Community Brag Posts

Wanted a side table to go in dining room for drinks and spare dishes to go on when we have get togethers. It was a pretty simple that was fun and got it done in a weekend during naptimes and the spare moment here and there thanks to my husband having time off. I didn’t want a second shelf because that’s just a ladder for my toddlers! I decided to go with a truss look since it fit my furtinure a bit more and I like it having a bit of a decorative look in the back.

My husband and I built this for our son's bedroom using all five of Ana’s series of plans for the cubby wall system. We did pretty well, especially considering that it was our very first building project. We made the media component of the wall unit the same width as the two sides since we didn’t need it to fit a wide screen TV. My hubby was thrilled that the drawers went together beautifully. The doors turned out a little “off” -- luckily the room has a beach theme so this piece fits right in with the beach shack look!

I made this easy and cheap Christmas tree wall shelf to add character to my guest bathroom.  I went through all my wood stash and found enough wood to build this project with! 

Make sure to pay attention to the long and short point directions in Ana's plans.  Since I was hanging this above my toilet, I didn't need the hooks so I just omitted the bottom piece all together.

I ended up using wood glue and a nail gun to put everything together so it went really quickly. 

I painted the whole tree with green chalk paint and distressed the edges with sandpaper.  Hung it up with L brackets in a stud.

Fun and easy project!  Thank you Ana!!

The design is good, it all goes together nicely. Mid-stream, I decided to use some Mahogany I had sitting around to make the face frame.

This was my first experience with drawers and predictably I had all kinds of self-inflicted problems. Most notably placing the bracket backwards and then I foolishly convinced myself I could put the top on before I put the drawer face frame on. (I could have but I would have never aligned it correctly)

I finally came together; it fits well in the intended spot & my wife likes it.

I have a small kitchen with no room for a table and no storage space. When I saw the plan for this kitchen island i knew it would fit perfectly in our space and a project my husband and I could work on together. It took several days in total, but we had to work around the kids, so probably could be done faster if need be. It is made out of white pine, including the top and legs. We probably spent around $150, but we looked at several similar islands going for over $600 and not even made with wood. We are so pleased with the outcome. We cannot wait to get started on the bunk beds for our son.

Thanks Ana White!

My husband and I have never built anything.  We decided to build our teenage boy a desk, as I could not find anything I liked online.  The project was pretty simple for amateurs to follow.  The cutting and assembly was done in a day.  We decided to add the drawer and pull out shelf for the printer.  Really, figuring what color to stain it and the staining process was the most tedious.  We routered the drawer sides and the top of the desk for a nicer look.  So proud of our work and the fact that this will last our son for years to come.  

This was built as a nightstand/charging cabinet.  I made it a little deeper for more stability. I also replace the 4-5 drilled holes with a corded electrical/usb outlet that allows you to both plug electri cords and usb cords for electronics (about $10 online). I added a center 1 X 2 and magnet closers on the doors. I used unfinished wainscot for the center of the doors.

I made 4 Simple Lounge chairs and 3 Ottoman/Accent tables. They are made out of 1x3 and 1x2 furring strips. I was worried about how sturdy they were going to be but, in the end they turned out PERFECT!! We absolutely LOVE our new set!

I built this for a friend of a friend. They had seen a similar hall tree on line that ran between $300-$500. It was made of a mix of materials, including mdf and veneer. It was for newlyweds so I did the finishing (something I really hate) and I made the cushion. I had the mirror cut at a local glass shop, and had it cut a bit shorter than how it appeared in the picture they gave me - I was afraid someone would toss somthing onto the cushion and it would end up hitting the mirror.
They seemed happy with it. I hope to get a picture of it in place so that I can add it to my album titled "Look what Gramma made when she could still do things".

This is my first project! My friend and i were debating what to gift our friends for their anniversary. This was perfect. Good first time beginner project. 

I enjoyed making this project! My wife loves the table and benches.

We made this for my daughter's bedroom. There was not enough room for a canopy, so we adapted it a bit.

My wife has always been a huge fan of Ana White's website, and we've wanted to start making some of the projects now that our children are a bit older (5 yrs., 3yrs., 5 mos.). Plus, after finishing my Ph.D., I've finally found the time to begin woodworking as a hobby--and I love it!!!

This was our first project together. I did the building, and my wife completed the painting. The kids love the table, which we use as a breakfast and snack table for them.

Ana's plan was wonderfully simple and clear, and the materials were inexpensive and purchased at our local small town lumber store.

My only suggestion for others interested in building this project to be a food table is to consider using a solid piece of wood for the tabletop and perhaps the same for the chairs. We are constantly cleaning food gunk out of the seams between the joined tabletop planks. I imagine that this will require a bit more work for the chairs, but with little kids who make horrible messes with their food.

Blessings,
JB

I made this chair in pine based on the plan for the Bristol outdoor lounge chair. But I changed the dimensions to fit my pillow (21"x21") and I raised the seat (increased the length of the legs by 3.5"). I modified the armrests so that they don't cover up the pillow since I didn't want to lose 7" from the seat. I plan to use this indoors at our mountain cottage. It still needs to be sanded and stained, but I'm pretty pleased with the result. I may have to make a matching ottoman next.

This was a great project. Added diffrent door design which resulted to great outcome.

This was a fun project that ended up being a multi-use table! This was originally built as a small island for the kitchen but as the family grew it became a changing table! The top was purchased online at home depot, the base is made of douglas fir 2x4's and the corners accents are Simpson Strong-Tie ZMAX Galvanized 16-Gauge 2X Rigid Tie Connector available at HD for about $2 each. Thanks for looking! See more at my website analogwoodworks.com!

After the success of my first project, I had to go for #2. I loved not having to predrill and countersink anything on this...just pound away with my hammer. Since I had a bit more confidence about building, I was also able to move a lot faster on this project. I modified the plans by not adding a drawer and keeping the bottom a shelf, as well as adding smaller doors and maintaining an open shelf above them.