Community Brag Posts

I wanted a new TV and my wife wanted new furniture...we both won...

From a pine tree in the back yard to a great looking crib that will hopefully stay in the family for generations.

We had to take down a pine in the back yard to make room for a barn so I had it milled into lumber for future projects. I was able to get the majority of the lumber I needed from that tree, everything except for the 4x4's and 2x6's. I got what I thought was pine but after staining it I quickly realized that it was not (maybe hemlock?). The grain didnt match at all so I had to track down some new wood and remake the pieces. Boy was that frustrating! I also bothered myself to hide as many fasteners from (finished) view as possible. It made the project a bit more involved but the finished product made it all worth it. 

I made his Barn door out of the wood that was left in our garage when we moved in. Using (7) 2x6 boards and adding stain sanding and hardware, it became a super functional industrial rustic (is that a design style LOL) door! (I added a cat door to for our cat ;))

Console table built for clients 

My kids needed a picnic table and I was less than impressed with what the stores in the area had to offer... I ended up with some leftover wood from the builders in our developing neighborhood and voila! A picnic table. It took 2 or 3 hours to construct, and a few more for sanding and painting.

One afternoon and $0 spent!
I had wanted a potting table for my front porch, and finally got it done one afternoon while my son was napping! I wanted a table that was functional but pretty enough to be front and center.
My table is a combination of Ana's and the one I found on 2 Crafty 4 My Skirt (http://2crafty4myskirt.blogspot.com/2012/04/mothers-day-potting-table.h…). I combined and modified the plans so that I could use scraps (could easily be built with pallet wood, too), so my dimension are a little weird, I know. My table is 39 1/2" from bottom to top (the top shelf sits at 36") x 44" wide. It's on the tall side, but it works well for our space.
Tools Used:
Compound miter saw
Kreg Jig system
Ryobi driver
Kreg screws

My version of Fancy X Farmhouse table with a built in copper cooler!!

For the past few years our family has been enjoying building together.  Our garage became a dumping ground for all the scraps and it got to the point where the piles became unmanagable.  We build this cart from almost 100% scraps.  The only piece that cost a bit where the casters, but we wanted to ensure that we could move the cart around in the garage  so we purchased the most heavy duty ones at the big box store.  This project took about one hour a night for a few days.  Very pleased with how it turned out.  Now that we have our garage back we can get back to building.  

We have been searching for 3 years to find a sectional that would fit around our fire pit. The only thing we ever found were two curved sofas that cost $5000 needless to say, we kept looking. When I saw the weatherly plans I knew that I could modify them to curve around the fire pit. The piece is made up of three sofa sized pieces and connected by two triangular pieces. The HARDEST part of this project was finding the dimensions for the triangle pieces. It took 2 days, my dad and brother throwing trigonometry formulas at me, and a lot of trial and error. After that it was easy! I combined the plans for the sofa and the loveseat, so the loveseat would have the ends on them.

This is my second project - I made an outdoor cookng surface modeled after the Tryde coffee table. The 4x4's are 36" tall and made it 21" deep - this is great for my outdoor grilling station.

I truely enjoy this desig, and I try to use it for anything going forward.

I love the deep color that the minwax red mahogany stain brings - this has 3 coats of polyurethane.

If you notice the table next to the tryde table - my father in law came up with a design to make the grill tops taller than the standard configuration - I will try to send a cad version of this to Ana so that she can post it up on the site.

the ground is not level with the slate.

I had trouble with the angled cuts not fitting perfectly. I have a circular saw, not a table saw or miter saw, so I had to measure with a protractor and mark, then try to follow my lines exactly. Tedious, but I like the table. It is mad heavy though!

We built this feeding area to complement the plumbing pipe open shelving we installed in our dining room. The shelves for the bowls are mounted to the wall (use anchors or screw into the studs) and the water bowl stand is free-standing. This new setup takes up much less space and is easier to clean around than the usual mat and bowls on the floor.

We built the shelves and water stand from reclaimed wood - each shelf is 8.5" x 22.5". The pipes are spray-painted in flat black. 

Tips: 

 - trace around your bowls on your piece of wood and then cut the holes out smaller than the circles you drew so that the bowl edges rest on the wood and hold the bowl in place.

 - to get a silky-smooth surface on the wood, after waxing and buffing, do a final buffing with extra fine steel wool.

See link to blog for details on the build and more photos.

We used MDF board for the frame, and covered the cut edges with veneer. We used Poplar premium wood from Lowes's for drawer fronts and cabinet door. We shortened the length by about six inches, and replaced the three drawers on top with one large drawer so that it functions better for us.

Farmhouse table base with drinkholder/planter inserts.  Done up w Colorado pride!

The plans for the table and chairs started with your designs and then evolved. The chairs are 2x2 an upgrade from 1x3s. We find them to be much sturdier. The total cost for the table and chairs is @$600 without finish. 

Our house came with a laundry room (yeah! : ) ) that had a small closet with a basic wire shelf and a door. I thought "how silly" and I knew there had to be a better use of the space. Inspired by Ana's laundry dresser I decided some shelves for dirty laundry would be better then putting it on the floor and the other shelves are nice for other things.

It took me weeks to complete because I have small children and needed them to not be near the saw or paint and I needed time for the paint to dry. Actual time was not long though. Could probably be done in a weekend (allowing paint to dry).

Materials-
2 sheetes of plywood. I got 4 shelves from one sheet so I have a large leftover piece
primer
paint
braces
self tapping screws

I cut the shelves with a circular saw to fit exactly then primed and painted. I found the studs and marked them at 13, 26, 39, 52, and 65 inches and then put in braces and put in a shelf. I had to do one set of braces and a shelf at a time or the next shelf wouldn't fit since it was a tight fit.

The 12" between each shelf is perfect for laundry items and other things we store there. It has made the whole laundry room feel much bigger and more organized.