft and cozy. She loves it and I’m the coolest Aunt ever!!
![](/sites/default/files/5E406280-8708-4AB0-9DD1-FAE45A0CF94F.jpeg)
![](/sites/default/files/310586F6-3946-491E-9D10-80B4334EC8BD.jpeg)
Comments
Simple Outdoor Bench
![](/sites/default/files/3154804669_1327459273.jpg)
Very easy plan to follow! This was my first project and also my first time to use power tools. I made a few mistakes, but learned from them all and was very pleased with/proud of the bench!
![](/sites/default/files/3154804670_1327459273.jpg)
Comments
In reply to 1st Time Made by Martha Jones DW
Sat, 01/28/2012 - 18:32
Thanks!
Thanks! There were several little mistakes I made but I'm going to go ahead and just use the excuse that it adds character! Learned a lot that I'll be able to apply to my future projects.
Modified Recycling Console - First Build!
![](/sites/default/files/3154838255_1386467005.png)
We needed to make sure this was strong enough to hold a 20 gallon fish tank.So, we decided to use poplar wood and stained it with golden mahogany. The height was adjusted to 37 inches.
Modified 4x4 Truss Beam Table
![](/sites/default/files/1_120.jpg)
Build the 4x4 Truss Beam Table base with the Fancy X Farmhouse Table top shortened to 7' (84") for my wife's birthday! We love how it looks and can not wait to build the matching benches! Also, this is my first time attempting a building project and Ana-White Plan. The plans are very easy to follow and execute!!
![](/sites/default/files/4_39.jpg)
![](/sites/default/files/2_49.jpg)
![](/sites/default/files/3_41.jpg)
Sherwin Williams - Cotton White
2x4 outdoor couch
![](/sites/default/files/43A45B66-23F7-4414-A4B1-34C3E18FA639.jpeg)
Love my outdoor couch. Easy to build and follow plans. Thanks Ana!
Comments
My First Project (Home Depot Inspired Bookcase)
My wife was watching TV and she saw a Bookshelf on a Home Depot commercial with diagonal shelving. She kept telling me how much she wanted a bookshelf like that. So, for my first wood project ever, I decided to try and tackle it for her. It is slightly over 7 feet wide and a little over 6 feet tall. I am currently trying to learn sketchup8 to create plans for this project.
Unfortunately I didn't use a certain plan from Ana's site for this project, but you can find any bookcase plan and place the diagonal shelves in place of the horizontal ones.
![](/sites/default/files/3154805744_1328066769.jpg)
![](/sites/default/files/3154805745_1328066769.jpg)
Comments
Tue, 01/31/2012 - 21:02
Beautiful!
So you totally just solved my no fireplace dilemma! I think I'm going to take your design here and leave an open space for some electric logs. Thank you so much for sharing, it is really stunning!
In reply to Very cool by nicwolford
Wed, 02/01/2012 - 06:10
Slots
Those were challenging because, as I stated before I am not even a beginner. I was going to try and use my little trim router to cut them but I learned quickly routers cause much saw dust. I don't have a router table and my router is small. I decided to use my miter saw. I measured out where the slots should go and Cut the outside boarders of the slots with my miter saw. I don't have a jig saw either so I chiseled the the remaining piece to form the slot. I then used my small trim router to smooth out the slots. After I got in a groove it went pretty fast. It was a lot of Slots. Like I said before, I am very new and I know there are easier ways to do this lol. Just a hint..If you ever use interlocking slots and plan on painting the project, I wouldn't make the slots exact to the bare wood. The primer and paint add to the thickness of the wood so it is important to take this into consideration before cutting the slots. Again, very new to this.
Wed, 02/01/2012 - 06:28
Your not new anymore...
I don't think that you can say that your "new to this" any more. You cut your teeth on quite an ambitious project. You did a fantastic job! And just wait till you learn sketchup, the FUN you will have! Keep up the great work and keep posting! Can't wait to see your next project!
Wed, 02/01/2012 - 12:32
I've never seen a diagonal
I've never seen a diagonal bookcase before, but I like this one. You'll never have to worry about straightening books that have fallen on their sides either.
Sat, 02/04/2012 - 15:22
So impressed!
This book case looks truly expensive! My excuse is always a lack of tools, but look what you did with what you had! Everything is square and precisely done.
In reply to So impressed! by Debi G
Sat, 02/04/2012 - 19:26
Thank you
Thank you for your kind words. I appreciate all the input I have been getting. I look forward to posting more projects and getting more ideas.
Tue, 02/07/2012 - 12:16
I really hope you post your
I really hope you post your plans! You did a nice job. I'd like to use a very scaled down version of this to make a wine rack in an open cupboard we have over our sink. Might have to pick your brain later. ;)
Tue, 02/07/2012 - 20:25
Great Job!!
I saw the same commercial your wife saw, and kept trying to describe the bookshelf to my husband. Now I can show him. Thanks for posting,and I hope you figure out Sketch Up so we can see your plans!
In reply to Great Job!! by mrs2tone
Wed, 02/22/2012 - 20:33
Sketchup
I have started to figure it out a little bit. I thank you for the comments and am close to finishing the plans. Again thank you for your comments
Thu, 05/10/2012 - 17:29
Wow! That is wonderful...I
Wow! That is wonderful...I have a similar one that I LOVE and wanted for years. It was in the Pottery Barn Catalog and OUTRAGEOUSLY priced...I don't remember exactly the $$. When "Hold Everything", a subsidiary of PB, went out of business, I got the second to last one they had in stock for $200. AND...When I saw the HD commercial I realized I might be able to make a more custom version someday. Your story inspired me to plan something, and also to perhaps even open up and learn SketchUp which I downloaded months ago...Look forward to more projects!
Mon, 10/15/2012 - 20:33
Well it's crooked. LOL Jk I
Well it's crooked. LOL Jk I think it is insanely awesome! I hope my first project is even half as good!
Mon, 07/15/2013 - 10:09
Great Idea
Great beautiful first build! Thank you for this great idea that triggered an idea for myself. Going take this format, and adjust the dimensions to fit as a wine shelf.
Comments
Ana White
Mon, 09/09/2019 - 09:00
So beautiful on your porch! …
So beautiful on your porch! The chairs add such a nice wood element to the space. Love it!