Community Brag Posts

I absolutely love how this coffee and end table set have completed my living room. Each one took me about a day to complete and $80 or less!! Excellent, detailed plans resulting in a gorgeous piece. Thank you! 

This was the second part of my Tryde media center build. You can read about the console build here.

This part of the project was very quick to put together, I spent a lot of time reading the brag board and looking at pictures of what others produced.  I really appreciate when people upload high res pictures of their builds so you can really look at the details - I've tried to do the same on my blog post about this project in case you needed further information (see link below).

I made the plan as per Ana's original, with some modifications.  These were:

• added a back kickboard at the base for stability
• added trim around the back and sides at the base to stop it toppling over
• added felt to the feet to avoid scratching my console underneath (worked so hard on that one!)
• added 'L' shaped brackets to join the two pieces together, for added stability (check my previous post for more details on this)
• changed the orientation of the beadboard on the back to be vertical and not horizontal (I just preferred it this way)
• after seeing Perchik's build of the Tryde media center I shamelessly copied his idea to extend out the trim around the top.  It looks much better wrapped around than jutting out the front, a little less severe I think

I hope you would give this project a go, as a hutch it is very simple to put together for a beginner and quite satisfying.  To get more information about my build please read my blog post where I go in to a lot more detail (and leave a comment too, I'd love to know what you think!)

Happy building!

This was my first real woodworking project and I loved it! I had a big helper (my Dad), who has a full woodworking shop teach me how to use the different tools and assist with building. It took a while longer than the plans say because we did some extras like powersanding and rounding off all the edges on each piece before assembling it. My Dad was very picky about it having a polished look! Plus, I insisted on my Dad teaching me, not doing everything for me. We also predrilled and glued on 16 hinges so it would fold. That definitely took four hands to do and the majority of the time.
My 'small' helper (our last name is Small) and son Dominic is almost two and loves using it. In hindsight, I would have made it a couple inches less wide overall to fit better in our kitchen that has limited counter space. And would have painted it prior to screwing the sides together with the hinges to make it easier to paint. However, I built it at my Dad's over the weekend, then painted it later. I chose the bright green colour so it would be playful and gender neutral to pass on once we no longer need it.
Thanks for the inspiration and great plans! I will be back for more projects!!!!

This is my first DIY build project and it turned out awesome. For some reason I was unable to find untreated 4x4's anywhere in Hawaii, so I took two 2x4's and attached them by countersinking wood screws. Beware, the dimensions of this project are massive. I scaled down the measurements drastically to fit in my living room with my sectional.

I painted the entire cabinet a dark blue, then painted over it again with an antique white. After it was completely dried I sanded it all down to give it a distressed look. I used antique label holders for the drawer pulls.

I love my new photo ledges. I had a huge space on my wall and these ledges are perfect. The ledges were so easy to make. I got a kreg jig for my birthday (I never thought I would ask for a tool for a birthday present) and I have gotten so much use out of it. I saw similar ledges at pottery barn for 10 times the cost of this DIY project. I saved so much with these ledges. The kreg jig has already paid for itself. The ledges make it super easy to switch out photos and I love being able to display so many fun photos. Everyone who sees these ledges loves them!! This was my first project. Thanks Ana for the great plans!

I saw this table on Pinterest and knew that I needed to have one in my life. I then bought a saw for my husband, for his birthday, and you can guess what happened. We followed the directions, except we made the table and bench a little longer in order to accomodate more people (I wanted at least 12 people to be able to sit at the same table). This was our first wood-working project and we learned a LOT. It took more time than we anticipated but it was well worth it.

This is a great place to put on shoes and hang up your coat. My husband loves it. You can place your shoes on the shelf under the bench.

First time building furniture. This turned out much better than I thought. After this I probably could've build the farmhouse table myself instead of paying way too much for my wood dining table. Only if I have found Ana's site sooner. :)

Having a Kreg jig also made the whole process much easier.

I built this console over about 2 months. I really wanted a barnwood look so I found this lumber place that sells pine that puts it through a machine and roughs it up on one side. I also added my own saw marks to it, screwdriver dents, rake dents, etc. to rough it up some more. Real barnwood is expensive and often isn't straight, etc. and since I was using this in my kitchen as a countertop I didn't want any spaces in my countertop. This was about a third of the price of barnwood. I wasn't sure how the look of it would turn out, but I think it comes pretty close to looking like the real deal! My husband helped me with the sliding door mechanism. We used pulleys for it and cut metal down to size. We discovered that using a nut and bolt on it didn't work, it just loosened and would come off so instead of using a nut and bolt to secure the pulley to the metal, we used a clevis pin and some washers. Works amazing! This was my first big build and I am very happy with how it turned out! Behind the sliding doors there is one shelf each. We have found there is so much room for storage!

I'm a furniture builder now! This is actually the fourth project built from Ana's plans, but the first one complete and gifted. I bought my materials in the morning, and had it together by late afternoon. Now choosing colors, trim and do-dads to embellish was a whole nuther thing. I opted for chalk paint with a wax finish, and distressed her. She has mirrors on both sides as well as two, double hooks for hats, belts and jewelry.

My grand daughter is one pleased princess. Me too! I'm proud of myself.

Thanks Ana for the terrific instructions, encouragement and education you provide.

We built this dog kennel as a donation to a fundraiser for our favorite dog rescue. It was auctioned off at the silent auction and all the money went to the dogs! :)

We used cheap furring strips for the majority of the project. We also had some leftover beadboard so we used that for the sides & back panel. We painted the base antique white and made a nice top out of some scrap lumber & old hardwood plywood. It took about an afternoon to assemble but another few days to sand and paint. We finished it while all 4 sides were separate to make it easier and it was still a pain to paint. This would be a great project to have a paint sprayer because it is sooo hard to avoid drips with this design.

The whole piece cost us almost nothing to make and we love how it turned out. We need to make ourselves one for our dogs!

The best part of this project was seeing it go home to someone who loves it and all the profits go to the Basset Hound Rescue!

Thanks Ana for the plans we couldn't have done it without you!

My bed frame dimensions were 60 wide by 80 length. So that is the inside demension after assembly. My headboard posts were cut to 54". Headboard panels are 31.5" (11- 6" boards). My posts were made from combining two 2x4s together. I plan on mounting the metal bed frame to the inside of the bed rails.

We are going for a rustic look in our teen sons bedroom. He has some large books that will not fit onto his bookshelf so a pallet wall shelf seemed like a perfect solution.

This project literally took five minutes. If you don't have a sawsall it would probably take around 30 but still pretty quick.