Community Brag Posts

I saw a post on Fixthisbuildthat.com about making wall art.  It looked super cool so I thought i would give it a shot.  My wife loved the first one so I made two more per her request.  These are pretty easy to do if you have a table saw and a miter saw.

Loved these plans. Top unit was built exactly to specs. Bottom unit was built to accommodate one column of cans. I have also built one for my sis-in-law and will be building one more for this pantry. Love this project!

I followed the plan almost exactly, I just made it to fit the space that I had. It was super easy and I love the way it looks! And I used contact paper from target to decorate the drawer face and the shelf. I also made the shelf a pull-out shelf using the same type of drawer pulls as the drawer. i made that shelf the same width that I made the drawer and it fit perfectly!

The longest part of this project was drying time for stain and paint and such. I did not include that time in estimate for time to build.

I used the plans to build my island, but I'm using it more like an extra counter. I reduced the depth by about 4 inches so it would fit in the space better. I did all my cuts with a circular saw, and I can recommend using a table saw and/or chop saw to get straighter cuts. The gem of the island is the concrete countertop. I poured 2 bags of concrete reinforced by rebar, darkened with a charcoal colorant. This was an experiment to see if concrete countertops would work for our whole kitchen. Success! 

Ana read my mind! I was telling my husband that I wanted "L" shaped loft beds for our girls abouttwo weeks before she posted these plans! As soon as I saw them we went and got our lumber. So excited to have these done and the girls love them!

DIY Ladder Shelf to use as a plant stand on our courtyard deck.

I built these for my daughter's birthday, after she showed me a set of night stands that resembled these from the site. I used cedar with a steel wool and viniger stain to give them a aged look. With 4 coats of a water based urathane as a finish. Your plans were accurate and simple to follow. Thanks

Our girls had made do with hand me down room furniture and decor( youngest 2, out of 5 girls). It was time to give them a space they love. I have never built anything other than slight upcycle projects. Slightly modifying this or that , never just starting with lumber and a plan. They picked the farmhouse beds and my husband was gone for 3 weeks backpacking, so off to buy lumber. Not as easy NO ONE HAS UNTREATED 4x4 posts!!!!! i called 3 counties, almost cried, to order was 3 weeks, or just cant get them. Finally found a cedar and cypress mill 1 hr away. Hopped in the car and off i went to load up.I had 2 beds to do so the second one went faster. What i learned?
1. even after predrilling you will do best hand screwing screws. Cypress was really hard in places and a stripped screw equals stress.( just like there is no crying in baseball, there is also no crying in carpentry)
2. the 2x4 that is under the 2x6 on headboard and footboard should be cut AFTER you assemble the 1x6 and 1x4 base. Much easier than making cuts with a circular saw on 1x6
3. your hands will feel like they were run over after day 1 of sanding, it will pass and get better.
4. perfect is not possible. It probably not even preferable. You want perfect? That is a machine
The room still needs some special touches, lamps, nicknacks, etc. cannot paint , rental. so sad. oh well

Tables for my unhealthy sewing machine habit. :)

Super fun project!!

so i put this storage shed on the outside wall of my garage and then i put my dust collector inside it and cut a hole for the pipe to into the garage. It's nice and out of the way now. I adjusted the size a bit to make it fit more of my outside tools like the trimmer and blower. Its not in the picture but I also extended the roof about 30 inches over the side to park the lawn mower under it. If I were to do it again I'd make it even bigger.

Very excited to have finished my second build! My daughter was so excited about these shelves, too. She even helped pick up her play area so we could get a nice picture. I only have a small wagon, so all the big cuts were done at Home Depot. Best part of this project: with the cuts completed in-store, this project took about the same amount of time to put together as a similar IKEA shelf, only no Allen wrenches were involved.

Used the Kreg Jig for the table top. I followed Ana White's Youtube Video "How to Build a Tabletop" for instructions on how to do it. 

Weeklong project for all three. Started on a Saturday and had it in the dining room and eating a meal the next Saturday!

2 wood pallets, 1 2x4 from an old wall teardown, and an old door we were going to pitch = 1 free workbench!

(used the extra pallet wood to make the decor sign. I wanted to make it girly. :) )

I spent about 2 weeks off and on working on this project. I was happy with the outcome. It was a project for my daughter for her 23rd birthday. She loved it! Thank you for the plans!