Community Brag Posts

Our outdoor furniture from Costco was falling apart but the cushions were still in great shape so I decided to design the furniture around the existing cushion dimensions. I used all Cedar wood and stained it with Australian Timber Oil Honey Teak stain. The table design was from a picture I saw on another site.

I found this website a while ago, but it was a while before I had an opportunity to utilize the plans as I have a long honey-do list of things around the house (insulation, installing new light fixtures, putting up crown moulding) that took priority. Well, I finally got some time and Hillary's locker cabinet was a perfect first project.

We have a small Cape Cod with no separate entryway, so our coats, shoes, bags, keys, and other accessories ended up on our windowsill or the dining room table, which was okay until dinner started and we had to clear it all off before eating. It was aggravating to say the least. So the narrow cabinet was the perfect solution. I made a few changes to the plan - added doors instead of drawers, and changed some dimensions to fit my space, and I also added trim pieces to the inside shelves to finish it off a little more - and it worked out great. The spaces between the doors and the trim are not even, and while that bothers me a little, I'll just have to improve on my next piece...and there will be a next piece. Soon.

Thanks Ana and Hillary!

I built this media console several months ago. In the beginning I saw the one Ridge Media Console and loved it, but I don't have the right tools to make the drawers like the plans, so I decided to take a couple of plans to make mine different. I also wanted to build a console that was easy enough because I'm still a beginner. I also loved the Benchwright media console and used some of the plans to get what I wanted. The storage flips down by adding euro hinges. And I added doors. I added my own silver decorative pieces. At 1st I thought that was too much silver, but now I like it. When I first built it I would pass by it and had to remind myself I did not buy this at a store, but built it. I can't say how much it cost because frankly I'm not that organized just yet. Since I'm a beginner I go back and forth to Lowes getting something here and there. Lowes and me have this weird relationship. They wonder why I'm there AGAIN; and I just keep coming back, AGAIN. They better watch it, I may dump them for Home Depot - lol.

For the finish I used Rustoleum stains and finishes. I use this because I don't wipe them off and they dry quicker. I use one coat and it's done. Dries by the end of the day and ready for poly. I added the pic for the stain, but Lowes didn't have my colors on their website (shame on you Lowes).

The colors I used were 1 part black cherry and 2 parts dark walnut. I loved the colors so much I plan on using them for the rest of my builds in my living and dining rooms.

Wanted a Raskog cart from IKEA but honestly it was too small. Used scraps from my craft desk build and purchased the wheels from IKEA. Just need to finish her off. Love Ana's plans. This is my third build from her plans. 

Made the portable worktable as my craft table. I'm limited on space so the fold down table was just the key. Thank you Ana. You are an amazing carpenter & inspiration to me. You make your plans so easy to read & follow. Thank you so much. I can't wait to make more of your plans. ❤️

I've always wanted an Adironback chair, now I have 4! This was inspired by Ana's Adironback chair. Because we're mad Patriots fans, the logo had to be painted on as well. For the seat, I made it wider, more curved, and alternated 1x2 and 1x4's to give it a beachy look. The arms are wide to hold beverages and chip bowls. All the curves were drawn by my daughter, the wonderful artist.
Super sturdy chair.

Made this table for my daughter. She stained it golden oak, and plans to paint over it and distress. Its a handy good sized table for a desk or small dining table. Will put more pics when finished. I used 1x4s for the table top instead of 2x4's. I used the kreg jig to join the top together.

The daughter painted it with white milk paint, 2 coats. She did some sanding, and then went over it with brewed coffee.

48" X 60" built this A few years ago from pallets I picked up on side of Road

I just had to build these for my two kids. Thanks Ana!

Play Teepee used 4 yds of fabrics, 2.5 yd of webbing, bias tape, ribbon, heat and bond double sided adhesive, and 4 1x2s at 8 ft.

I have been wanting outdoor seating by my pool forever but couldn't afford anything I liked. When I came across Ana White's plans for the outdoor sectional I knew I had to build two. They are just what I was wanting and cost under $200. It took my brother & I one afternoon to buy the supplies and put it all together. Since this furniture is outdoors 24/7, I had to caulk the seams & paint the whole thing. That process took two days. The biggest expense was of course the cushions from Home Depot that Ana White recommends for this sectional. I have to admit, they are well worth every penny. They look amazing! Can't wait to spruce them up with some throw pillows.

We made this table from the farmhouse table plan but used 4x4s for the legs and slightly wider (2x10) boards for the top.

So my wife found this on Pinterest last month and loved it. We have been searching for something to go behind our sectional couch in our den. When she showed it to me I discreetly emailed it to myself as a plan was forming in my head. She was working nights for the month of December so I worked on it in the garage in the evenings and hid it in the crawl space so she wouldn't see it. She woke up Christmas morning to find it in place with a bow (clearly made by a man who is much better at carpentry than bow making) attached and was very surprised and excited.

I distressed the wood using several highly complicated techniques such as hitting it with a hammer, dropping a bag of screws on it, and scratching it with a screwdriver. It was then sanded and stained with Minwax Provincial 211. I applied two coats of satin polyurethane for protection.

I liked the look of the hex head screws so after painting them flat black I actually used them to hold the top on.

Platform bed and headboard