Community Brag Posts

Farmhouse headboard

I built this headboard a while back but just never got around to posting it.  I distressed the wood, painted it mint green and applied a chocolate glaze. 

 

 

Estimated Cost
$100.00
Estimated Time Investment
Day Project (6-9 Hours)
Finish Used
Mint green and chocolate glaze
Recommended Skill Level
Starter Project

Comments

Benchwright Coffee Table

This is a replica of the Pottery Barn benchwright coffee table.  I altered Ana's plans slightly by changing the design of the legs to be 2.25" by 2". I added full extension drawer slides.  The finish is a combination of transtint shellac base coat, gel stain, transtint dye, and poly. 

 

 

Built from Plan(s)
Estimated Cost
$250.00
Estimated Time Investment
Week Long Project (20 Hours or More)
Recommended Skill Level
Intermediate

Comments

coloradonp

Sun, 01/31/2016 - 18:56

Hi! The finish is absolutely gorgeous. I was wondering if you could give a little bit more detail on which products you used for the finish. I've only used oil based stains and I'm not quite sure what the transtint dye is. Thanks!

Rustic X Console Table

My take on the Rustic X Console.

Built from Plan(s)
Estimated Cost
150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Minwax Wood Finish Oil-Based Slate Semi-Transparent
Recommended Skill Level
Intermediate

Comments

DIY Barn Door Pantry

We have been a subscriber of Ann White's YouTube channel for quite some time. With our kitchen remodel we needed an idea for our pantry. All I can say is thank you Ann White!

Built from Plan(s)

Comments

Full Size Storage Bed

With a new baby on the way, my husband, Steve and I had to move our 2yr old son out of the nursery and into his big boy bedroom. After casually looking at storage beds and falling over in shock at the prices, I came across Ana’s plans for the storage bed. Knowing that Steve is extremely handy but had not attempted to build furniture before, I started talking him into building this bed. He was sold the moment I told him that we would save close to $2400 by building it ourselves. This was a longer than anticipated project mainly due to Steve’s full time work schedule, my inablility to handle stain fumes, allowing a toddler to “help” build his bed and working around said toddler’s nap schedule. We modified Ana’s plans by adding some trim to the cubby hutch, omitting the doors on the small hutch and sizing everything to a full size bed. We also omitted the shelves on the storage headboard since we weren’t going to use them with the side towers. I am absolutely in LOVE with the final result and have a long list of other projects that we will be building in the near future.

Built from Plan(s)
Estimated Cost
$600
Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Paint or Stain Color/Type: Minwax Polyshades in Pecan Gloss

Finishing Technique: Steve primed the wood first with Minwax Pre-Stain Wood Conditioner then, added two coats of Minwax Polyshades in Pecan Gloss.

Recommended Skill Level
Intermediate

Outdoor Hot Tub Table

Submitted by Anonymous (not verified) on Mon, 10/04/2021 - 13:33

I needed a table along side our hot tub, primarily for drinks or appetizers while using the hot tub. The farmhouse table plan worked out perfectly to its height and how it fit in well with the structure of the hot tub. It also does double duty with my grill directly across from it allowing me some storage shelves or grill items.

Built from Plan(s)

Comments

Tapered plant box

Submitted by Anonymous (not verified) on Mon, 10/04/2021 - 18:20

I was looking for an inexpensive way to dress up my deck and when I saw your tapered plant boxes I knew that was the gem I needed. I used pickets from a fence we took down and some 1 inch wood strips. I am planning on making more to line the new fence.

Built from Plan(s)

Comments

The Best addition to our home!

Submitted by alifrancis on Thu, 03/17/2011 - 15:05

This by far has been my favorite build.  Our front room is in the process of being revamped, and this is just the beginning.  With our garage now dedicated to building, our cars have been kicked to the street.  This means we actually use the front door now, so I took full advantage of making a piece of furniture that would allow for all the various items that get dumped on the floor when we walk in.  

I love that everyone has a cubby and shelf for the shoes.  My kids actually hang their backpacks up now when we get home from school and my husband can find his keys, wallet and sunglasses now! 

