Community Brag Posts

This sideboard buffet took me several months to complete mostly because I have little kids and had to have my husband home to give me the time I needed! The hardware and paint was the most expensive piece. I first stained it with kona stain then painted it with ASCP in Provence. I still need to put the wire mesh in doors but I'm still searching for options:-) This was my first project with drawers and it was not easy!

This plan was so easy to follow. I love my new workbench!

This was my 3rd project...and quite an undertaking. My first project was the dollhouse bookshelf (plans available on this site). Second project was custom designed under bed drawers, which now house many thousands of LEGOs. And then, the dresser. It was my first time using the Kreg pocket hole joinery. Once I learned the setup it went fairly quickly, though keeping boards square and flush was challenging and not always successful. But, that's why there are sanders.

The plans are awesome!! Loved the shopping list. Walking down the wood aisle selecting and checking. Sorry, no coupons or 2-4-1 specials. Being an amateur taking on an "advanced" project I am a bit hesitant in commenting on the plans or design changes. But, I feel it necessary so please don't hate me.

* add to cut list: 4 - 2x2@31" - Dresser Side (sides). Needed in Step 3.

* Step 9: (picture) to keep the drawers from tipping while opened I added a stop above each dresser drawer slide. These were made from 1x2s cut to 4" - 5" and beveled on the front. I used a 1x2 + 1/8" - 1/4" thick scrap strip together as a spacer for the drawer drawer slides and a little bit of wiggle room.

* Step 10: (picture) add a 2x4x2 block under the bottom center support and drawer slides. This will help distribute the weight to, and add a place for,
attaching the center leg in Step 11.

* Step 11: instead of screwing the feet directly into the dresser bottom use a table leg straight plate mount.

*Step 16: I mitered the drawer trim corners so it would match the mitered corners of the decorative cap moulding.

Instead of painting I stained. This was my first staining experience. We were trying to match the color of an existing chest of drawers. Overall, I think it turned out very well. Next time I might prestain the pieces prior to assembly as there are a few spots that glue prevented good absorption. And yes, I thought I was meticulous cleaning the drips with a damp rag.

Hope you enjoy this as much as I did building it and will using it.

This is from the Rebecca Media Center project. With my wife being an avid book collector and my children being avid toy collectors, we were quicking running out of space for both. Being the amazing husband and father that I am, I made this project and solved both issues. I had a wall that was 13 feet wide and thought this would be a great place for some bookcases. The plans provided were almost perfect. I only had to change the sizes by a few inches to make it fit the wall and raise to the ceiling. I also added a string of led lights across the top. These were cheap, hid well, use little power and came with a dimmer to adjust the brightness. I really like them. I think they came from hit lights for around $30.

I made a smaller version of the Tryde End Table with Shelf. I made 2 of them from 6 2X4's

I wanted a bar lounge on my patio so I built it from your plans. We had a July 4th party for the my family. It was so nice.
Everyone was surprised I had done it myself.
I also made a corner table but unfortunately it doesn’t show in pictures.
Thank you! Your plans are amazingly easy.

Donna-Tennessee

The top was made with reclaimed wood and we used pine for the base. We decided to go for a "chunky look" so we used 2x4's for the sides and skirt. We used 1x3's for the shelf slats and also spaced them to give it an airy feel. We had to customize the size due to the limited space in the kitchen. This was finished with an antique white paint for the base, mahogony stain for the top and finished with a water based poly for durability,

Slightly wider and not as deep as the original plans to match the other furniture in the room.

I needed a tv stand that wasn't ugly. This was one of my first projects, and I learned a lot from it. It's not perfect (the drawers don't work well), but it looks nice :)

Vegetable bin chalk painted and hand distressed.

Ana White Coffee table.

We needed a daybed for our lanai and when I saw these plans I knew it was perfect. We built the bed in a day and then painted later when we had time. It is just the place for taking a nap and because it is on a covered lanai, weatherproofing was not an issue.

We followed the instructions and it was very easy to complete! Thanks Ana!!

I purchased a twin girls captins bed for my daughter to grow into but she wasn't quite big enough for it yet so I had my husband convert it into a twin size crib!!!! Im in love with how it turned out. My husband Free hand a crown on a sheet of ply wood and cut it out. I used quilt batting and covered it with pink material and did the tips of crown in purple.

Made the birdfeeder by Ana for my Daughter in-law's birthday. She loves it and so does her cat. My bandsaw stopped working, so had to cut the center out with an oscilatting saw. Surprisingly it worked really well.
The hardest part was figuring out where to get suction cups without the hooks on them. Ended up at Michaels where I found some rated for 7 pounds of weight. They seem to be holding up well. I ended up screwing them into the back of the birdhouse. Tried construction adhesive and it just did not hold.