Community Brag Posts

I built the headboard out of reclaimed barn wood that I purchased on Craigslist. The seller worked for the DOT and was responsible for demolition of old barns that were in the path of new roads in North Carolina. He takes the barns down and salvages all of the wood he can and sells it on Craigslist. The wood I purchased used to be the interior walls of an 80+ year old barn that used to stand somewhere outside of Raleigh. I built the bed mostly out of red oak plywood, but the posts for the footboard are cedar (the only non-pressure treated 4x4's I could find in my area). I used Minwax Wood Finish Classic Gray for the stain. The drawer pulls are hand made from a local NC blacksmith named Northern Crescent Iron who I found on Etsy. Here is a link to his Etsy site: https://www.etsy.com/shop/NorthernCrescentIron

This was a fun project and my wife LOVES the size of the six drawers. :)

Great fun project...cant wait to do some more........

My first project of this size.  I think it turned out great!  Did a gray weathered stain and drybrushed bright white over the base.  Sanded the top 60, 120, 220, 320, and just for fun I finished it with 1000 grit.  Stained dark walnut, finished with three coats of poly, sanding 320 in between coats.  Love this table!!!!

The well-laid out plans from this site made it a pleasure to build. I used pine for everything and stained with Rust-Oleum Early American. Also, I did three coats of Minwax Clear Satin Polycrylic. My wife and I decided to use 8 hooks because we have two young children who could not reach the top row of hooks.

My husband made these for our 5 year old daughter and our 1 year old granddaughter. They turned out adorable! Our first project with a kreg jig, best tool ever! It took a few weekends, but we are also building a house. The longest time was spend waiting for paint to dry!

This is the end Table I built from Anna's plans. If you wanna watch how I built this table. go to https://youtu.be/qaFfvO2nfm0

I built the kitchen as a Christmas present. I still need to put the oven door on but still love how it all came out. I just started a blog and as I was posting my latest blog post I realized how obsessed I am with all of your plans!! Thanks so much :) I'm not sure how long it took to build because I only get to work in the garage an hour or two a few nights a week.

Made this corner cabinet for my office to shelve all my music books and camera gear.  It has tidied up things perfectly!  No more cluttery bookshelves taking up valuable floor space!  This was a super easy build- used leftover bead board I had sitting around and some extra moulding for the edges of the shelves.  I hand routered the top and footer, giving it a nice little detail.  Love it!

Thanks for your video, Ana!

I had a bunch of salvage wood boards and wanted to offer my wife the space she'd always wanted for gardening for our wedding anniversary.

Your plans inspired me to build her this bench, adapting the design to the materials I had.

She loved it!!

Elodie :-)

I've been drooling over those custom closet organizers for years, but they were either too expensive, not well made or some combination of not right for us. So seeing Ana's master closet plan really sent my imagination soaring. My challenge. My master closet is a small walk-in 5'x7' so I did have to do some adjusting. I love having a place for shoes and sweaters. One of my favorite parts is the continuous top shelf that connects all the parts together forming a big 'U'. I used my Kreg jig to connect each of those pieces. Anyway, thanks Ana White for the inspiration.

Until now I've been doing the majority of my project cuts with my $30 jigsaw. Yes, it took about ten times as long as yes it was not quite as accurate so I ended up putting more time into sanding to clean things up after but I just didn't feel comfortable using the circular saw.

Well, I've got a list a mile long of things I'd like to build so it's time to  put on my big girl panties and get comfortable with the circular saw. So...I read a ton of tips and tricks online and saw a number of different guides.

Taking a little from a few different pictures of guides and using the scrap wood from an old dresser, I put this together. I clamp it to the top of my work table and go to town. I love it and now feel comfortable using the circular saw. I'm sure it's helped me make more accurate, straighter cuts than I would otherwise have made too. 

A friend asked me to make a headboard for him as he couldn't find anything online or in store that he really liked. 

I was up for the challenge and always love working with wood to make new and exciting things so, challenge accepted. 

This was my first attempt at a headboard and I think it turned out pretty nice. 

Knotty pine face with a cedar frame. 

Looking forward to my next project! 

This was my very first wood working project since working around my grandfather's shop 20 years ago as a child. I had to buy a few tools to get it done (circular saw, Kreg Jig), but it was a great learning experience!

I made a rookie move of wiping up excess wood glue, which didn't take the stain at all. I had to remove that glue with a Dremel tool and spot restain. Since then, I've been told to let the glue drops dry next time and just chisel off after they are dry.

Since this was my first project, I had to buy EVERYTHING I needed, so my costs were a little higher. Now that I have some groundwork laid, the next projects will be a snap.

I also highly recommend the Rockwell Jawhorse product, it made working with the Kreg Jig super easy!

I followed the No Sew Cayden Nailhead Bar Height Stool but added 2 more inches to the height.  I also left off the foam and leather to have a more Rustic look.  I used a burn tool found at Hobby Lobby to burn the logo that was traced on to bar stool tops.   It an easy build and the stools came out to less that $40 a piece. These took me a few weeks to completely finish but I had 6 of them built within a day.  The burning and the staining took the longest but these are easy enough to build in a weekend.