Community Brag Posts

I built four pieces of the sectional (1 corner, 3 reg) It took me a long weekend, I would come and go so actual hours are hard to estimate. For the stain I used steel wool and vinegar, followed up by strong black tea. Teak oil was used for the sealer. The second photo is a picture of one stained chair approx 30 mins after stain applied, the other one has no stain yet. The pillows I sewed myself, outdoor fabric is from Jo-anns (use the coupons!) and inserts are from ikea. The only large investment were the cushions! Pine Wood - FREE. My dad works for a lumber company. Outdoor fabric - Between $6 and $10 a yard Pillows - $3 for small, $6 for large Cushions - $29 each **my picture wont display correctly even though uploaded correctly!!!

There is 1x10 on the shopping list! This was the first cut to make and I realized no where does it say to grab a 1x10 board.  Other than that, the plans were great.  Definitely made some mistakes along the way but overall I am very pleased.  Thanks for the plans!

My building write-up goes with the post for the plans. The only thing I need to add here is the change I made on the toddler rail. The first one I did wasn't quite long enough for my little guy. He's quite the squirmmy bug at night, so he kept slipping off the bed with the shorter one. He never just really fell hard, but it was enough to wake him up a few times, so I added a little more length to the rail and it seems to be working much better. I'm excited to see how this bed will evolve :) Hoping to make a few additions to it a little further down the road!

I followed plan but added 20 extra inches and an extra woven insert plus an extra brace in center of seat.

Built from Ana's Dog Crate End Table plans. Used steel rods instead of wood slats.

I made this headboard last year. I got tired of my 5 year old shutting the door on my 2 year old, it was a large heavy old wooden door, so I took it off the hinges and had it sitting there staring at me forever. So I decided to make a headboard out of it. It was simple, just using the basics of the farmhouse bed around it. I love it :D

Entry Way Table. Although not made from one of your plans I wanted to share it as is the biggest thing I have made so far from my own design.

Used ana's plan as more so a guidance. The top is made out of 3/4inch hard maple planks glued/clamped together. The harder part was then planing the top down to ensure the top was relatively flat. All the other wood was pine.

The slats were stained golden oak and incurred 1 coat of polyurathane. Really love this piece. 

Fireplace Bumpus. I decided to add a hearth. I am so pleased with project.

Anther creation of my own but this would easily be created from Ana's plans for this wall shelf. There isn’t much cupboard storage in our kitchen so when friends gave us a sideboard they didn’t have use for & it fit perfectly in one of our kitchen’s oddly spaced corners we were thrilled. It became our “Toasting Station” where the toaster & Panini grill are. I decided that we needed matching shelving to house our “Carbs” since it was much easier to make toast & sandwiches when the bread was right above the toasting implements.

I scaled down the fancy hall tree plans to 39" wide to fit along our entry way wall. I also added shelves for shoes. It was a great birthday present for my wife, thanks Ana! 

This was my first project using an Ana White plan. I thought the plans were easy to understand and follow which made the project go smooth. I am a fan of painted and distressed furniture so I went with that look for this project. After painting the tables I used a hand sander to scuff up the corners and then added "worm holes" using a hammer and nail.

I used the plans from your site to build this table for a friend. I made a couple of little design changes just to make it look different. The plans were very easy to follow, and I had a lot of fun putting this together. I did have a small problem with the pine stock wanting to bow and twist, but that was taken care of with the planer and sander.

 These chairs turned out awesome!!! Go Royals! Go Tigers! The step-by-step directions were great and easy to follow. We went with a fun twist on the Royals chair by cutting out the top with the scroll saw to look like the crown. Turned out great, couldn't be happier with the outcome and will definitely be making more!