Community Brag Posts

So my wife got her new Country Sampler magazine the other day and she saw this table in there that she liked. After an hour of research I found the table at Becker Furniture World online. The table is called the Liberty Casual 2-Drawer 2-Shelf Sofa Table by Steve Silver. I decided to draw up some plans in my head and give it a shot. After 2 rounds of Home Depot warped 1x 12s we got the table together. Instead of making this a sofa table, I extended the table top out a little to make it into a console table. If you want to see my inspiration google search Liberty Casual 2-Drawer 2-Shelf Sofa Table by Steve Silver. If you like it let me know and I will give out the wood list and the cut list.

Compass rose dimensions: 22×22 (90 degree cross) tilt 45 degrees 16×16 (90 degree cross) then connect lines with a ruler, start with the 16" lines connect from outer point to 2" from center of the 22" crossed lines, once that star is complete make lines from point of the 22" lines to 2 1/2" down side of star adjacent to that point (hint: it's much easier to look at a picture of a compass rose while trying to sketch it). Cut sizes should turn out to be: 8- 9"×7"×2 1/2" triangles and 8- 8"×7"×2" triangles (hint: we had best results using a table saw to make all the cuts)...

I made this dollhouse as a cute way to store my daughters Shopkins collection.  It went together really quickly!

Building this Jewelry Cabinet was really fun and easier than I expected. I made one to give away as a birthday gift, could not resist making another to keep. I don't really have that much jewelry, I just think its gorgeous! I loved the look of the original posted project, that I wanted to duplicate it just as it was.

Made from large milled maple rough cut Lumber

2x4 sofa and Chair. I added a couple pieces to the back of the sofa to stop the cushions from slipping through and another 2x4 to the top for a little more height. Stained a dark teal.

When Ana posted plans for these a few weeks back I knew they would be perfect for the front of my house. Instead of putting them on the never ending "to do" list, I just made them!

I kreg jigged them all together.

I used wooden eggs from the craft store for the finials.

Lined them with landscaping fabric.

Fairly easy to make and I love them, but I think I need a couple more :)

I modified this plan to allow for interior storage space within the shelving. Rather than nailing the front board on, I attached two lower hinges so that it functions as a drop-down panel. The front panel then secures to the top board with a centrally located screw-in hook and eye (not visible if the top of your ledge is above eye-level).

We made some minor changes to the overall finish from the plans for the coffee and end tables, I had a hard time matching the stain color, as well as omitting the hardware (I painted it but we never got around to attaching it).

We had a console table that we were replacing (we bought it when we first moved in and I've never been overly thrilled with how it looked in the room) and hubby did a GREAT job incorporting the fireplace from that unit into the console table.

Over all, a fun and inexpensive set of living room furniture. Can't wait for our next preoject!! We're planning an "X" inspired dinning room table for 10. I'll be sure to post pictures!

We were looking for a cheap project for the weekend. We found the plans for the Tryde Coffee Table here on Ana White's site and we decided to give it a try. We knocked off about 10 inches so it would fit in the living room, what I found out was that 10 inches knock off allowed me to build side table with a few pieces of scrap wood we had sitting around in the garage. The plan is to build the matching entertainment center with hutch attachment. That will make my living room 90% built by me. The finish on this is Rustoleum American Accent Heirloom white with Minwax Walnut stain rubbed into the paint for the aged look and the top is dark walnut stain with 2 coats of poly.

I needed a bigger kid play room table because my girls have outgrown our play table and chairs from IKEA. We have a window seat, and it seems the consensus is that pedestal tables are the best for window seats, but they're not really my style. I let the big kid pick one, and she chose the triple pedestal farmhouse table! I obviously couldn't follow the plans for that, so I more used them for inspiration, and lessened the size of everything. **UPDATE** I posted plans for this modification here.

This was a great first project.  Thanks for the plans and the inspiration.
I needed to make a hall table so made a narrower version, and had to alter the dimensions to suit the metric system and readily available materials at Bunnings (Australia), and also made the upper and lower sections identical in height.  It ended up about 300mm deep because the shortest drawer runners I could find were 250mm. These are full extension Hafele side rails, opening 100% to make the most of the narrow depth.
The drawer fronts are from a single piece of reclaimed Oregon Pine sourced locally and then stained with various strengths of Victorian Antique Wood Dye from eBay.  The stain is natural/non-chemical and made from walnut husks - just dilute with water to the desired shade and worked well on this timber.
Thanks Ana and thanks Jamison!
 

Made this for my granddaughters from Ana White’s plans.

My sister needed outdoor chairs and these were perfect for her front porch. I made them as a birthday gift (she got them a few weeks early). The cushions were bought at Garden Ridge for $60 for each set and the wood was all scrap wood left over from other projects. These really are easy to make!

I am thinking of making the couch for my mom since the chairs turned out to be so comfortable and relaxing to sit on.

With the new addition to the family it seems that most holidays everyone in the family will be coming to our house. So with that in mind we needed a new table to fit everyone. Ana you great website has pulled me out of a jam yet again. Finding the plans for this table was a life saver. Hope you all enjoy!

For the finish I found a website that showed me how to mix steel wool, vinegar and tea together to make a beautiful stain. It took a couple coats and a couple days to dry but I think it turned out great. Even though it was kind of scary at first when it started to turn shades of green rather than a dark color but after the stain soaked in and it dried it turned out the way i wanted it.

My little sister is building her first garden this year, and had asked about a garden bed and bench. I found this plan on the Ana White site, and waited until the local Home Depot had cedar fence pickets on sale for $2.34 each. Once these were purchased, the 3 garden beds were put together easily with screws and some Titebond II, and then sprayed with spar urethane on the outside for further protection. I also took some live edge fir slabs I'd gotten for free from a lumbermills scrap pile, and cut, sanded, and stained them to put together a live edge bench. I assembled the bench using rabbet and tenon, and then further braced the legs with small L brackets that cant be seen from the front and some 3" screws from bench top to legs. After assembly, I spar-urethaned the bench with 4 coats for protection. My sister loved both the bench and her boxes. Thanks for the plan!