Community Brag Posts

My sons tiny box room needed updating. He wanted something more grown up. The brief was "a high bed with a den underneath". As with all Ana White plans it was easy to follow and gave me the inspiration to build something bespoke to a very limited space. I have added a desk for him to do homework. He's over the moon with it. Thank you for the inspiration. - Harry

I built these as one of my first project with the Kreg Jig...It worked great! I stained them with the left over sample cans of my behr deck stains from when we were deciding what to put on the deck. They turned out to be great and the perfect size for our deck!

I did a near direct copy of the tool trugs from Jamie and Ana using some 1/2" birch plywood and 1/2" craft wood from Home Depot. I was really happy with the ipswich pine stain that darkened the wood and gave it less of an unfinished look. 

Followed the plans to build this.

I used the following pully from McMaster (if you don't have an account, you might know a friend or someone who does):

https://www.mcmaster.com/#3434t116/=162dxqq

I've attached prints for the barn door stuff I made and thought it would be nice to share. 

Thanks!

Recipe/Tablet Stand- This turned into a 5 minute build after cutting and sanding.

Cut list is 2 pieces 1x4 -10” long

2 pieces 1x2 - 7”long

1piece 1x2 for strapping on the back,

1piece 1x4-6” long then cut in half diagonally (30 degrees) for the back kickstand.

Glue and brad nailed together. - Brittany M

I saw a cabinet like this on Pottery Barn's website (for $600) and I knew I wanted to build it for my 12 year old niece and could do it cheaper. I have only built one other thing so I am a beginner. I do not recommend this as a first project because if it wasn't for my husband figuring out the "lazy susan" part and fixing a couple other "oops" then it would not have turned out as great as it did.

I started with the plans for the 5 Cube Tower Bookshelf and then went from there. I ended up with only 4 shelves because of a miscalculation on my part. I cut off the legs and added crown molding to the top. Used plywood for the 3 layered base and quarter round for the decorative look. The base is heavy, which I wanted because of the 2 pegs on opposite sides for hanging things (she's 12 and purses, scarfs, clothes...there is no telling what will be hung there). I added molding to both side of each opening so that as it spun things would not slide off. I have no explanation for the lazy susan because my husband figured all of that out.

The Cork board and mirrors were easy. I bought the cork in a pack of 4 squares at Walmart and the mirrors in a pack of 6 squares from Lowes. We placed and glued them on before adding the molding around the edge. Fyi: I tried to use the $5 full mirror from Walmart but it was to wide. I bought some cute buttons and cut off the loop part to glue flat metal tacks to the back. She now has decorative thumb tacks. I painted it white and then top coated it with polyurethane.

We absolutely love this and so does she. It is in her room and I think looks amazing. Can't wait to share my next projects that are almost complete.

A simple headboard with new pine, distressed to resemble worn barn wood or other reclaimed lumber.  I used a wire brush drill bit to eat away at the soft wood of the outside frame, raising the grain and adding a tremendous amount of texture.  The inside planks are full-width boards that I scored with a circular saw to create false joints.  Each section was stained with a different hue to emulate individual reclaimed planks.  I coated with a layer of semi-gloss polycrylic and then a coat of clear cream wax.

This was the first project I did from Ana, and the plans and directions were excellent. My son is 20 months old with a Thomas the Tank Engine obsession....I had told my wife I would make a train table for him for Christmas and this was the one she found. The little man was extremely excited on Christmas morning, and it turns out I ended up building a babysitter in the process.

Saw a bunch of TV stands in this style on Etsy but they are just WAY too expensive. Found out I could simply order the hairpin legs from Etsy and build one myself. Much cheaper! I chose cedar. It allowed me to go the extra width I wanted (6 foot) and keep the project lightweight. It is a soft wood and prone to scratches and dents, but most of our other furniture is reclaimed and upcycled so I'm not worried about wear and tear. 

Using the Benchmark Octagon table plans found here for the inspiration for our poker table we completely customized the top and modified the base to suit our needs! The dining top cover is yet to be finished but we are definitely thrilled with the result thus far especially seeing as though it was our first ever build! 

My husband needed a place to store his stuff--maps, yes, but also cords, hard drives, and other things he didn't want the kids to get into. I took the coffee table plan, essentially cut it in half, then raised it up to fit four drawers. The best part was that I only made three drawers--the bottom one is extra-tall to fit his extra-tall stuff, but it has false drawer fronts. I also opted to skip the caster wheels.

I wanted to learn how to make furniture, so I decided this "Rebecca Media Console" knock-off would be a good first project. I made it a little deeper (15in) and narrower (36in) because I only wanted the center piece to put the Blu-ray player and some DVDs, cds, games, etc. I also added some holes to each section so that I can run electronics to it in the future if needed.

Painted with Valspar "Gilded Pesto" and Minwax Polycrilic - both in satin.

I definitely learned a lot from this project and it was surprisingly fun! There several errors in it, but I wanted to post pictures to help others who may be interested in modifying the original plans.

***Sorry for the side-ways pics. I can't find a place to change the orientation***

This was a fun and pretty easy project.  My oldest son has been asking for some bunkbeds for awhile now, so I was glad when I ran into these plans.  

The project was realitively cheap, but if I could do it again, I would have used nicer material to avoid some of the finishing work.  I built this in one day, but spent sevral weeks on the finishing work, which included two coats of primer and LOTS of wood filler.  I took all the edges through my router, so everything would have a nice rounded edge.  I also decided to put a cap on the headboard, footboard and rail to finish off the project a little.  I liked the look of thes being added.  

The original project does not include slats in the pricing and knowing that firrying boards were not strong enough for this task I really wondered what I was going to do.  Buying a ton of 1x2's can add up fast, so I decided to make them out of cheap 2x4's.  I bought a few 10' 2x4's that allowed me to get six slats out of each of them after I ripped them on my table saw.  They ended up being very sturdy 1 3/4" x 1 1/2".  

******If I was going to do this project again, I would mark the location of every screw, as I hit some of the screws holding the 2x6's of the headboard and footboard with the lag bolts I used to hold the main rails.  I would have also painted all of the pieces individually, put it together and than touched it up, as there were many hard to reach areas with the paint.  This would have improved the finish*******

Honestly think it needs a new name, because when all said and done works and looks great.
Going to be making another one at some point, and make some alterations to it to fit a need, and suggestions.
It took me longer then it probably would for some, but then again I am disabled and can only work for short bursts.
Hard to see in the photos, but i used brass knobs on the drawers. I also used briwax on the parts that slide, (the rail, and bottom of drawer edges..  works nicely..  

Made this for a friend of mine with the intention of doing the oxidized vinegar finish. Unfortunately, I didn't read the directions too well and ended up with an awful brassy red color. So I had to remove that (quite the task) and then stain. The end result is still something pretty rustic since the vinegar discolored the wood some. X's were tricky because my miter saw didn't cut that angle, but it worked out in the end.