Community Brag Posts

Total cost per chair about $70 each. Cedar, Marine varnish & stainless screws are quite expensive. For the arm rest I used 1x6 Cedar rather than 1x4. All wood cut, sanded and varnished. All screws pre-drilled. All Cedar countersunk.

I got my inspiration for this bed from the Fillman Platform Bed. I left the platform off, used 2x6s, and added bun feet. I love how low it is to the ground because I don't have to worry about my kiddos rolling off at night or jumping and getting hurt.

Easy to build. Just used 1x4's and 1x3's.  

Fairly straight forward build.  Used construction grade lumber which gave a rustic look.

Nice and easy plan to build this beautiful table and dog crate.

This table was a cinch to put together and only took a couple of hours

My dad and I built these chairs by following Ana's Adirondack plan, and then adding our own curved back. We also routed all the edges to give the entire chair a rounded feel. We also built the simple little round side table to use with the chairs.

This cart was smaller then I expected but makes a great little addition to my office

Followed the plans closely. Stained before assembly for the two color look.

My wife started looking at expensive patio sets, which I thought were not worth the price, so I decided to build a picnic table. This is not the cheapest table out there, but it's built to last for years!! I used a high quality cedar as I got a price cut from a friend. I also used deck screws, so there would be no rusty screws!! The table top measures 7' long and looks like one you would see at a state park, notHome Depot!

I took the original plans from the Farmhouse Table - Updated Pocket Hole Plans - and I modified it so that my table could be countertop height and join up to my counter -  like a modified breakfast bar, so this table it countertop high, and is also more narrow and alittle longer.  I can easily pull it away from the wall and sit 6 people around it.  It is now my favorite place in the house!  

My husband and I built this on Sunday- I love how it turned out!  The hardest part was finding cushions, and carrying it up a flight of stairs!

I built this using the plans for the Perfect End Table. I made it a little taller and jazzed up the shelf a bit.  The whole project cost me less than $35!

I had a lot of fun with this project! It was quick, and I already had everything I needed on hand. I have been wanting to get more practice with my jigsaw and this project was perfect for that. I used one cedar picket for the whole box and still had some left over. I added a burlap bow and made the tail with some extra pieces of rope and my glue gun. It was a breeze!

This is the table I made for my wife using 2x lumber...I used the epoxy resin finish and it gives it a beautiful look and finish...my wife, family and friends love it...I'm very pleased with how well it turned out...