Community Brag Posts

Followed the plans pretty close on this one. 

I absolutely love my rendition of the Fancy X Farmhouse Table (and bench).  I took Ana's plans and combined them with some of the details from charmingimperfections.com to create the vision in my mind of exactly what i wanted.  The build was not bad at all but the Kreg Jig is a MUST have tool!  This was my frst experience with the KREG jig and i am now looking forward to many more DIY Builds! :)

We built the camp loft bed for our 5 year old sons birthday. He wanted a firefighter bed, but we wanted something that would be a little more "flexible" for his room. The camp bed was perfect for him! The stairs were too deep for the room configuration, so we did not include the stairs, and instead purchased a sturdy stepstool from IKEA to match the bed. The double bonus is that when we read to him a night we can move the step stool and stand on it while we read the story! I made the firefighter station curtain/tent and attached it with a tension rod. We also constructed a large toy box on wheels to slide underneath the platform for his big toys like race tracks, etc. The bed is very sturdy, the set up is perfect for his small room, and he loves it. The bed was very easy to construct.

I purchased a harvest table from a local store that sells only solid wood furniture.  The store had the option of purchasing a bench.  I decided that I could save some cash and make the harvest bench myself.

For details, check out my blog - http://www.woodworkingfourdummies.com/blog/harvest-bench

Cheers,

Ian

This is our 20-year-old bathroom vanity, retrofitted to resemble the Napoleon Sink Console. This old cabinet is the standard builder size from the 90’s -- 30” wide x 29 ½” tall x 21” deep – fits a 31” x 22” sink top. The 2 outside drawers are working drawers, and the 2 inside are faux (just fronts). It was a weekend project. Since the sink stayed in place, I had to figure out something for the drawers to slide on. I had 3 sticks of ¾” x ¾” S4S in the garage, so I used these and fashioned a frame to hold the drawers, and also used it on the sides of the drawers as slides (figured the frame out as I went along). I used up some scrap 1x12 to cut the drawer faces and supports at the inside back of the cabinet. Since the space was so tight, I used some scrap 1x2 as bracing attached to the original frame, and attached the added face frame to that. The doors are ½” x 1 ½” craft board and ¼” birch plywood. The drawers are 3/8” x 3 ½” craft board with some ¼” plywood on the bottoms. I re-used the existing hinges and used some knobs from a multi-pack (available from Target) and some left over paint that was on hand. I bought about $30 of materials in addition to my scraps.
Now that I’ve got this one under my belt, it’ll be easier to do this in the other 2 bathrooms. I’ll probably use some 1x2’s instead of the s4s if I have to go out and buy the materials for the next one, it’ll just have slightly different measurements.

I used 1x6 cypress wood for the top as well as middle and bottom shelves. This wood was given to me from my in-laws and came from an old corn crib that was torn down on their farm. The remaining 2x2's, 2x4's, corner brackets and screws were picked up as used or broken pieces from a local Habitat for Humanity Re-Store. I also picked up the tung oil I finished with from the same place.  The pics show the various stages of build from the initial raw pieces that had been planed/sanded to using Hillary's tea and vinegar oxidation; after a good bit of tung oil was used; finally right before I gave it away as a Christmas gift. I had never worked with old cypress wood previously and was very impressed with how it accepted the oxidation (nice and light) as well as the oil finish. I preserved the old nail holes in the wood as much as possible and you might even notice I left some the white paint from the old corn crib that was on the end of one piece. Great plans - fun little project!

We struggled with the angles because we made the table bigger than this tutorial suggests but all in all, awesome build.

This is my first Anna White project. It turned out really well.

Fun build.  Took me a few weeks but enjoyed it.  Gave a ton of storage for my sons room.

I made this garden trellis with cheap 6' cedar fence pickets ripped down to 1 1/2" strips. Get the free plans and tutorial at The Handyman's Daughter!

I built this as a Christmas gift. I used Minwax honey oak stain for the top and bottom shelf. 

My first Ana project!  Different dimension and no drawers but still based off the original plans. Love it!

My first project!!! The house we live in has 4 closets in the entire house.. so we're quite in need of storage. I was really hoping the bookcase would work out, to relieve the jam-packed linen closet. I'm so happy with it, and with the learning experience. I didn't do the moulding option, more or less because I'm impatient and want to get the next project going. Thanks Ana for the inspiration and the plans!!

I made this little tool caddy in one afternoon from some 1 by various width board scraps.  I pretty much followed Ana's 'Give the Gift of Building' plan for construction, while being able to use up some scrap wood.  I was making this as a 'just because' gift for my BFF, so I made it to fit three of those free little floral vases, filled it with flowers from my yard, and voilà! 

This is a great beginner project, or one for anyone who needs a little something to project during a free afternoon.