This was one of the bigger projects I have tackled, but well worth it.  I don't think my husband would have ever allowed me to buy this at PB for over $1000

Estimated Cost
$150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Primed the whole project with Kilz oderless primer and sanded it to get a nice finished. Painted it using the Martha Stewart Francesca Paint in eggshell finish from HD. I started with a brush but was unhappy with the look and did the rest of the project with a foam roller. After two coats of black, I finished it off with two coats of Minwax Polycrylic in the Satin finish. NOTE: I put three coats on the bench top and the shoe shelves just for more durability.
Recommended Skill Level
Beginner

Coffee station

Submitted by Anonymous (not verified) on Wed, 10/20/2021 - 14:39

I was inspired by your coffee station plans to build this unit. I added an upper shelf with gas pipping, along with LED lights under the shelf. This station has been very popular in our house.

Comments

A cottage bench with shoe rack

Only slightly modified cottage bench - I made the storage area bigger and added shelves to put my shoes. Only my second project so it's not perfect (especially the paint job) but I loooove it! Sure, the shoe rack I had was perfectly functional and bigger, but this is waaay prettier.

Found a perfect red oops paint at Lowes and I even added a little birdie stencil. I have a few more pieces I'm working on and hope to finish soon. Thank you Ana for the plans!
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Primer and two coats of paint, lightly sanded in between. I skipped the top coat because I want the red color to naturally fade with use.
Recommended Skill Level
Starter Project

Outdoor Sectional

I scaled back the length of the sofa by a few inches and I made the sectional only one seat to fit my space on the deck. This was my first woodworking project that I did by myself. I got the cushions for more than 1/2 off at Ikea so the whole project cost about $150 ($80 for the cushions). It took me about a week to complete but the total time was less than 10 hours to build and stain. I'm pretty happy with how it turned out.

Estimated Cost
$150
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
Pittsburgh Paints Stain & Sealant in One for Decks, Fences, & Siding in Walnut. I brushed on the exterior stain just like a paint. I did the top part of the sofa first, then flipped it over and stained the bottom. Read instructions on the label.
Recommended Skill Level
Beginner

Comments

My entry way bench in Hickory

Submitted by Anonymous (not verified) on Tue, 12/28/2021 - 12:19

The bench plans were super helpful!!

Built from Plan(s)

Comments

Not the Full Miter table design

Submitted by Hjmoore420 on Wed, 01/05/2022 - 12:50

while this is a great design I only needed the extra storage and work space so I just made one of the storage roll away from this plan. I had to alter slightly making them a bit smaller as the space I was making this to occupy had a width of 44 inches but it is an amazing amount of space provided. I will put a clear coat on but sanded, edged and its wokring great. the clearance all around is about .5 inch t fits in beautifully and decluttered my overly cluttered workspace. thanks so much for your Ideas Ana, they are always amazing.

Comments

Work Bench

Submitted by iluv2run on Tue, 01/23/2018 - 08:18

Work bench with casters came out great and already using it on my kitchen console.

Built from Plan(s)
Estimated Cost
$120
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Exterior paint
Recommended Skill Level
Beginner

Bedside End Tables

Submitted by Grace734 on Mon, 02/05/2018 - 07:38

These are made from the three drawer plans but modified the size to meet our needs and used planks for shelves instead of drawers. Painted white and black gel stain. 

 

UPDATE FROM ANA - We have received MANY requests for this plan and have created a plan inspired by this post here.

Shopping List (for ONE bedside table) + Tools

  • 1 - 1x2 @ 6 feet long
  • 5 - 1x4 @ 8 feet long
  • 2 - 2x2 @ 8 feet long
  • 1-1/4" and 2-1/2" pocket hole screws
  • 1-1/4" brad nails
  • wood glue
  • Kreg Jig
  • Compound Miter saw
  • Drill
  • Brad Nailer (18 guage)

Cut List (for ONE bedside table)

  • 4 - 1x2 @ 14" - Side panel trim
  • 8 - 1x4 @ 23-1/4" - Side panels
  • 4 - 2x2 @ 27-1/4" - Legs
  • 6 - 2x2 @ 14" - Shelf support
  • 8 - 1x4 @ 17" - Shelves
  • 5 - 1x4 @ 18" - Top

Cut 1x4s and 1x2s with miter saw. Layout side panel 1x4s as shown above.  Measure and cut 1x2 to length.  Nail the 1x2 to the 1x4s, two nails per overlap with glue.  Make sure your side panels are square.  Build two.

Drill 3/4" pocket holes on inside edge of 1x4 ends as shown above.  Cut 2x2s with compound miter saw. Attach to the 2x2 legs with 1-1/4" pocket hole screws.

Set Kreg Jig to 1-1/2" setting.  Drill 1-1/2" pocket holes on end of each 2x2, one per end.  Attach to 2x2s with wood glue as shown above.

Cut 1x4 shelf boards with compound miter saw.  Nail and glue to the inside of the project as shown above.

Cut 1x4 top boards with compound miter saw.  Nail and glue to top with 1-1/4" nails and wood glue.

If you wish to add a back, measure and cut from 1/4" plywood and attach with 3/4" brad nails.

Estimated Cost
100.00 for both.
Estimated Time Investment
Weekend Project (10-20 Hours)
Finish Used
One coat of eggshell white PPG
Two coats of ebony gel stain
Recommended Skill Level
Beginner

Comments

Outdoor Sofa

Submitted by dionneds on Sun, 04/10/2022 - 07:16

This was our first big project with our Kreg Jig. We adapted the plans to make the sofa 8' long. On Friday night, my husband did all the cuts and I pre-painted everything. With the help of our son, we had the whole sofa built in a few hours on Saturday morning. I puttied the visible holes, did a second coat of paint, and made custom cushions. The plans were very easy to follow. I followed the others' advice about pre-painting and assembling the back on a perfectly level surface. It came out better than I expected and it's super comfortable!

Comments

kdykes08

Mon, 04/11/2022 - 07:44

I want the plans for this one! I like this style a lot better. I really like how the bottom cushions are at a slant. I suck at modifying plans.

Seasonal And Holiday

Raised Garden Bed Planters and French Tuteur

Submitted by Anonymous (not verified) on Fri, 04/22/2022 - 08:16

I built some French Tuteur’s for the garden. 

Fresh and ready for my new raised beds. 

Comments

Laundry bins

Submitted by wy2ak on Mon, 05/07/2018 - 19:57

This was a build from a picture and made to fit into a space we have in the laundry room. Used the Kreg jig for much of it. 

Estimated Time Investment
Week Long Project (20 Hours or More)
Finish Used
Will be painted and distressed
Recommended Skill Level
Intermediate

Comments

House Number Planter

Submitted by Bradnag on Fri, 06/22/2018 - 09:46

Easy beginner project. I had a spare pressure-treated picket on hand, so I used it instead of cedar. We're repainting our house this summer, so I stained the wood to match our eventual new house color.

Estimated Cost
$25
Estimated Time Investment
An Hour or Two (0-2 Hours)
Finish Used
Minwax Water-based stain
Recommended Skill Level
Starter Project

Dress-up Storage finally!

Submitted by tannisg on Wed, 08/03/2011 - 17:10

I made this for my girls' huge collection of dress-up clothes. I had to modify the plans a little to fit more costumes, and also to try to fit the longer length. I was hoping the longer dresses would hang without filling the bottom quite so much, but to make it tall enough for that the little one wouldn't have been able to reach the hanger bar.

I ended up with 4 foot boards all around - 6 pieces of 1x12 cut to 4 feet long, including the shelf at the top.

The eight year old cut the letters out of scrapbook paper and we glued them on with elmers glue then varnished over it.

All in all it looks great and holds 4 big plastic totes worth of dress-up (11 Halloweens/4 little girls/5 flower girl dresses and miscellaneous other outfits).

Now I'm just hoping they'll learn to use hangers and it will stay neat and tidy!

Construction was very easy and went well - took us longer to shop than it did to build!

Painting on the other hand took a long time, mostly just to wait between coats. I used spray paint and some polyurethane to gloss it up.

Estimated Cost
$50
Finish Used
spray paint, polyurethane
Recommended Skill Level
Beginner